Index index by Group index by Distribution index by Vendor index by creation date index by Name Mirrors Help Search

chrony-3.2-lp152.13.3.2 RPM for aarch64

From OpenSuSE Ports Leap 15.2 updates for aarch64

Name: chrony Distribution: openSUSE Leap 15.2
Version: 3.2 Vendor: openSUSE
Release: lp152.13.3.2 Build date: Fri Oct 23 07:18:47 2020
Group: Productivity/Networking/Other Build host: armbuild02
Size: 555244 Source RPM: chrony-3.2-lp152.13.3.2.src.rpm
Summary: System Clock Synchronization Client and Server
Chrony is an implementation of the Network Time Protocol (NTP). It can
synchronize the system clock with NTP servers, reference clocks (e.g. a
GPS receiver), and manual input using wristwatch and keyboard. It can
also operate as an NTPv4 (RFC 5905) server and peer to provide a time
service to other computers in the network.

Chrony consists of two programs: chronyd and chronyc.

Chronyd is a daemon which runs in the background on the system. It
obtains measurements of the system clock’s offset relative to time
servers on other systems via the network and adjusts the system time
accordingly. For isolated systems, the user can periodically enter the
correct time by hand (using chronyc). In either case, chronyd
determines the rate at which the computer gains or loses time, and
compensates for this. Chronyd can act as either a client or a server.

Chronyc provides a user interface to chronyd for monitoring its
performance and configuring various settings. It can do so while
running on the same computer as the chronyd instance it is controlling
or a different computer.






