Index index by Group index by Distribution index by Vendor index by creation date index by Name Mirrors Help Search

libreadline8-8.1-3.1 RPM for riscv64

From OpenSuSE Ports Tumbleweed for riscv64

Name: libreadline8 Distribution: openSUSE Tumbleweed
Version: 8.1 Vendor: openSUSE
Release: 3.1 Build date: Tue Jan 25 17:37:52 2022
Group: System/Libraries Build host: lamb17
Size: 349222 Source RPM: readline-8.1-3.1.src.rpm
Summary: The Readline Library
The readline library is used by the Bourne Again Shell (bash, the
standard command interpreter) for easy editing of command lines.  This
includes history and search functionality.






* Fri Jan 14 2022 Dr. Werner Fink <>
  - Add official patch readline81-002 and its signature
    * There are some characters (e.g., cyrillic) that can't be displayed using
      certain single-byte encodings (e.g., cp1251) because the negative signed
      int is interpreted as EOF and not displayed.
* Wed May 05 2021 Dr. Werner Fink <>
  - Add official patch readline81-001 and its signature
    * The code to check readline versions in an inputrc file had the sense of the
      comparisons reversed.
* Mon Jan 11 2021 Dr. Werner Fink <>
  - Update to final readline-8.1
    which is mainly rc3
  - Remove obsolate patches and the signatures
    * readline80-001
    * readline80-001.sig
    * readline80-002
    * readline80-002.sig
    * readline80-003
    * readline80-003.sig
    * readline80-004
    * readline80-004.sig
  - Port patches
    * readline-5.2-conf.patch
    * readline-6.2-metamode.patch
    * readline-6.3-destdir.patch
    * readline-6.3-input.dif
    * readline-6.3-rltrace.patch
    * readline-7.0-screen.patch
  - Port and rename patch readline-8.0.dif which is now readline-8.1.dif
* Mon Nov 23 2020 Dr. Werner Fink <>
  - Update to readline-8.1-rc3 for testing
    * Fixed a bug that could cause point to be set beyond the end of the line
      buffer when aborting an incremental search.
* Tue Nov 10 2020 Dr. Werner Fink <>
  - Update to readline-8.1-rc2 for testing
    * Bracketed paste mode is enabled by default. There is a configure-time
      option (--enable-bracketed-paste-default) to set the default to on or off.
    * Terminals that are named "dumb" or unknown do not enable bracketed paste
      by default.
    * Ensure that disabling bracketed paste turns off highlighting the incremental
      search string when the search is successful.
  - Remove patch readline-8.1-bracketed_paste_off.patch and use the
    new build time configuration
* Wed Oct 28 2020 Ludwig Nussel <>
  - get rid of /lib hack and install readline in /usr. Bash is already there
    anyways (boo#1029961)
  - remove deprecated %install_info
* Fri Oct 16 2020 Dr. Werner Fink <>
  - Add patch readline-8.1-bracketed_paste_off.patch
    simply to disable the new bracketed paste feature
* Mon Oct 12 2020 Dr. Werner Fink <>
  - Update to readline-8.1-rc1 for testing
    * If a second consecutive completion attempt produces matches where the first
      did not, treat it as a new completion attempt and insert a match as
    * Bracketed paste mode works in more places: incremental search strings, vi
      overstrike mode, character search, and reading numeric arguments.
    * Readline automatically switches to horizontal scrolling if the terminal has
      only one line.
    * Unbinding all key sequences bound to a particular readline function now
      descends into keymaps for multi-key sequences.
    * rl-clear-display: new bindable command that clears the screen and, if
      possible, the scrollback buffer (bound to emacs mode M-C-l by default).
    * New active mark and face feature: when enabled, it will highlight the text
      inserted by a bracketed paste (the `active region') and the text found by
      incremental and non-incremental history searches. This is tied to bracketed
      paste and can be disabled by turning off bracketed paste.
    * Readline sets the mark in several additional commands.
    * Bracketed paste mode is enabled by default (for now).
    * Readline tries to take advantage of the more regular structure of UTF-8
      characters to identify the beginning and end of characters when moving
      through the line buffer.
    * The bindable operate-and-get-next command (and its default bindings) are
      now part of readline instead of a bash-specific addition.
    * The signal cleanup code now blocks SIGINT while processing after a SIGINT.
  - Remove old upstream patches
    * readline80-001
    * readline80-002
    * readline80-003
    * readline80-004
  - Port and rename patch readline-8.0.dif which is now readline-8.1.dif
  - Port patches
    * readline-5.2-conf.patch
    * readline-6.2-metamode.patch
    * readline-6.3-destdir.patch
    * readline-6.3-input.dif
    * readline-6.3-rltrace.patch
    * readline-7.0-screen.patch
* Thu Jul 16 2020 Andreas Stieger <>
  - add upstream keyring and verify source signature
  - change custom handling of official upstream patches to standard,
    and verify signatures on official patches
* Thu Feb 13 2020 Dr. Werner Fink <>
  - Add official patch readline80-002
    When using previous-history to go back beyond the beginning of the history list,
    it's possible to move to an incorrect partial line.
  - Add official patch readline80-003
    Reading history entries with timestamps can result in history entries joined
    by linefeeds.
  - Add official patch readline80-004
    If writing the history file fails, and renaming the backup history file fails,
    it's possible for readline's history code to return the wrong error to its
* Wed Sep 04 2019 Ludwig Nussel <>
  - Avoid pulling in readline-doc into every installation. Instead of
    recommeding it, supplement the documentation pattern.
* Fri Aug 16 2019 Dr. Werner Fink <>
  - Rework patch readline-7.0-screen.patch again for bug boo#1143055
    * Map all "screen(-xxx)?.yyy(-zzz)?" to "screen" as well as
      map "konsole(-xxx)?" and "gnome(-xxx)?" to "xterm"
* Thu Aug 15 2019 Dr. Werner Fink <>
  - Add official patch readline80-001
    The history file reading code doesn't close the file descriptor open to
    the history file when it encounters a zero-length file.
* Fri Aug 02 2019 Martin Liška <>
  - Use FAT LTO objects in order to provide proper static library.
* Wed Jan 09 2019 Dr. Werner Fink <>
  - Update to readline-8.0 final
* Fri Dec 21 2018 Dr. Werner Fink <>
  - Update to readline-8.0-rc1 for testing
* Thu Nov 29 2018 Dr. Werner Fink <>
  - Update to readline-8.0-beta2 for testing
    j. Readline now allows application-defined keymap names; there is a new public
      function, rl_set_keymap_name(), to do that.
    k. The "Insert" keypad key, if available, now puts readline into overwrite
  - Port and modify patches
    * readline-6.2-metamode.patch
    * readline-6.3-input.dif
    * readline-7.0-screen.patch
    * readline-8.0.dif
* Fri Sep 28 2018 Dr. Werner Fink <>
  - Rework patch readline-7.0-screen.patch
* Thu Sep 20 2018 Dr. Werner Fink <>
  - Update to readline-8.0-beta for testing
    a. Non-incremental vi-mode search (`N', `n') can search for a shell pattern, as
      Posix specifies (uses fnmatch(3) if available).
    b. There are new `next-screen-line' and `previous-screen-line' bindable
      commands, which move the cursor to the same column in the next, or previous,
      physical line, respectively.
    c. There are default key bindings for control-arrow-key key combinations.
    d. A negative argument (-N) to `quoted-insert' means to insert the next N
      characters using quoted-insert.
    e. New public function: rl_check_signals(), which allows applications to
      respond to signals that readline catches while waiting for input using
      a custom read function.
    f. There is new support for conditionally testing the readline version in an
      inputrc file, with a full set of arithmetic comparison operators available.
    g. There is a simple variable comparison facility available for use within an
      inputrc file. Allowable operators are equality and inequality; string
      variables may be compared to a value; boolean variables must be compared to
      either `on' or `off'; variable names are separated from the operator by
    h. The history expansion library now understands command and process
      substitution and extended globbing and allows them to appear anywhere in a
    i. The history library has a new variable that allows applications to set the
      initial quoting state, so quoting state can be inherited from a previous
  - Remove not used patch readline-6.2-endpw.dif
  - Port and modify patches
    * readline-5.2-conf.patch
    * readline-6.2-metamode.patch
    * readline-6.2-xmalloc.dif
    * readline-6.3-destdir.patch
    * readline-6.3-input.dif
    * readline-6.3-rltrace.patch
    * readline-7.0-screen.patch
  - Port and rename patch readline-7.0.dif which is now readline-8.0.dif
  - Modify baselibs.conf
* Wed Jun 13 2018
  - Add patch readline-7.0-screen.patch to be able to parse settings
    in inputrc for all screen TERM variables starting with "screen."
    to fix boo#1095661
* Sun Mar 18 2018
  - Update descriptions. Replace old $RPM_* vars with macros.
* Fri Mar 16 2018
  - Apply the upstream patches as well!!!
* Fri Mar 16 2018
  - Avoid self Provides/Obsoletes
* Fri Mar 16 2018
  - Rename basic package to readline to have the latest readline
    version always within package readline again.
* Fri Mar 16 2018
  - Correct documentation path
* Wed Mar 14 2018
  - The obsoletes must be <=, as version stayed at 7.0
* Mon Mar 12 2018
  - Create separate readline7 package
* Tue Feb 27 2018
  - Create readline-devel-static package to re-enable static libraries
    again (boo#1082913)
* Thu Feb 22 2018
  - Use %license (boo#1082318)
* Tue Feb 06 2018
  - Add patch 19 to bash-4.4-patches.tar.bz2
    * With certain values for PS1, especially those that wrap onto
      three or more lines, readline will miscalculate the number of
      invisible characters, leading to crashes and core dumps.
* Tue Jan 30 2018
  - Add patches 13-18 to bash-4.4-patches.tar.bz2
    * 13: If a here-document contains a command substitution, the
      command substitution can get access to the file descriptor used
      to write the here-document.
