Index index by Group index by Distribution index by Vendor index by creation date index by Name Mirrors Help Search

opal-prd-5.10.7-lp150.2.10.1 RPM for ppc64le

From OpenSuSE Ports Leap 15.0 updates for ppc64le

Name: opal-prd Distribution: openSUSE Leap 15.0
Version: 5.10.7 Vendor: openSUSE
Release: lp150.2.10.1 Build date: Mon Aug 26 07:58:38 2019
Group: System/Management Build host: obs-power8-02
Size: 153085 Source RPM: skiboot-5.10.7-lp150.2.10.1.src.rpm
Summary: OPAL Processor Recovery Diagnostics daemon
This package provides a daemon to load and run the OpenPower firmware's
Processor Recovery Diagnostics binary. This is responsible for runtime
maintenance of Power hardware.






* Tue Jul 23 2019 Michal Suchanek <>
  - Update to 5.10.7
    - NPU2 HMIs: dump out a *LOT* of npu2 registers for debugging
    - libflash/blocklevel: Correct miscalculation in blocklevel_smart_erase()
    - Tie tm-suspend fw-feature and opal_reinit_cpus() together
    - NPU2: dump NPU2 registers on npu2 HMI
    - npu2: Add performance tuning SCOM inits
    - hw/npu2: Assign a unique LPARSHORTID per GPU
    - occ: Set up OCC messaging even if we fail to setup pstates
    - core/fast-reboot: disable fast reboot upon fundamental entry/exit/locking errors
    - core/opal: allow some re-entrant calls
    - core/opal: abort in case of re-entrant OPAL call
    - npu2: Disable fast reboot
    - xive: disable store EOI support
    - npu2/hw-procedures: fence bricks on GPU reset
    - hdata/spira: parse vpd to add part-number and serial-number to xscom@ node
    - hw/imc: Check for pause_microcode_at_boot() return status
    - core/cpufeatures: Fix setting DARN and SCV HWCAP feature bits
    - opal-prd: Do not error out on first failure for soft/hard offline.
    - xive: fix missing unlock in error path
    - OPAL_PCI_SET_POWER_STATE: fix locking in error paths
    - libffs: Fix string truncation gcc warning.
    - hdata/i2c.c: fix building with gcc8
    - opal-prd: Fix opal-prd crash
    - remove upstreamed patches:
    - opal-prd-Fix-opal-prd-crash.patch
    - hdata-i2c.c-fix-building-with-gcc8.patch
    - libffs-fix-string-truncation.patch
    - add errorlog-Prevent-alignment-error-buiding-with-gcc9.patch
    - add hdata-vpd-fix-printing-char-0x00.patch
* Mon Feb 11 2019 Michal Suchanek <>
  - Fix opal-prd crash when building with -pie (bsc#1124931).
    - add opal-prd-Fix-opal-prd-crash.patch
* Wed Jan 30 2019 Michal Suchanek <>
  - skiboot.lid conflicts with qemu which is not allowed in backports so build
    opal-firmware on OpenSUSE only (bsc#1123072).
* Thu Jan 24 2019 Michal Suchanek <>
  - Fix build on Tumbleweed.
    - add hdata-i2c.c-fix-building-with-gcc8.patch
    - add libffs-fix-string-truncation.patch
* Mon Apr 23 2018
  - Add few lines below about changes version 5.10
* Wed Apr 18 2018
  - version update to 5.10
    - skiboot v5.10 contains all bug fixes as of skiboot-5.9.8 and
      skiboot-5.4.9. We do not forsee any further 5.9.x releases.
    - Power9 support
      Power saving -Secure and Trusted Boot
    - for details refer to:
  - remove increase_dpath_string.patch
* Sun Dec 17 2017
  - version update to 5.9.6
    - see
  - add increase_dpath_string.patch
* Wed Apr 12 2017
  - version update to 5.5.0
    - see
  - remove two patches now upstream:
* Fri Jun 17 2016
  - new skiboot_gcc6_backtrace.patch
* Tue Mar 29 2016
  - Reenable parallel build
    0001-Make-links-target-reusable.patch (bsc#987201).
* Thu Mar 24 2016
  - Drop opal-prd.{service,socket}, use upstream one
  - Disable parallel builds
    (see, bsc#987201)
* Tue Mar 22 2016
  - version update to 5.2.0 (FATE#320438)
    - see
* Sat Jan 30 2016
  - Update to 5.1.13
    * See
* Sat Jan 02 2016
  - Update to 5.1.12
    * opal-prd:
      + Display an explict and obvious message if running on a
      system that does not support opal-prd, such as an IBM FSP
      based POWER system, where the FSP takes on the role of
    * pflash:
      + Fix a missing (C) header
      + cherry-picked from master.
    * General:
      + Don't link with libgcc
      + On some toolchains, we don't have libgcc available.
    * POWER8 PHB (PCIe) specific:
      + hw/phb3: Flush cache line after updating P/Q bits
      + When doing an MSI EOI, we update the P and Q bits in the
    * IBM FSP based machines:
      + FSP: Give up PSI link on shutdown This clears up some
      erroneous SRCs (error logs) in some situations.
      + Correctly report back Real Time Clock errors to host.
* Tue Oct 27 2015
  - Version update to 5.1.8
    skiboot-5.1.8 is the 9th stable release of 5.1, it follows skiboot-5.1.7
    (which was released October 13th, 2015).
    Skiboot 5.1.8 contains all fixes from skiboot-5.1.7 and is a minor bug
    fix release, with a single fix for recovery from a (rare) error.
    Over skiboot-5.1.7, we have the following change:
  - opal/hmi: Fix a soft lockup issue on Hypervisor Maintenance Interrupt
    for certain timebase errors.
    We also introduce a timeout to handle the worst situation where all other
    threads are badly stuck without setting a cleanup done bit. Under such
    situation timeout will help to avoid soft lockups and report failure to
  - Fix opal-prd.service file to include arguments
* Tue Oct 20 2015
  - Add ppc64 architecture, drop i2c-tools.
    i2c-dev.h is now shipped in linux-glibc-devel package
* Mon Oct 12 2015
  - Initial version 5.1.6



Generated by rpm2html 1.8.1

Fabrice Bellet, Sun Jan 9 11:50:40 2022