* Tue Sep 29 2020 Reinhard Max <>
  - Integrate three upstream patches to fix an infinite loop in
    chronyc (bsc#1171806).
    * chrony-select-timeout.patch
    * chrony-gettimeofday.patch
    * chrony-urandom.patch
* Wed May 27 2020 Reinhard Max <>
  - Use iburst in the default pool statements to speed up initial
    synchronisation (bsc#1172113).
* Fri Mar 27 2020 Reinhard Max <>
  - Read runtime servers from /var/run/netconfig/chrony.servers to
    fix bsc#1099272 and bsc#1161119.
  - Move chrony-helper to /usr/lib/chrony/helper, because there
    should be no executables in /usr/share.
  - Add chrony-pool-suse and chrony-pool-openSUSE subpackages that
    preconfigure chrony to use NTP servers from the  respective
    pools for SUSE and openSUSE (bsc#1156884, SLE-11424).
  - Add chrony-pool-empty to still allow installing chrony without
    preconfigured servers.
* Wed Jan 08 2020 Reinhard Max <>
  - bsc#1159840: Add chrony-ntp-era-split.patch from upstream to fix
    "make check" builds made after 2019-12-20. Existing installations
    do not need to be updated as the bug only affects the test, but
    not chrony itself.
* Wed Mar 20 2019 Reinhard Max <>
  - Fix ordering and dependencies of chronyd.service, so that it is
    started after name resolution is up (bsc#1129914).
  - Add chrony-service-ordering.patch
* Fri Dec 14 2018 Martin Pluskal <>
  - Make sure to generate correct sysconfig file (boo#1117147)
* Wed Apr 18 2018
  - Added /etc/chrony.d/ directory to the package (bsc#1083597)
    Modifed default chrony.conf to add "include /etc/chrony.d/*"
* Mon Mar 26 2018
  - Use %license instead of %doc [bsc#1082318]
* Wed Mar 14 2018
  - Fix name of fillup template (was never installed before)
  - Fix Requires for fillup, it's used in post, not pre.
* Fri Feb 09 2018
  - Enable pps support
* Thu Nov 23 2017
  - Replace references to /var/adm/fillup-templates with new
    %_fillupdir macro (boo#1069468)
* Thu Oct 26 2017
  - Cleanup spec file:
    * Drop pre systemd support
    * Run spec-cleaner
* Tue Oct 24 2017
  - Modified the spec file to comment out the pool statement
    in chrony.conf if _not_ building for openSUSE. (bsc#1063704).
* Thu Sep 28 2017
  - refresh patches to apply cleanly again
    - chrony-config.patch
    - chrony-fix-open.patch
* Wed Sep 20 2017
  - Upgraded to version 3.2:
    * Improve stability with NTP sources and reference clocks
    * Improve stability with hardware timestamping
    * Improve support for NTP interleaved modes
    * Control frequency of system clock on macOS 10.13 and later
    * Set TAI-UTC offset of system clock with leapsectz directive
    * Minimise data in client requests to improve privacy
    * Allow transmit-only hardware timestamping
    * Add support for new timestamping options introduced in Linux 4.13
    * Add root delay, root dispersion and maximum error to tracking log
    * Add mindelay and asymmetry options to server/peer/pool directive
    * Add extpps option to PHC refclock to timestamp external PPS signal
    * Add pps option to refclock directive to treat any refclock as PPS
    * Add width option to refclock directive to filter wrong pulse edges
    * Add rxfilter option to hwtimestamp directive
    * Add -x option to disable control of system clock
    * Add -l option to log to specified file instead of syslog
    * Allow multiple command-line options to be specified together
    * Allow starting without root privileges with -Q option
    * Update seccomp filter for new glibc versions
    * Dump history on exit by default with dumpdir directive
    * Use hardening compiler options by default
    Bug fixes
    * Don't drop PHC samples with low-resolution system clock
    * Ignore outliers in PHC tracking, RTC tracking, manual input
    * Increase polling interval when peer is not responding
    * Exit with error message when include directive fails
    * Don't allow slash after hostname in allow/deny directive/command
    * Try to connect to all addresses in chronyc before giving up
  - Upgraded clknetsim to version 71dbbc5.
  - Reworked chrony-fix-open.patch to fit the new version
* Tue Jan 31 2017
  - Upgraded to version 3.1:
    - Enhancements
    - Add support for precise cross timestamping of PHC on Linux
    - Add minpoll, precision, nocrossts options to hwtimestamp directive
    - Add rawmeasurements option to log directive and modify measurements
      option to log only valid measurements from synchronised sources
    - Allow sub-second polling interval with NTP sources
    - Bug fixes
    - Fix time smoothing in interleaved mode
  - Upgraded clknetsim to version ce89a1b.
  - Reworked the following patches to fit the new versions
    - chrony-config.patch
    - chrony-service-helper.patch
    - chrony-fix-open.patch
* Mon Jan 16 2017
  - Upgraded to version 3.0:
    - Enhancements
    - Add support for software and hardware timestamping on Linux
    - Add support for client/server and symmetric interleaved modes
    - Add support for MS-SNTP authentication in Samba
    - Add support for truncated MACs in NTPv4 packets
    - Estimate and correct for asymmetric network jitter
    - Increase default minsamples and polltarget to improve stability with very low jitter
    - Add maxjitter directive to limit source selection by jitter
    - Add offset option to server/pool/peer directive
    - Add maxlockage option to refclock directive
    - Add -t option to chronyd to exit after specified time
    - Add partial protection against replay attacks on symmetric mode
    - Don't reset polling interval when switching sources to online state
    - Allow rate limiting with very short intervals
    - Improve maximum server throughput on Linux and NetBSD
    - Remove dump files after start
    - Add tab-completion to chronyc with libedit/readline
    - Add ntpdata command to print details about NTP measurements
    - Allow all source options to be set in add server/peer command
    - Indicate truncated addresses/hostnames in chronyc output