    * 14: Under some circumstances, functions that return via the
      `return' builtin do not clean up memory they allocated to keep
      track of FIFOs.
    * 15: Process substitution can leak internal quoting to the
      parser in the invoked subshell.
    * 16: Bash can perform trap processing while reading command
      substitution output instead of waiting until the command
    * 17: There is a memory leak when `read -e' is used to read a
      line using readline.
    * 18: Under certain circumstances (e.g., reading from /dev/zero),
      read(2) will not return -1 even when interrupted by a signal.
      The read builtin needs to check for signals in this case.
  - partial cleanup with spec-cleaner
* Wed Jan 24 2018
  - Modify patch bash-4.3-pathtemp.patch to avoid crash at full
    file system (boo#1076909)
* Fri Dec 08 2017
  - Enable multibyte characters by default
* Mon Sep 25 2017
  - Modify patch bash-4.4.dif to let bashline.h install as well as
    this header file is included by general.h due to the same patch
* Thu May 25 2017
  - Make build reproducible in spite of profile based optimizations (boo#1040589)
* Wed May 24 2017
  - Allow to disable do_profiling in builds (related to boo#1040589)
* Wed Apr 26 2017
  - Simplify patch readline-5.2-conf.patch
* Tue Apr 25 2017
  - Do not throw info and manual pages away
* Fri Feb 17 2017
  - Remove bash-4.0-async-bnc523667.dif as this one is fixed (and
    was disabled and nobody had reported trouble)
* Mon Jan 30 2017
  - Add upstream patch readline70-002 which replace old one
    There is a race condition in add_history() that can be triggered by a fatal
    signal arriving between the time the history length is updated and the time
    the history list update is completed. A later attempt to reference an
    invalid history entry can cause a crash.
  - Add upstream patch readline70-003
    Readline-7.0 uses pselect(2) to allow readline to handle signals that do not
    interrupt read(2), such as SIGALRM, before reading another character.  The
    signal mask used in the pselect call did not take into account signals the
    calling application blocked before calling readline().
* Fri Jan 27 2017
  - Add upstream patch bash44-006
    Out-of-range negative offsets to popd can cause the shell to crash
    attempting to free an invalid memory block.
  - Remove patch popd-offset-overflow.patch to use bash44-006
  - Add upstream patch bash44-007
    When performing filename completion, bash dequotes the directory
    name being completed, which can result in match failures and
    potential unwanted expansion.
  - Duplicate bash44-007 as readline70-002 as it seems to be missed
  - Add upstream patch bash44-008
    Under certain circumstances, bash will evaluate arithmetic
    expressions as part of reading an expression token even when
    evaluation is suppressed. This happens while evaluating a
    conditional expression and skipping over the failed branch of the
  - Add upstream patch bash44-009
    There is a race condition in add_history() that can be triggered
    by a fatal signal arriving between the time the history length
    is updated and the time the history list update is completed.
    A later attempt to reference an invalid history entry can cause
    a crash.
  - Add upstream patch bash44-010
    Depending on compiler optimizations and behavior, the `read'
    builtin may not save partial input when a timeout occurs.
  - Add upstream patch bash44-011
    Subshells begun to run command and process substitutions may
    attempt to set the terminal's process group to an incorrect
    value if they receive a fatal signal.  This depends on the
    behavior of the process that starts the shell.
  - Add upstream patch bash44-012
    When -N is used, the input is not supposed to be split using
    $IFS, but leading and trailing IFS whitespace was still removed.
* Thu Jan 19 2017
  - Remove -L option on screen call dues API change, now we depend
    on environment variables only.
* Fri Dec 09 2016
  - Enable -fprofile-correction to cover misleading profile created due
    to terminating_signal which does not return.
* Mon Nov 28 2016
  -  Add upstream patch popd-offset-overflow.patch to fix boo#1010845
    CVE-2016-9401: bash: popd controlled free (Segmentation fault)
    Remark: this is a simple Segmentation fault, no security risk
* Thu Nov 17 2016
  - Add upstream patch bash44-001
    Bash-4.4 changed the way the history list is initially allocated to reduce
    the number of reallocations and copies.  Users who set HISTSIZE to a very
    large number to essentially unlimit the size of the history list will get
    memory allocation errors
  - Add upstream patch bash44-002
    Bash-4.4 warns when discarding NUL bytes in command substitution output
    instead of silently dropping them.  This patch changes the warnings from
    one per NUL byte encountered to one warning per command substitution.
  - Drop no-null-warning.patch as bash44-002 is official replacement
  - Add upstream patch bash44-003
    Specially-crafted input, in this case an incomplete pathname expansion
    bracket expression containing an invalid collating symbol, can cause the
    shell to crash.
  - Add upstream patch bash44-004
    There is a race condition that can result in bash referencing freed memory
    when freeing data associated with the last process substitution.
  - Add upstream patch bash44-005
    Under certain circumstances, a simple command is optimized to eliminate a
    fork, resulting in an EXIT trap not being executed. (boo#1008459)
  - Add upstream patch readline70-001
    Readline-7.0 changed the way the history list is initially allocated to reduce
    the number of reallocations and copies.  Users who set the readline
    history-size variable to a very large number to essentially unlimit the size
    of the history list will get memory allocation errors
* Mon Oct 24 2016
  - no-null-warning.patch: Don't warn about null bytes in command
* Tue Oct 04 2016
  - Avoid confusing library path
* Fri Sep 16 2016
  - Update bash 4.4 final
    * Latest bug fixes since 4.4 rc2
  - Update readline 7.0 final
    * Latest bug fixes since 7.0 rc2
    * New application-callable function: rl_pending_signal(): returns the signal
      number of any signal readline has caught but not yet handled.
    * New application-settable variable: rl_persistent_signal_handlers: if set
    to a non-zero value, readline will enable the readline-6.2 signal handler
    behavior in callback mode: handlers are installed when
    rl_callback_handler_install is called and removed removed when a complete
    line has been read.
  - Drop patch bash-4.3-async-bnc971410.dif as this one is part of 4.4
  - Drop patch bash-3.2-longjmp.dif as now long time be fixed
  - Drop patch bash-4.3-headers.dif as loadables now simply work
  - Drop readline-6.1-wrap.patch as this seems to be fixed
  - Disable patch bash-4.0-async-bnc523667.dif for now as it seems to be fixed
    in an other way
* Wed Sep 14 2016
  - Update bash 4.4 rc2  -- Bugfixes
  - Update readline 7.0 rc2 -- Bugfixes
* Mon Aug 01 2016
  - Make clear that the files /etc/profile as well as /etc/bash.bashrc
    may source other files as well even if the bash does not.
    Therefore modify patch bash-4.1-bash.bashrc.dif (bsc#959755)
* Thu Jul 14 2016
  - Update bash 4.4 beta 2
    * Value conversions (arithmetic expansions, case modification, etc.) now
      happen when assigning elements of an array using compound assignment.
    * There is a new option settable in config-top.h that makes multiple
      directory arguments to `cd' a fatal error.
    * Bash now uses mktemp() when creating internal temporary files; it produces
      a warning at build time on many Linux systems.
  - Update to readline library 7.0 beta 2 (not enabled as not standalone)
    * The default binding for ^W in vi mode now uses word boundaries specified
      by Posix (vi-unix-word-rubout is bindable command name).
    * rl_clear_visible_line: new application-callable function; clears all
      screen lines occupied by the current visible readline line.
    * rl_tty_set_echoing: application-callable function that controls whether
      or not readline thinks it is echoing terminal output.
    * Handle >| and strings of digits preceding and following redirection
      specifications as single tokens when tokenizing the line for history
    * Fixed a bug with displaying completions when the prefix display length
      is greater than the length of the completions to be displayed.
    * The :p history modifier now applies to the entire line, so any expansion
      specifying :p causes the line to be printed instead of expanded.
* Tue Mar 08 2016
  - Update bash 4.4 release candidate 1
    * There is now a settable configuration #define that will cause the shell
      to exit if the shell is running setuid without the -p option and setuid
      to the real uid fails.
    * Command and process substitutions now turn off the `-v' option when
      executing, as other shells seem to do.
    * The default value for the `checkhash' shell option may now be set at
      compile time with a #define.
    * The `mapfile' builtin now has a -d option to use an arbitrary character
      as the record delimiter, and a -t option  to strip the delimiter as
      supplied with -d.
    * The maximum number of nested recursive calls to `eval' is now settable in
      config-top.h; the default is no limit.
    * The `-p' option to declare and similar builtins will display attributes for
      named variables even when those variables have not been assigned values
      (which are technically unset).
    * The maximum number of nested recursive calls to `source' is now settable
      in config-top.h; the default is no limit.
    * All builtin commands recognize the `--help' option and print a usage
    * Bash does not allow function names containing `/' and `=' to be exported.
    * The `ulimit' builtin has new -k (kqueues) and -P (pseudoterminals) options.
    * The shell now allows `time ; othercommand' to time null commands.
    * There is a new `--enable-function-import' configuration option to allow
      importing shell functions from the environment; import is enabled by
    * `printf -v var ""' will now set `var' to the empty string, as if `var=""'
      had been executed.
    * GLOBIGNORE, the pattern substitution word expansion, and programmable
      completion match filtering now honor the value of the `nocasematch' option.
    * There is a new ${parameter@spec} family of operators to transform the
      value of `parameter'.
    * Bash no longer attempts to perform compound assignment if a variable on the
      rhs of an assignment statement argument to `declare' has the form of a
      compound assignment (e.g., w='(word)' ; declare foo=$w); compound
      assignments are accepted if the variable was already declared as an array,
      but with a warning.
    * The declare builtin no longer displays array variables using the compound
      assignment syntax with quotes; that will generate warnings when re-used as
      input, and isn't necessary.
    * Executing the rhs of && and || will no longer cause the shell to fork if
      it's not necessary.
    * The `local' builtin takes a new argument: `-', which will cause it to save
      and the single-letter shell options and restore their previous values at
      function return.
    * `complete' and `compgen' have a new `-o nosort' option, which forces
      readline to not sort the completion matches.
    * Bash now allows waiting for the most recent process substitution, since it
      appears as $!.
    * The `unset' builtin now unsets a scalar variable if it is subscripted with
      a `0', analogous to the ${var[0]} expansion.
    * `set -i' is no longer valid, as in other shells.
    * BASH_SUBSHELL is now updated for process substitution and group commands
      in pipelines, and is available with the same value when running any exit
    * Bash now checks $INSIDE_EMACS as well as $EMACS when deciding whether or
      not bash is being run in a GNU Emacs shell window.
    * Bash now treats SIGINT received when running a non-builtin command in a
      loop the way it has traditionally treated running a builtin command:
      running any trap handler and breaking out of the loop.
    * New variable: EXECIGNORE; a colon-separate list of patterns that will
      cause matching filenames to be ignored when searching for commands.
    * Aliases whose value ends in a shell metacharacter now expand in a way to
      allow them to be `pasted' to the next token, which can potentially change
      the meaning of a command (e.g., turning `&' into `&&').
    * `make install' now installs the example loadable builtins and a set of
      bash headers to use when developing new loadable builtins.
    * `enable -f' now attempts to call functions named BUILTIN_builtin_load when
      loading BUILTIN, and BUILTIN_builtin_unload when deleting it.  This allows
      loadable builtins to run initialization and cleanup code.
    * There is a new BASH_LOADABLES_PATH variable containing a list of directories
      where the `enable -f' command looks for shared objects containing loadable
    * The `complete_fullquote' option to `shopt' changes filename completion to
      quote all shell metacharacters in filenames and directory names.
    * The `kill' builtin now has a `-L' option, equivalent to `-l', for
      compatibility with Linux standalone versions of kill.
    * BASH_COMPAT and FUNCNEST can be inherited and set from the shell's initial
    * inherit_errexit: a new `shopt' option that, when set, causes command
      substitutions to inherit the -e option.  By default, those subshells disable
    - e.  It's enabled as part of turning on posix mode.
    * New prompt string: PS0.  Expanded and displayed by interactive shells after
      reading a complete command but before executing it.
    * Interactive shells now behave as if SIGTSTP/SIGTTIN/SIGTTOU are set to SIG_DFL
      when the shell is started, so they are set to SIG_DFL in child processes.
    * Posix-mode shells now allow double quotes to quote the history expansion
    * OLDPWD can be inherited from the environment if it names a directory.
    * Shells running as root no longer inherit PS4 from the environment, closing a
      security hole involving PS4 expansion performing command substitution.
    * If executing an implicit `cd' when the `autocd' option is set, bash will now
      invoke a function named `cd' if one exists before executing the `cd' builtin.
  - Update to readline library 7.0 release candidate 1
    * The history truncation code now uses the same error recovery mechansim as
      the history writing code, and restores the old version of the history file
      on error.  The error recovery mechanism handles symlinked history files.
    * There is a new bindable variable, `enable-bracketed-paste', which enables
      support for a terminal's bracketed paste mode.
    * The editing mode indicators can now be strings and are user-settable
      (new `emacs-mode-string', `vi-cmd-mode-string' and `vi-ins-mode-string'
      variables).  Mode strings can contain invisible character sequences.
      Setting mode strings to null strings restores the defaults.
    * Prompt expansion adds the mode string to the last line of a multi-line
      prompt (one with embedded newlines).
    * There is a new bindable variable, `colored-completion-prefix', which, if
      set, causes the common prefix of a set of possible completions to be
      displayed in color.
    * There is a new bindable command `vi-yank-pop', a vi-mode version of emacs-
      mode yank-pop.
    * The redisplay code underwent several efficiency improvements for multibyte
    * The insert-char function attempts to batch-insert all pending typeahead
      that maps to self-insert, as long as it is coming from the terminal.
    * rl_callback_sigcleanup: a new application function that can clean up and
      unset any state set by readline's callback mode.  Intended to be used
      after a signal.
    * If an incremental search string has its last character removed with DEL, the
      resulting empty search string no longer matches the previous line.
    * If readline reads a history file that begins with `#' (or the value of
      the history comment character) and has enabled history timestamps, the history
      entries are assumed to be delimited by timestamps.  This allows multi-line
      history entries.
    * Readline now throws an error if it parses a key binding without a terminating
      `:' or whitespace.
  - Remove patches which are upstream solved
  - Rename patches
    bash-4.3.dif become bash-4.4.dif
    readline-6.3.dif become readline-7.0.dif
  - Refresh other patches as well
* Mon Oct 19 2015
  - Define the USE_MKTEMP and USE_MKSTEMP cpp macros as the
    implementation is already there.
  - Add patch bash-4.3-pathtemp.patch to allow root to clear the
    file systems.  Otherwise the completion does not work if /tmp
    if full (ENOSPC for here documents)
* Fri Oct 16 2015
  - Remove --hash-size options as there is no any change in the final
    binary nor library anymore
* Mon Aug 31 2015
  - Add upstream patch bash43-039
    Using the output of `declare -p' when run in a function can result in variables
    that are invisible to `declare -p'.  This problem occurs when an assignment
    builtin such as `declare' receives a quoted compound array assignment as one of
    its arguments.
  - Add upstream patch bash43-040
    There is a memory leak that occurs when bash expands an array reference on
    the rhs of an assignment statement.
  - Add upstream patch bash43-041
    There are several out-of-bounds read errors that occur when completing command
    lines where assignment statements appear before the command name.  The first
    two appear only when programmable completion is enabled; the last one only
    happens when listing possible completions.
  - Add upstream patch bash43-042
    There is a problem when parsing command substitutions containing `case'
    commands within pipelines that causes the parser to not correctly identify
    the end of the command substitution.
* Wed Jul 01 2015
  - add bash-4.3-perl522.patch to fix texi2html for perl 5.22
    (defined(@array) has been deprecated since at least 2012)
* Thu May 28 2015
  - Add upstream patch bash43-034
    If neither the -f nor -v options is supplied to unset, and a name argument is
    found to be a function and unset, subsequent name arguments are not treated as
    variables before attempting to unset a function by that name.
  - Add upstream patch bash43-035
    A locale with a long name can trigger a buffer overflow and core dump.  This
    applies on systems that do not have locale_charset in libc, are not using
    GNU libiconv, and are not using the libintl that ships with bash in lib/intl.
  - Add upstream patch bash43-036
    When evaluating and setting integer variables, and the assignment fails to
    create a variable (for example, when performing an operation on an array
    variable with an invalid subscript), bash attempts to dereference a null
    pointer, causing a segmentation violation.
  - Add upstream patch bash43-037
    If an associative array uses `@' or `*' as a subscript, `declare -p' produces
    output that cannot be reused as input.
  - Add upstream patch bash43-038
    There are a number of instances where `time' is not recognized as a reserved
    word when the shell grammar says it should be.
* Mon May 18 2015
  - move info deletion to %preun sections
* Wed Mar 04 2015
  - bash-4.3-loadables.dif: One more warning fixed, in
  - bash-4.3-loadables.dif: Reverted one warning fix, which was
    introducing another warning and possibly a bug.
* Wed Mar 04 2015
  - bash-4.3-loadables.dif: Split changes to shell.h to a separate
    patch "bash-4.3-include-unistd.dif", as the loadables build just
    fine without these changes.
  - bash-4.3-loadables.dif: Drop all header file inclusion fixups,
    upstream fixed the problem differently 5 years ago.
* Wed Feb 18 2015
  - Do not restart all signal handlers for bash 4.3 as this breaks
    trap handler in subshells waotiug for a process
* Fri Jan 16 2015
  - Remove -DMUST_UNBLOCK_CHLD(=1) as this breaks waitchild(2) on linux
* Fri Jan 09 2015
  - Add upstream patch bash43-031
    The new nameref assignment functionality introduced in bash-4.3 did not perform
    enough validation on the variable value and would create variables with
    invalid names.
  - Add upstream patch bash43-032
    When bash is running in Posix mode, it allows signals -- including SIGCHLD --
    to interrupt the `wait' builtin, as Posix requires.  However, the interrupt
    causes bash to not run a SIGCHLD trap for all exited children.  This patch
    fixes the issue and restores the documented behavior in Posix mode.
  - Add upstream patch bash43-033
    Bash does not clean up the terminal state in all cases where bash or
    readline  modifies it and bash is subsequently terminated by a fatal signal.
    This happens when the `read' builtin modifies the terminal settings, both
    when readline is active and when it is not.  It occurs most often when a script
    installs a trap that exits on a signal without re-sending the signal to itself.
* Wed Dec 03 2014
  - Fix the sed command that fixes up the patch headers. It was
    printing a duplicate header line, which suprisingly did not
    confuse patch, but could in the future.
  - Fix all patches that had the duplicate header line issue.
* Tue Nov 04 2014
  - Use tail command to follow run-tests instead of a simpe cat command
* Fri Oct 24 2014
  - Really remove obsolete patches
* Fri Oct 24 2014
  - Skip autoconf on OS 10.2 or older
* Wed Oct 22 2014
  - Avoid fdupes on SLES-10
* Wed Oct 22 2014
  - Bump bash version to 4.3
* Tue Oct 21 2014
  - Allow building on targets from SL 10.1 to current since it's free
* Mon Oct 06 2014
  - Add upstream patches
    bash43-030 which fixes CVE-2014-6278
    bash43-029 which fixes CVE-2014-6277
    bash43-028 which fixes CVE-2014-7186/CVE-2014-7187
* Tue Sep 30 2014
  - Add patch bash-4.2-extra-import-func.patch which is based on the
    BSD patch of Christos.  As further enhancements the option
    import-functions is mentioned in the manual page and a shopt
    switch is added to enable and disable import-functions on the fly
  - Rename bash-4.2-extra-import-func.patch to bash-4.3-extra-import-func.patch
* Mon Sep 29 2014
  - Add upstream patches
    bash43-027 which fixed bsc#898604
    bash43-026 which fixes CVE-2014-7169 and bsc#898346
    bash43-025 which replaces bash-4.3-CVE-2014-6271.patch and
    fixes bnc#896776
  - Remove patch bash-4.3-CVE-2014-6271.patch due patch bash43-027
  - Add patch bash-4.2-CVE-2014-7187.patch for bsc#898603, CVE-2014-7186,
    CVE-2014-7187: bad handling of HERE documents and for loop issue
* Fri Sep 26 2014
  - Use a version linker script for libreadline 6.3 as there are new
    symbols in this 6.3 version like the rl_executing_keyseq and those
    are used by the new bash 4.3
* Thu Sep 18 2014
  - Add bash-4.3-CVE-2014-6271.patch
    to fix CVE-2014-6271, the unexpected code execution with
    environment variables (bnc#896776)
* Tue Aug 19 2014
  - Update to bash 4.3 with patch level 24
    * The -t timeout option to `read' does not work when the -e option is used
    * When PS2 contains a command substitution, here-documents entered in an
      interactive shell can sometimes cause a segmentation fault.