    - Print reference IDs as hexadecimal numbers to avoid confusion with IPv4 addresses
    - Bug fixes
    - Fix crash with disabled asynchronous name resolving
  - Upgraded clknetsim to version 6bb6519.
* Tue Nov 29 2016
  - Upgraded to version 2.4.1:
    - Bug fixes
    - Fix processing of kernel timestamps on non-Linux systems
    - Fix crash with smoothtime directive
    - Fix validation of refclock sample times
    - Fix parsing of refclock directive
* Wed Jun 08 2016
  - update to 2.4:
    - Enhancements
    - Add orphan option to local directive for orphan mode
      compatible with ntpd
    - Add distance option to local directive to set activation
      threshold (1 second by default)
    - Add maxdrift directive to set maximum allowed drift of system
    - Try to replace NTP sources exceeding maximum distance
    - Randomise source replacement to avoid getting stuck with bad
    - Randomise selection of sources from pools on start
    - Ignore reference timestamp as ntpd doesn't always set it
    - Modify tracking report to use same values as seen by NTP
    - Add -c option to chronyc to write reports in CSV format
    - Provide detailed manual pages
    - Bug fixes
    - Fix SOCK refclock to work correctly when not specified as
      last refclock
    - Fix initstepslew and -q/-Q options to accept time from own
      NTP clients
    - Fix authentication with keys using 512-bit hash functions
    - Fix crash on exit when multiple signals are received
    - Fix conversion of very small floating-point numbers in
      command packets
    - Removed features
    - Drop documentation in Texinfo format
  - update clknetsim to a5949fe for fixing a testsuite failure:
    - add IP_PKTINFO socket option
    - accept environment variables in make
    - fix building with FORTIFY_SOURCE
    - fix compiler warning
    - support multiple SHM refclocks
    - fix recv functions with new glibc headers
  - refreshed chrony-fix-open.patch: to apply cleanly after clknetsim
  - drop patches:
    - chrony-include-termios.patch
    - make-105-ntpauth-more-reliable.patch
  - drop buildrequires for texinfo and pre requires on the install
    info packages
  - no longer use make install-docs: it only installed 0 byte html
* Wed Apr 13 2016
  - Provide ntp-daemon (bsc#973981)
* Mon Apr 11 2016
  - chrony-fix-open.patch: make sure _open and _close are initialized
    in open()/close() override, as libfreebl3 also calls from the
    the ELF constructor. FATE#319508
  - enable mozilla-nss
* Fri Apr 08 2016
  - Use correct license
  - Drop hardcoded dependency on libseccomp, it is detected during
* Fri Apr 08 2016
  - Undo reference to chrony-dnssrv@.service in %pre, %preun, %post,
    and %postun as it would lead to error.
  - Change conditions for libseccom, we can use any version on SLE-12
* Tue Apr 05 2016
  - Removed %if for distributions that aren't building chrony.
  - Renamed chrony-2.2_logrotate.patch to chrony-logrotate.patch since
    the patch is not particularly version-dependent.
  - Added clknetsim for "make check" processing.
  - Added Buildrequires for gcc-c++ and timezone for building clknetsim
    and running "make check".
  - Changed Buildrequires and Requires to specify the minimum level of
    libseccomp needed to build on s390x and ppc64le.
  - Removed "-Recommends: timedatex" since I couldn't find any instance
    of it anywhere in the build service.
  - Modified the description to use some of the information from the
    chrony web site.
  - Added chrony-include-termios.patch so that it will build on ppc64le.
  - Added make-105-ntpauth-more-reliable.patch so that "make check"
    will not report a non-failure as a failure.
  - Added --without-nss to ./configure to avoid "interruption code
    0x2003B in chronyd" errors.
  - Changed the symbolic links for rcchronyd and rcchronyd-wait to
    point to the actual location of the service command, not the symlink
    in /sbin.
  - Added reference to chrony-dnssrv@.service in %pre, %preun, %post,
    and %postun.
* Mon Mar 28 2016
  - Cleanup spec file with spec-cleaner
  - Prepare for submission to Factory (see fate#319508)
* Thu Feb 18 2016
  - update to 2.3
    - Enhancements
    - Add support for NTP and command response rate limiting
    - Add support for dropping root privileges on Mac OS X,
      FreeBSD, Solaris
    - Add require and trust options for source selection
    - Enable logchange by default (1 second threshold)
    - Set RTC on Mac OS X with rtcsync directive
    - Allow binding to NTP port after dropping root privileges on
    - Drop CAP_NET_BIND_SERVICE capability on Linux when NTP port
      is disabled
    - Resolve names in separate process when seccomp filter is
    - Replace old records in client log when memory limit is
    - Don't reveal local time and synchronisation state in client
    - Don't keep client sockets open for longer than necessary
    - Ignore poll in KoD RATE packets as ntpd doesn't always set it
    - Warn when using keys shorter than 80 bits
    - Add keygen command to generate random keys easily
    - Add serverstats command to report NTP and command packet
    - Bug fixes
    - Fix clock correction after making step on Mac OS X
    - Fix building on Solaris
  - refreshed patches to apply cleanly again:
* Fri Jan 29 2016
  - update to 2.2.1
    Restrict authentication of NTP server/peer to specified key
* Thu Nov 26 2015
  - silence groupadd/useradd call and drop the shell from the user.
* Thu Nov 26 2015
  - update to 2.2
    see /usr/share/doc/packages/chrony/NEWS
  - sync with fedora spec and add systemd support
  - refreshed chrony-config.patch to apply cleanly again
  - added chrony-2.2_logrotate.patch: add missing su option as we no
    longer have the daemon run as root.
  - added chrony-service-helper.patch: imported from fedora with a
    changed path for moving from libexecdir to datadir
  - only use syscall filters on 12.3 and newer
  - move helper from libexecdir to datadir



Generated by rpm2html 1.8.1

Fabrice Bellet, Sun Nov 28 23:55:02 2021