    * When the readline `revert-all-at-newline' option is set, pressing newline
      when the current line is one retrieved from history results in a double free
      and a segmentation fault.
    * Using nested pipelines within loops with the `lastpipe' option set can result
      in a segmentation fault.
    * Bash does not correctly parse process substitution constructs that contain
      unbalanced parentheses as part of the contained command.
    * Indirect variable references do not work correctly if the reference
      variable expands to an array reference using a subscript other than 0
* Sun Jun 29 2014
  - Don't use outdated C standard
* Tue May 20 2014
  - Update to bash 4.3 with patch level 18
    * When a SIGCHLD trap runs a command containing a shell builtin while
      a script is running `wait' to wait for all running children to complete,
      the SIGCHLD trap will not be run once for each child that terminates.
    * Using reverse-i-search when horizontal scrolling is enabled doe
      not redisplay the entire line containing the successful search results.
    * Under certain circumstances, $@ is expanded incorrectly in contexts where
      word splitting is not performed.
    * When completing directory names, the directory name is dequoted twice.
      This causes problems for directories with single and double quotes in
      their names.
    * An extended glob pattern containing a slash (`/') causes the globbing code
      to misinterpret it as a directory separator.
    * The code that creates local variables should not clear the `invisible'
      attribute when returning an existing local variable.  Let the code that
      actually assigns a value clear it.
    * When assigning an array variable using the compound assignment syntax,
      but using `declare' with the rhs of the compound assignment quoted, the
      shell did not mark the variable as visible after successfully performing
      the assignment.
  - Update to readline library 6.3 with patch level 6
    * Using reverse-i-search when horizontal scrolling is enabled does
      not redisplay the entire line containing the successful search results.
  - Remove readline-horizontal-redisplay.patch as now upstream
  - Rename readline-6.2.dif to readline-6.3.dif and bash-4.2.dif to bash-4.3.dif
* Wed Apr 30 2014
  - Add readline-horizontal-redisplay.patch from upstream as a temporary
    fix for failing incremental search in horizontal-scroll-mode
* Thu Apr 17 2014
  - Make patch command work on older products
* Thu Apr 17 2014
  - Update to bash 4.3 with patch level 11
    * The `helptopic' completion action now maps to all the help topics, not just
      the shell builtins.
    * The `help' builtin no longer does prefix substring matching first, so
      `help read' does not match `readonly', but will do it if exact string
      matching fails.
    * The shell can be compiled to not display a message about processes that
      terminate due to SIGTERM.
    * Non-interactive shells now react to the setting of checkwinsize and set
      LINES and COLUMNS after a foreground job exits.
    * There is a new shell option, `globasciiranges', which, when set to on,
      forces globbing range comparisons to use character ordering as if they
      were run in the C locale.
    * There is a new shell option, `direxpand', which makes filename completion
      expand variables in directory names in the way bash-4.1 did.
    * In Posix mode, the `command' builtin does not change whether or not a
      builtin it shadows is treated as an assignment builtin.
    * The `return' and `exit' builtins accept negative exit status arguments.
    * The word completion code checks whether or not a filename containing a
      shell variable expands to a directory name and appends `/' to the word
      as appropriate.  The same code expands shell variables in command names
      when performing command completion.
    * In Posix mode, it is now an error to attempt to define a shell function
      with the same name as a Posix special builtin.
    * When compiled for strict Posix conformance, history expansion is disabled
      by default.
    * The history expansion character (!) does not cause history expansion when
      followed by the closing quote in a double-quoted string.
    * `complete' and its siblings compgen/compopt now takes a new `-o noquote'
      option to inhibit quoting of the completions.
    * Setting HISTSIZE to a value less than zero causes the history list to be
      unlimited (setting it 0 zero disables the history list).
    * Setting HISTFILESIZE to a value less than zero causes the history file size
      to be unlimited (setting it to 0 causes the history file to be truncated
      to zero size).
    * The `read' builtin now skips NUL bytes in the input.
    * There is a new `bind -X' option to print all key sequences bound to Unix
    * When in Posix mode, `read' is interruptible by a trapped signal.  After
      running the trap handler, read returns 128+signal and throws away any
      partially-read input.
    * The command completion code skips whitespace and assignment statements
      before looking for the command name word to be completed.
    * The build process has a new mechanism for constructing separate help files
      that better reflects the current set of compilation options.
    * The -nt and -ot options to test now work with files with nanosecond
      timestamp resolution.
    * The shell saves the command history in any shell for which history is
      enabled and HISTFILE is set, not just interactive shells.
    * The shell has `nameref' variables and new -n(/+n) options to declare and
      unset to use them, and a `test -R' option to test for them.
    * The shell now allows assigning, referencing, and unsetting elements of
      indexed arrays using negative subscripts (a[-1]=2, echo ${a[-1]}) which
      count back from the last element of the array.
    * The {x}<word redirection feature now allows words like {array[ind]} and
      can use variables with special meanings to the shell (e.g., BASH_XTRACEFD).
    * There is a new CHILD_MAX special shell variable; its value controls the
      number of exited child statues the shell remembers.
    * There is a new configuration option (--enable-direxpand-default) that
      causes the `direxpand' shell option to be enabled by default.
    * Bash does not do anything special to ensure that the file descriptor
      assigned to X in {x}<foo remains open after the block containing it
    * The `wait' builtin has a new `-n' option to wait for the next child to
      change status.
    * The `printf' %(...)T format specifier now uses the current time if no
      argument is supplied.
    * There is a new variable, BASH_COMPAT, that controls the current shell
      compatibility level.
    * The `popd' builtin now treats additional arguments as errors.
    * The brace expansion code now treats a failed sequence expansion as a
      simple string and will continue to expand brace terms in the remainder
      of the word.
    * Shells started to run process substitutions now run any trap set on EXIT.
    * The fc builtin now interprets -0 as the current command line.
    * Completing directory names containing shell variables now adds a trailing
      slash if the expanded result is a directory.
    * `cd' has a new `-@' option to browse a file's extended attributes on
      systems that support O_XATTR.
    * The test/[/[[ `-v variable' binary operator now understands array
  - Update to readline library 6.3 with patch level 5
    * Readline is now more responsive to SIGHUP and other fatal signals when
      reading input from the terminal or performing word completion but no
      longer attempts to run any not-allowable functions from a signal handler
    * There are new bindable commands to search the history for the string of
      characters between the beginning of the line and the point
      (history-substring-search-forward, history-substring-search-backward)
    * Readline allows quoted strings as the values of variables when setting
      them with `set'.  As a side effect, trailing spaces and tabs are ignored
      when setting a string variable's value.
    * The history library creates a backup of the history file when writing it
      and restores the backup on a write error.
    * New application-settable variable: rl_filename_stat_hook: a function called
      with a filename before using it in a call to stat(2).  Bash uses it to
      expand shell variables so things like $HOME/Downloads have a slash
    * New bindable function `print-last-kbd-macro', prints the most-recently-
      defined keyboard macro in a reusable format.
    * New user-settable variable `colored-stats', enables use of colored text
      to denote file types when displaying possible completions (colored analog
      of visible-stats).
    * New user-settable variable `keyseq-timout', acts as an inter-character
      timeout when reading input or incremental search strings.
    * New application-callable function: rl_clear_history. Clears the history list
      and frees all readline-associated private data.
    * New user-settable variable, show-mode-in-prompt, adds a characters to the
      beginning of the prompt indicating the current editing mode.
    * New application-settable variable: rl_input_available_hook; function to be
      called when readline detects there is data available on its input file
    * Readline calls an application-set event hook (rl_event_hook) after it gets
      a signal while reading input (read returns -1/EINTR but readline does not
      handle the signal immediately) to allow the application to handle or
      otherwise note it.
    * If the user-settable variable `history-size' is set to a value less than
      0, the history list size is unlimited.
    * New application-settable variable: rl_signal_event_hook; function that is
      called when readline is reading terminal input and read(2) is interrupted
      by a signal.  Currently not called for SIGHUP or SIGTERM.
    * rl_change_environment: new application-settable variable that controls
      whether or not Readline modifies the environment (currently readline
      modifies only LINES and COLUMNS).
  - Removed patches
    audit-rl-patch and audit-patch which are now upstream
    readline-6.2-msgdynamic.patch which is upstream
    bash-4.2-nsec.dif which is upstream
    config-guess-sub-update.patch which is upstream
  - Modify patches
    bash-4.2-2.4.4.patch becomes bash-4.3-2.4.4.patch
    bash-3.0-decl.patch becomes bash-4.3-decl.patch
    bash-4.0-loadables.dif becomes bash-4.3-loadables.dif
    bash-4.2-sigrestart.patch becomes bash-4.3-sigrestart.patch
    bash-4.0-headers.dif becomes bash-4.3-headers.dif
    bash-4.2-winch.dif becomes bash-4.3-winch.dif
    readline-4.3-input.dif becomes readline-6.3-input.dif
    readline-6.2-destdir.patch becomes readline-6.3-destdir.patch
    readline-6.2-rltrace.patch becomes readline-6.3-rltrace.patch
* Tue Apr 15 2014
  - Add bash upstream patch 47 to fix a problem where the function
    that shortens pathnames for $PS1 according to the value of
    $PROMPT_DIRTRIM uses memcpy on potentially-overlapping regions
    of memory, when it should use memmove.  The result is garbled
    pathnames in prompt strings.
  - Remove bash-4.2-prompt-dirtrim.patch as this was the original
    report of above.
* Tue Apr 01 2014
  - Add bash upstream patch 46 to fix a problem introduced by patch
    32 a problem with "$@" and arrays expanding empty positional
    parameters or array elements when using substring expansion,
    pattern substitution, or case modfication.  The empty parameters
    or array elements are removed instead of expanding to empty
    strings ("").
  - Add readline upstream patch 5: The readline shared library
    helper script needs to be updated for Mac OS X 10.9
* Tue Mar 18 2014
  - CVE-2014-2524: bash,readline: temporary file misuse in _rl_tropen (bnc#868822)
    Even if used only by developers to debug readline library do not
    open temporary files from public location without O_EXCL
* Fri Jan 31 2014
  - Add upstream patch bash-4.2-prompt-dirtrim.patch
    bash patch tar ball to solve some some cases strange output
    displayed in the prompt if PROMPT_DIRTRIM i sset.
* Fri Jul 12 2013
  - Reintroduce patch bash-4.2-winch.dif to solve bnc#828877
    accordingly to my test and upstream (search on
    for message-id <>)
* Mon Jul 08 2013
  - Add bash-4.2-strcpy.patch from upstream mailing list to patch
    collection tar ball to avoid when using \w in the prompt and
    changing the directory outside of HOME the a strcpy work on
    overlapping memory areas.
* Tue Jun 04 2013
  - add a conflict between readline5 and readline6-32bit
* Tue May 28 2013
  - Do not restart the sighandler after a trap is reset (bnc#820149)
* Thu Mar 21 2013
  - Add patch from upstream mailing list to speed up array handling
  - Add patch from upstream mailing list to avoid fdleaks
  - Use lsdiff to determine the depth of the leading slashes in a
    patch file
* Fri Mar 15 2013
  - Disable workaround for bnc#382214 due bnc#806628, let's see when
    the old bug will be up again.
  - Update bash 4.2 to patch level 45
    * When SIGCHLD is trapped, and a SIGCHLD trap handler runs when
      a pending `read -t' invocation times out and generates SIGALRM,
      bash can crash with a segmentation fault.
    * When converting a multibyte string to a wide character string
      as part of pattern matching, bash does not handle the end of
      the string correctly, causing the search for the NUL to go
      beyond the end of the string and reference random memory.
      Depending on the contents of that memory, bash can produce
      errors or crash.
    * The <&n- and >&n- redirections, which move one file descriptor
      to another, leave the file descriptor closed when applied to
      builtins or compound commands.
  - Use screen to provide a controlling terminal for running the
    test suite
* Tue Feb 12 2013
  - config-guess-sub-update.patch:
    Update config.guess/sub for aarch64
  - Fix check for negated warning switch
* Wed Jan 09 2013
  - Avoid autoconf on older products
  - Apply audit patch variant to readline as well as we use a shared
  - Avoid bash-devel on older products as older GNU make do not have
    a realpath builtin
* Tue Jan 08 2013
  - Do not trigger the export of COLUMNS or LINES due enforced
    checkwinsize (bnc#793536)
* Tue Jan 08 2013
  - Update bash 4.2 to patch level 42
    * Missing I/O errors if output redirection applied to builtin
      commands when the file descriptor was closed
    * Process substitution incorrectly inherited a flag that
      inhibited using the temporary environment for variable lookups
      if it was providing the filename to a redirection.
    * Compilation failed after specifying the `minimal config' option
* Mon Nov 05 2012
  - Update bash 4.2 to patch level 39
    * Official fix for the last crash fix
    * Avoid variable expansion in arithmetic expressions when
      evaluation is being suppressed
* Wed Oct 17 2012
  - Do not mix xmalloc/xfree of libreadline and bash by making the
    libreadline version weak symbols instead of private symbols
* Fri Aug 24 2012
  - Add patch from upstream mailing list to avoids crash
* Fri Jul 20 2012
  - Update bash 4.2 to patch level 37
    * Attempting to redo (using `.') the vi editing mode `cc', `dd',
      or `yy' commands leads to an infinite loop.
* Thu Jul 19 2012
  - Do not mask internal _rl symbols as internal as there are many
    tools out there which uses them (gdb as an example)
* Wed Jul 18 2012
  - libreadlib: try to avoid to bind references of the symbols
    rl_instream and rl_outstream
  - libreadlib: make private symbols really private
* Wed Jul 18 2012
  - Increase buffer for libreadline messsages if required
  - Include stdio.h in libreadline header files to get the declaration
    of FILES correct.
* Mon Jul 09 2012
  - Update bash 4.2 to patch level 36
    * Patch 25: When used in a shell function,
      `declare -g -a array=(compound assignment)' creates a local
      variable instead of a global one.
    * Patch 26: The `lastpipe' option does not behave correctly on
      machines where the open file limit is less than 256.
    * Patch 27: When the `extglob' shell option is enabled, pattern
      substitution does not work correctly in the presence of
      multibyte characters.
    * Patch 28: When using a word expansion for which the right hand
      side is evaluated, certain expansions of quoted null strings
      include spurious ^? characters.
    * Patch 29: Bash-4.2 tries to leave completed directory names as
      the user typed them, without expanding them to a full pathname.
      One effect of this is that shell variables used in pathnames
      being completed (e.g., $HOME) are left unchanged, but the `$'
      is quoted by readline because it is a special character to the shell.
    * Patch 30: When attempting to glob strings in a multibyte locale,
      and those strings contain invalid multibyte characters that cause
      mbsnrtowcs to return 0, the globbing code loops infinitely.
    * Patch 31: A change between bash-4.1 and bash-4.2 to prevent the
      readline input hook from being called too frequently had the side
      effect of causing delays when reading pasted input on systems such
      as Mac OS X.  This patch fixes those delays while retaining the
      bash-4.2 behavior.
    * Patch 32: Bash-4.2 has problems with DEL characters in the
      expanded value of variables used in the same quoted string as
      variables that expand to nothing.
    * Patch 33: Bash uses a static buffer when expanding the /dev/fd
      prefix for the test and conditional commands, among other uses,
      when it should use a dynamic buffer to avoid buffer overflow.
    * Patch 34: In bash-4.2, the history code would inappropriately add
      a semicolon to multi-line compound array assignments when adding
      them to the history.
    * Patch 35: When given a number of lines to read, `mapfile -n lines'
      reads one too many.
    * Patch 36: Bash-4.2 produces incorrect word splitting results when
      expanding double-quoted $@ in the same string as and adjacent to
      other variable expansions.  The $@ should be split, the other
      expansions should not.
  - Add patch to avoid double free or corruption due expanding number
    sequence with huge numbers. Patch will go upstream (bnc#763591)
* Tue Jun 26 2012
  - license update: GPL-3.0+
    Upstream declares the bash license to be GPL-3.0+ - not GPL-2.0+
* Mon Jun 11 2012
  - Enable auditing patch by simply applying it
* Wed May 23 2012
  - added auditing patch from
* Thu Apr 05 2012
  - Remove not required patch (was a fix for bnc#141394) which now
    cause a wrong behaviour if applied (bnc#755453)
* Tue Mar 13 2012
  - Update bash 4.2 to patch level 24
* Fri Mar 09 2012
  - Avoid endless loop in user completion caused by endpw patches
* Tue Mar 06 2012
  - Add small patch for be able to use nanoseconds in comparision
    of time stamps of files (bnc#750640)
* Tue Mar 06 2012
  - Reenable patch for bnc#725657 with latest change from latest
    git repository of the patch.
* Tue Dec 20 2011
  - add autoconf as buildrequire to avoid implicit dependency
* Mon Dec 19 2011
  - remove suse_update_config calls - obsolete
* Fri Nov 25 2011
  - Make build check quiet
* Fri Nov 25 2011
  - Update bash 4.2 to patch level 20
  - Update readline 6.2 to patch level 2
* Mon Nov 21 2011
  - Disable endpwent() in rl_username_completion_function() as this
    cause a deadlock in a futex of the glibc (bnc#731556)
* Fri Nov 18 2011
  - Enforce bind references to global function symbols to the
    definition within libreadline
* Wed Nov 16 2011
  - Use libtinfo if available otherwise libncurses, this avoids
    linkage against libncursesw of libreadline (required due
    bnc #729226)
* Fri Nov 11 2011
  - Avoid memory mapped /var/run/nscd/passwd at shutdown by simply
    unmapping this only used area if parent is systemd or SysVinit
* Fri Nov 11 2011
  - Always close get(pw|gr)func with endpw() respectivly with endgr()
    to avoid memory mapped passwd/groups of cache files from nscd
* Wed Nov 02 2011
  - Disable last patch as it seems a bit broken (bnc#725657)
* Tue Oct 25 2011
  - Add direxpand patch from upstream (bnc#725657)
* Fri Oct 07 2011
  - Add patch from upstream mailing list to avoid memory leak by
    reassigning associative array variable
* Mon Sep 19 2011
  - remove autoreqprov and author lists
* Tue Jun 21 2011
  - Add fix from upstream mailing list to avoid crash
* Fri Jun 17 2011
  - use original source URLs
* Thu Jun 16 2011
  - Fix the fix for bug bnc#681286 to be able to avoid both a not
    expanding glob as well as the infinit loop in multi byte locale
* Thu May 12 2011
  - Update bash 4.2 to patch level 10
  - Add patch from upstream to avoid loosing quoted-nulls
  - Add modified patch to avod endless loop in UTF-8 locale
* Tue Mar 22 2011
  - Remove patch to avod endless loop in UTF-8 locale as it breaks
    glob expanding (bnc#681286)
* Tue Mar 15 2011
  - Update bash 4.2 to patch level 8
  - Add Ctr-C patch from upstream
  - Add fix for endless loop in UTF-8 locale
* Wed Mar 09 2011
  - Avoid siglongjmp, compare with
    use temprary solution from Chet
* Tue Mar 08 2011
  - Much better solution for saving history for system with sigsetjmp
* Tue Mar 08 2011
  - Reintroduce history saving at SIGHUP
* Mon Mar 07 2011
  - Update bash 4.2 to patch level 7
* Thu Feb 17 2011
  - having a bash man page is recommended (bnc#672528)
* Mon Feb 14 2011
  - Update to bash 4.2 -- changelog see entry for bash 4.2 rc1
* Mon Jan 17 2011
  - Update to bash 4.2 rc1
    * `exec -a foo' now sets $0 to `foo' in an executable shell script
      without a leading #!.
    * Subshells begun to execute command substitutions or run shell functions or
      builtins in subshells do not reset trap strings until a new trap is
      specified.  This allows $(trap) to display the caller's traps and the
      trap strings to persist until a new trap is set.
    * `trap -p' will now show signals ignored at shell startup, though their
      disposition still cannot be modified.
    * $'...', echo, and printf understand \uXXXX and \UXXXXXXXX escape sequences.
    * declare/typeset has a new `-g' option, which creates variables in the
      global scope even when run in a shell function.
    * test/[/[[ have a new -v variable unary operator, which returns success if
      `variable' has been set.
    * Posix parsing changes to allow `! time command' and multiple consecutive
      instances of `!' (which toggle) and `time' (which have no cumulative
    * Posix change to allow `time' as a command by itself to print the elapsed
      user, system, and real times for the shell and its children.
    * $((...)) is always parsed as an arithmetic expansion first, instead of as
      a potential nested command substitution, as Posix requires.
    * A new FUNCNEST variable to allow the user to control the maximum shell
      function nesting (recursive execution) level.
    * The mapfile builtin now supplies a third argument to the callback command:
      the line about to be assigned to the supplied array index.
    * The printf builtin has a new %(fmt)T specifier, which allows time values
      to use strftime-like formatting.
    * There is a new `compat41' shell option.
    * The cd builtin has a new Posix-mandated `-e' option.
    * Negative subscripts to indexed arrays, previously errors, now are treated
      as offsets from the maximum assigned index + 1.
    * Negative length specifications in the ${var:offset:length} expansion,
      previously errors, are now treated as offsets from the end of the variable.
    * Parsing change to allow `time -p --'.
    * Posix-mode parsing change to not recognize `time' as a keyword if the
      following token begins with a `-'.  This means no more Posix-mode
      `time -p'.  Posix interpretation 267.
    * There is a new `lastpipe' shell option that runs the last command of a
      pipeline in the current shell context.  The lastpipe option has no
      effect if job control is enabled.
    * History expansion no longer expands the `$!' variable expansion.
    * Posix mode shells no longer exit if a variable assignment error occurs
      with an assignment preceding a command that is not a special builtin.
    * History expansion no longer expands the `$!' variable expansion.
    * Posix mode shells no longer exit if a variable assignment error occurs
      with an assignment preceding a command that is not a special builtin.
    * Non-interactive mode shells exit if -u is enabled and an attempt is made
      to use an unset variable with the % or # expansions, the `//', `^', or
      `,' expansions, or the parameter length expansion.
    * Posix-mode shells use the argument passed to `.' as-is if a $PATH search
      fails, effectively searching the current directory.  Posix-2008 change.
  - Update to readline 6.2 rc1
    * The history library does not try to write the history filename in the
      current directory if $HOME is unset.  This closes a potential security
      problem if the application does not specify a history filename.
    * New bindable variable `completion-display-width' to set the number of
      columns used when displaying completions.
    * New bindable variable `completion-case-map' to cause case-insensitive
      completion to treat `-' and `_' as identical.
    * There are new bindable vi-mode command names to avoid readline's case-
      insensitive matching not allowing them to be bound separately.
    * New bindable variable `menu-complete-display-prefix' causes the menu
      completion code to display the common prefix of the possible completions
      before cycling through the list, instead of after.
* Mon Oct 18 2010
  - fix czech message
* Thu Oct 14 2010
  - Update bash 4.1 to patch level 9
    * When declaring an associative array and implicitly assigning a
      value to element "0", bash does not correctly allocate memory,
      leading to a segmentation violation when that element or the
      array itself is unset.
    * An arriving SIGCHLD will interrupt `slow' system calls such as
      write(2) to or read(2) from a terminal.  This results in an
      error message and truncated input or output.
* Fri Sep 03 2010
  - builtin "man2html"generates html manual with a timestamp
    that causes the package to be published over and over again.
* Mon Aug 16 2010
  - A modified version of the pipe patch which should handle
    the PIPESTATUS array
* Fri Aug 13 2010
  - Disable the pipe patch from Thu Jun 24 10:40:09 CEST 2010
    as this resets the PIPESTATUS array to the status of the
    forground process only
* Thu Jul 29 2010
  - Add fix from mailing list to avoid crash
* Mon Jul 19 2010
  - Comment out recommendation of bash-completion, as I'd like
    no to see the bugs of bash-completion in my bugzilla
* Sat Jul 17 2010
  - Do not package static libraries
  - Fix Recommends/Suggests
* Thu Jun 24 2010
  - Add fix from upstream: restore the parser state over changing
    readline editing mode otherwise e.g. set alias before the
    change are lost.
* Thu Jun 24 2010
  - Avoid running the last member of a pipe command sequence to run
    in its own subshell, this makes know lines like the simple
    echo 1 2 | read a b; echo $a $b
    work as expected by the users
* Tue May 25 2010
  - Update bash 4.1 to patch level 7
    * Bash did not correctly print/reproduce here documents attached
      to commands inside compound commands such as for and while.
    * A typo caused bash to not honor a precision specification in a
      printf format.
* Mon Apr 12 2010
  - Add fix for memory double free in array handling
* Tue Apr 06 2010
  - Update bash 4.1 to patch level 5 (related to bnc#522351)
    * If command completion is attempted on a word with a quoted globbing
      character (e.g., `*' or `?'), bash can reference a NULL pointer and
      dump core.
    * When running in Posix mode and executing a shell function without local
      variables, bash will not propagate a variable in a special builtin's temporary
      environment to have global scope.
    * When the `read' builtin times out after the timeout specified with -t is
      exceeded, it does not reset the flags that tell signal handlers to process
      signals immediately instead of deferring their handling.  This can result
      in unsafe functions being called from signal handlers, which can cause bash
      to hang or dump core.
* Tue Mar 09 2010
  - Add patch from bash-bug list to avoid crahs on some strange
    TAB completions
* Mon Mar 01 2010
  - fix warning no return statement in function returning non-void
    to fix build (in bashline.c)
* Wed Feb 24 2010
  - Avoid hang due malloc()/free() within signal handler (bnc#522351)
* Thu Feb 18 2010
  - Add patch to reflect the usage of /etc/bash.bashrc (bnc#577221)
* Mon Feb 15 2010
  - Update bash 4.1 to patch level 2
    * Here-documents within $(...) command substitutions may once more be
      delimited by the closing right paren, instead of requiring a newline.
    * Bash's file status checks (executable, readable, etc.) now take file
      system ACLs into account on file systems that support them.
    * Bash now passes environment variables with names that are not valid
      shell variable names through into the environment passed to child
    * The `execute-unix-command' readline function now attempts to clear and
      reuse the current line rather than move to a new one after the command
    * `printf -v' can now assign values to array indices.
    * New `complete -E' and `compopt -E' options that work on the "empty"
      completion: completion attempted on an empty command line.
    * New complete/compgen/compopt -D option to define a `default' completion:
      a completion to be invoked on command for which no completion has been
      defined.  If this function returns 124, programmable completion is
      attempted again, allowing a user to dynamically build a set of completions
      as completion is attempted by having the default completion function
      install individual completion functions each time it is invoked.
    * When displaying associative arrays, subscripts are now quoted.
    * Changes to dabbrev-expand to make it more `emacs-like': no space appended
      after matches, completions are not sorted, and most recent history entries
      are presented first.
    * The [[ and (( commands are now subject to the setting of `set -e' and the
      ERR trap.
    * The source/. builtin now removes NUL bytes from the file before attempting
      to parse commands.
    * There is a new configuration option (in config-top.h) that forces bash to
      forward all history entries to syslog.
    * A new variable $BASHOPTS to export shell options settable using `shopt' to
      child processes.
    * There is a new confgure option that forces the extglob option to be
      enabled by default.
    * New variable $BASH_XTRACEFD; when set to an integer bash will write xtrace
      output to that file descriptor.
    * If the optional left-hand-side of a redirection is of the form {var}, the
      shell assigns the file descriptor used to $var or uses $var as the file
      descriptor to move or close, depending on the redirection operator.
    * The < and > operators to the [[ conditional command now do string
      comparison according to the current locale if the compatibility level
      is greater than 40.
    * Programmable completion now uses the completion for `b' instead of `a'
      when completion is attempted on a line like: a $(b c.
    * Force extglob on temporarily when parsing the pattern argument to
      the == and != operators to the [[ command, for compatibility.
    * Changed the behavior of interrupting the wait builtin when a SIGCHLD is
      received and a trap on SIGCHLD is set to be Posix-mode only.
    * The read builtin has a new `-N nchars' option, which reads exactly NCHARS
      characters, ignoring delimiters like newline.
    * The mapfile/readarray builtin no longer stores the commands it invokes via
      callbacks in the history list.
    * There is a new `compat40' shopt option.
  - Update readline 6.1 to patch level 1
    * New bindable function: menu-complete-backward.
    * In the vi insertion keymap, C-n is now bound to menu-complete by default,
      and C-p to menu-complete-backward.
    * When in vi command mode, repeatedly hitting ESC now does nothing, even
      when ESC introduces a bound key sequence.  This is closer to how
      historical vi behaves.
    * New bindable function: skip-csi-sequence.  Can be used as a default to
      consume key sequences generated by keys like Home and End without having
      to bind all keys.
    * New application-settable function: rl_filename_rewrite_hook.  Can be used
      to rewite or modify filenames read from the file system before they are
      compared to the word to be completed.
    * New bindable variable: skip-completed-text, active when completing in the
      middle of a word.  If enabled, it means that characters in the completion
      that match characters in the remainder of the word are "skipped" rather
      than inserted into the line.
    * The pre-readline-6.0 version of menu completion is available as
      "old-menu-complete" for users who do not like the readline-6.0 version.
    * New bindable variable: echo-control-characters.  If enabled, and the
      tty ECHOCTL bit is set, controls the echoing of characters corresponding
      to keyboard-generated signals.
    * New bindable variable: enable-meta-key.  Controls whether or not readline
      sends the smm/rmm sequences if the terminal indicates it has a meta key
      that enables eight-bit characters.
* Wed Dec 16 2009
  - package documentation as noarch
* Sat Dec 12 2009
  - add baselibs.conf as a source
* Fri Dec 04 2009
  - Fix bug in bash-4.0-security.patch (bnc#559877)
* Thu Oct 29 2009
  - Update to newest patch level 35
    * bash incorrectly interprets wildcarded path components between
      a **/ and the last /
    * bash incorrectly treated single and double quotes as
      delimiters rather than introducing quoted strings when
      splitting the line into words for programmable completion
* Wed Sep 30 2009
  - Make _rl_enable_meta configurable by the users (bnc#541379)
* Wed Sep 09 2009
  - Do not change tty owner group twice by child and parent (bnc#523667)
* Wed Sep 09 2009
  - Update to newest patch level 33
    * Includes one of our own patches
* Wed Aug 26 2009
  - rediff patches to avoid fuzz
* Tue Jul 28 2009
  - Update to newest patch level 28
* Thu Jul 02 2009
  - Add fix from bash maintainer for closing memory leak in read
    builtin (bnc#510288)
* Tue Jun 09 2009
  - Branch off some sub packages:
    * bash-lang to include localization
    * bash-loadables for installing the loadable runtime builtins
    * bash-devel to install headers for developing loadable builtins
* Wed Jun 03 2009
  - Enforce the usage of euidaccess(3) instead of stat(2) for testing
    permissions for a file (bnc#509105)
* Mon May 25 2009
  - Update to newest patch level 24:
    * include last few patches
  - Add patches from mailing list for globstar expansion
* Mon May 11 2009
  - Increase size of hash table for runtime linker a lot
* Mon Apr 27 2009
  - Add patches from mailing list:
    * fix problem with invisible characters in prompt
    * make dir*/** work
* Tue Apr 21 2009
  - Do not crash on forbidden subdirectories with globstar extension
* Wed Apr 15 2009
  - Add fix to be able to clear to eol in readline library
* Tue Apr 14 2009
  - Add fix for timing issue in readline SIGWINCH handling
* Wed Apr 08 2009
  - Add patches from to avoid eg. segmentation fault
* Mon Mar 16 2009
  - Add patches from to avoid eg. segmentation fault
* Thu Mar 12 2009
  - Add patch from to enable |& not only for
    builtins and shell functions but for all commands.
* Tue Mar 10 2009
  - Switch to official patches, now we are on patch level 10
* Wed Mar 04 2009
  - Use patches from to make it work
* Wed Mar 04 2009
  - Patch for bnc#481817 does not work in any case
* Wed Mar 04 2009
  - My last patch for bnc#470548 send to was not
    fully applied and this had caused a memory corruption on tab
  - Enable the parser to find closing parenthesis at the end of
    an argument of a command even if backslash is used (bnc#481817)
  - Correct link of shared libraries of devel readline package
* Fri Feb 27 2009
  - Update bash 4.0 to patch level 0
  - Update readline 6.0 to patch level 0
* Wed Feb 18 2009
  - Add readline patch 13
* Fri Jan 30 2009
  - Restore state if shell function for completion is interrupted (bnc#470548)
* Tue Jan 13 2009
  - obsolete old -XXbit packages (bnc#437293)
* Fri Dec 19 2008
  - Enable large file support (bnc#460560)
* Tue Dec 09 2008
  - Add bash patches 40-48.
* Tue Nov 25 2008
  - Parse the return value of setlocale(LC_ALL) (bnc#447846)
* Thu Oct 16 2008
  - Let's avoid not needed library dependencies (bnc#439051)
* Mon Sep 01 2008
  - bash should suggest command-not-found, not scout
* Thu Jul 24 2008
  - Add command-not-found.patch for scout support (fate#303730)
* Tue Jun 17 2008
  - Avoid underline the full paragraph in the man page (bnc#400767)
* Sat May 17 2008
  - fix rename of xxbit packages
* Tue May 06 2008
  - Add bash patches 34-39.
* Mon Apr 28 2008
  - Fix last patch.
* Thu Apr 24 2008
  - Add workaround for bnc#382214
* Thu Apr 10 2008
  - added baselibs.conf file to build xxbit packages
    for multilib support
* Wed Apr 02 2008
  - Allow to (re)send signals within trap handlers (bnc#345441)
  - Clear exit status if not sourcing system profile (bnc#372061)
* Thu Feb 28 2008
  - remove invalid filerequires, the libreadline5 dependency is enough
* Mon Jan 28 2008
  - Add bash patches 26-33.
* Tue Jan 08 2008
  - Restart the signal handler for SIGCHLD if not already done
    within the signal handler its self (may help for bug #345441)
* Mon Jan 07 2008
  - Fix memory leak in read builtin.
* Fri Dec 07 2007
  - Add skel files .bashrc, bash_history, and .profile from aaa_skel
* Tue Dec 04 2007
  - Extend fix for off-by-one error in libreadline (bug #274120)
  - Enable ssh detection in the bash (bug #345570)
* Thu Sep 20 2007
  - Remove error triggering path requirement (bug #326751)
* Sun Aug 26 2007
  - Add bash patches 18-25.
* Sat Aug 11 2007
  - Add bash patches 10-17.
* Fri Aug 03 2007
  - fix devel requires
* Fri Aug 03 2007
  - Fix dependencies.
* Tue Jul 31 2007
  - Branch off bash-doc and readline-doc (bug #260209)
  - Rename readline to libreadline5 (bug #260209)
* Thu Apr 19 2007
  - Fix bug in readline redisplay.
* Thu Mar 29 2007
  - add ncurses-devel requires to readline-devel
* Mon Mar 26 2007
  - Add bison and ncurses-devel BuildRequires.
* Tue Mar 06 2007
  - Fix order of changelog entries.  Remove duplicate entry.
* Wed Feb 28 2007
  - Don't access buffer but resulting pointer for array element names
    to avoid the not initialized area of the buffer.  This also fixes
    an inherent wrong calculation of the string length of the array
    element names (bug #248717)
* Thu Dec 14 2006
  - Update to bash 3.2 patch level 9
* Wed Dec 06 2006
  - Remove obsolete patches.
* Fri Nov 17 2006
  - Remove /usr/bin/bash (#206000)
* Tue Nov 14 2006
  - Update to bash 3.2 patch level 5
* Wed Sep 27 2006
  - Use PIE to make a shared bash binary
  - Make the bash modules build for testing
* Fri Sep 22 2006
  - Remove rpath option for libraries use linker defaults instead
* Fri Sep 22 2006
  - Add symbolic link for POSIX bourne shell to /usr/bin/ (#206000)
* Thu Sep 14 2006
  - Add environment variable DEFAULT_BELL_STYLE to control the
    bell style of the readline library without using intputrc.
* Mon Aug 07 2006
  - Let readline-devel requires (bug #188673)
* Thu Jul 27 2006
  - Let printf builtin handle stdout errors correctly (bug #190349)
* Wed May 31 2006
  - Fix crash in IFS multi byte handling (bug #180317)
* Tue May 23 2006
  - Make the test suite run even on ppc emulated on ppc64
* Mon May 15 2006
  - Update bash 3.1 to patch level 17
    * Allow array subscripts to be sourounded by double quotes
  - Run test suite with nearly all scripts
* Mon Apr 03 2006
  - Update bash 3.1 to patch level 16
    * Bash will dump core when attempting to perform globbing in
      directories with very large numbers of files
    * Solve problem with the extended globbing code prevented dots
      from matching filenames when used in some matching patterns
* Mon Mar 27 2006
  - Use access(2) with temporary switched euid/ruid and egid/rgid
    instead of stat(2) to determine the access permissions of a
    file, this works even on RO mounted NFS file systems (#160513)
* Wed Mar 22 2006
  - Be sure that ~/.inputrc is read even if INPUTRC is set to
    system wide /etc/inputrc (bug #160003)
  - Make prefix-meta work even with new readline syntax but
    disable it by default (since bug #suse21096)
* Mon Mar 20 2006
  - Update to bash 3.1 to patch level 14 and readline 5.1 to level 4
    * Do not terminate words prematurely if parentheses are involved
    * Readline sometimes reference freed memory
    * Fix double displayed prompt when using non-incremental searches
* Sun Mar 12 2006
  - Update bash31-010 patch, better fix for #151000.
* Thu Mar 02 2006
  - Update bash 3.1 to patch level 11 and readline 5.1 to level 2
    * Includes fix for line-wrapping errors
    * Replacement for bug fix of bug #146075 with better
      reallocation and compaction of the job array list.
    * Do not let SIGINT from terminal reach background processes
    * Do not let asynchronous background jobs set the terminal
      process group incorrectly.
    * Replacement for bug fix of bug #151000
    * Do not strip quoting inside double-quoted command substitutions
* Wed Mar 01 2006
  - Re-enable escaping newline within quotes in commands (#151000)
* Mon Jan 30 2006
  - Do initialize the fresh members of the job array (bug #146075)
* Mon Jan 30 2006
  - Barf if /proc is missing.
* Wed Jan 25 2006
  - converted neededforbuild to BuildRequires
* Tue Jan 10 2006
  - Update to newest patch level 5:
    + corrects several omissions in the bash documentation
    + local array variable declared at function scope shadowing
      a global variable should create a separate instance
    + When tilde expansion fails, do not skip rest of an expansion
  - Expand dollar quotes even for the single quote case (bug #141394)
* Thu Dec 22 2005
  - Switch to first patchlevel for the bash and the readline library.
    This should fix problems happen with local/eval/let builtins.
* Mon Dec 19 2005
  - Remove dangling sym links
* Tue Dec 13 2005
  - Fix segfault in readline callback interface.
* Mon Dec 12 2005
  - Fix return of random data.
* Fri Dec 09 2005
  - Update to bash version 3.1 and readline library version 5.1
* Thu Sep 29 2005
  - More cookie for the compiler
* Mon Sep 19 2005
  - Give the compiler its cookie
* Tue Apr 19 2005
  - fixed crashing on read -e command and line wrapping (in readline code)
    (bug #76709)
* Fri Jan 28 2005
  - Add workaround for NFS bug which does not check permissions
    on open of a file but close (bug #20244)
* Thu Nov 25 2004
  - Remove local array patch because not needed anymore
  - Fix a crash on internal arrays if unset during execution of
    functions and files (bug #48511)
* Sun Nov 21 2004
  - Add patches from <> and
* Fri Nov 19 2004
  - Fix the evalexp fix (bug #48253)
* Mon Oct 25 2004
  - Be sure that the FN macro nroff macro is available in all
    sub manual pages (bug #47560)
* Tue Oct 12 2004
  - Re-activate first part of prompt fix because it does not harm
    (bug #36919)
* Tue Oct 12 2004
  - no macros in Version lines
* Mon Oct 11 2004
  - Disable prompt patch for now because not needed and other
    problmes caused by this fix (bug #36919)
  - Clear out last_made_pid on success (bug #42232)
* Thu Sep 30 2004
  - Clear out prompt line of isearch for invisible chars (bug #36919)
* Wed Sep 29 2004
  - Fix prompt problem with invisible characters (bug #36919)
* Fri Sep 17 2004
  - Fix line wraping for newlines in prompt (bug #45519)
* Wed Sep 15 2004
  - Fix missing return value.
* Sat Sep 11 2004
  - Disable use of WCONTINUED as long as bash does not check if
    it is supported.
* Mon Sep 06 2004
  - Fix prefix strip for last added patch
* Fri Sep 03 2004
  - Add warning about broken glibc locale before we get the SIGSEGV
    (bug #44658)
* Sun Aug 01 2004
  - Fix rl_maybe_save_line.
  - Track LC_TIME.
* Fri Jul 30 2004
  - Put version to bash 3.0 and readline 5.0
* Mon Jun 07 2004
  - Add missed declaration of oldval for previous bugfix
* Fri Jun 04 2004
  - Fix local array variable handling (bug #41649)
* Wed Jun 02 2004
  - Fix evaluation none local return stack curruption (bug #41488)
* Wed Apr 07 2004
  - In case of quotes position counter has to be advanced (#38599)
* Thu Apr 01 2004
  - Add directoy check to distinguish none unique and unique
    executables  (bug #37329)
* Mon Mar 29 2004
  - Make the directory patch working as it should (bug #37329)
* Thu Mar 25 2004
  - Move forward to official bug fixes to catch UTF-8 bug #31451
    and bug #36919
* Thu Feb 12 2004
  - Fix cut&paste error of fix for bug #34427
* Wed Feb 11 2004
  - Fix SIGSEGV in using UTF-8 and pattern matching (bug #34427)
  - Fix LC_NUMERIC handling of builtin printf (bug #34428)
* Mon Feb 02 2004
  - Fix the fix and also bug #34242
* Thu Jan 29 2004
  - Fix performance problem for pattern matching in UTF-8 locale
    (port back patch from Mitsuru Chinen <>)
* Tue Jan 13 2004
  - Fix last changes
* Sat Jan 10 2004
  - add %run_ldconfig
* Mon Jul 28 2003
  - Add /etc/bash_completion.d directory
* Thu Jun 26 2003
  - Fix specfile for lib64
* Wed Jun 04 2003
  - Enable profile feedback
* Fri May 23 2003
  - remove unpackaged files
* Thu May 22 2003
  - improvement for bash-2.05b-locale.patch and
    bash-2.05b-readline-init.patch: this fixes the problem that
    the line editor in bash is not correctly initialized in the first
    bash after login via ssh or on the linux console. This is
    especially obvious in UTF-8 locales when editing non-ASCII
    characters on the command line. See also:
    The following bug remains fixed:
  - bash-2.05b-complete.patch: (by Miloslav Trmac <>)
    achieve correct alignment of file names containing non-ASCII
    characters when typing "ls " and pressing Tab twice to show
    the completions. See also:
* Mon Mar 17 2003
  - Do not execute command line if tty is closed (bug #25445)
* Thu Feb 13 2003
  - Fix prompt decoding with -noediting.
* Tue Feb 11 2003
  - To avoid loop in PreRequires, don't install info pages. The info
    package contains a dir file which contains the bash entries
* Fri Feb 07 2003
  - fixed specfile
* Fri Feb 07 2003
  - added install_info macros
* Mon Jan 27 2003
  - Fix bugs #21096 and #21392 properly: don't recurse on
    do-lowercase-version for fallback entry.
* Tue Jan 21 2003
  - Allow rbash as login shell (`-' problem, bug #22917)
* Wed Dec 18 2002
  - Use BuildRoot.
* Thu Dec 12 2002
  - add bash-2.05b-display-mbspeed.patch received from
    Jiro SEKIBA <> to improve display speed in
    multibyte locales.
* Sat Nov 09 2002
  - add bison to neededforbuild for now
    (till we're sure about bison again)
* Thu Oct 31 2002
  - For bug #21096 and #21392: implement an oom protection.
* Mon Oct 21 2002
  - More for bug#21096: Make prefix-meta work even if mapped onto
    longer escape sequences.
* Fri Oct 18 2002
  - Fix bug#21096: sequences like `ESC ... CHARACTER' with CHARACTER
    mapped on functions will not cause an endless recursion anymore.
* Wed Sep 25 2002
  - removed more bogus provides
* Wed Sep 11 2002
  - Correct Provides (package should not provides its self)
* Fri Aug 30 2002
  - Add version dependend require on readline (bug #18652)
* Fri Aug 30 2002
  - Fix annoying display bug in wide character support (bug #18449)
* Wed Aug 28 2002
  - Add comment about multi byte handling and echo builtin (#18449)
* Wed Aug 21 2002
  - fix $RANDOM randomness in subshells
* Fri Aug 09 2002
  - readline-devel should require readline
* Mon Jul 29 2002
  - Expansion of `~user/<dir>' is like `/<dir>'
* Sat Jul 27 2002
  - Remove not used tetex from neededforbuild
  - Fix building of man2html (bash.html still broken)
* Fri Jul 19 2002
  - Check value of LANG before LC_ALL will be unset for getting the
    _current_ default value of LC_ALL with setlocale(3) (bug #16999)
* Fri Jul 19 2002
  - Fix NULL pointer handled by memset (readline:mbutil.c)
* Thu Jul 18 2002
  - Update to new version bash 2.05b/readline 4.3
* Wed May 22 2002
  - Fix vi-change-char.
  - Fix missing declaration.
* Wed Apr 17 2002
  - Fix last change.
* Thu Apr 11 2002
  - using %{_libdir} to put the shlibs into the correct directories
    (lib / lib64)
* Tue Mar 26 2002
  - Fix possible endless loop if terminal will be disconneted during
    complete answer (bug report from, for more see
* Tue Mar 19 2002
  - removed tetex from neededforbuild, it's not used here
* Wed Mar 06 2002
  - Use improved bug fix for line wrapping problem, now line wrapping
    work for char and wide char environments
  - Fix readline version number
* Wed Feb 27 2002
  - add readline-4.2-i18n-0.3-display.patch from
    Jiro SEKIBA <> to fix a line wrapping
* Mon Jan 21 2002
  - Fix bug #12834: Update to bash-2.05-i18n-0.5.patch.gz and
* Thu Oct 18 2001
  - Allways include /etc/inputrc if INPUTRC isn't system file
* Mon Oct 08 2001
  - Fix readline i18n patch: enable configure of multi byte handling,
    fix warnings and bug in histexpand.c
* Fri Oct 05 2001
  - Add two patches for I18N support of bash and readline library
* Tue Sep 04 2001
  - Add patch to avoid trouble with C++ header definitions
* Fri Aug 03 2001
  - Fix fc crash (bug #9620)
* Mon Jul 02 2001
  - dont apply bash-2.05-s390x-unwind.patch on ppc and sparc
* Wed Jun 13 2001
  - fix 64-bit bigendian bug for s390x
* Wed Jun 06 2001
  - Re-order to avoid trouble with new autoconf
* Tue May 08 2001
  - bzip2 sources
* Sat May 05 2001
  - Fix process substitution when stdin is closed.
* Wed May 02 2001
  - Make patch for 2.4.4 work within spec
* Wed May 02 2001
  - Remove buggy patch in job control, add a workaround
* Mon Apr 30 2001
  - Add patch to get job control into right order on a pipe
* Thu Apr 12 2001
  - Provide cpp macro OLD_READLINE for backwards compatibility
    at compile time with old readline interface
* Wed Apr 11 2001
  - added split-alias as provides (again)
* Wed Apr 11 2001
  - Update to bash 2.05 and readline 4.2
  - Port of our patches
* Thu Feb 22 2001
  - Split package into bash/readline/readline-devel
  - Depend libreadline on libncurses
* Thu Sep 14 2000
  - Add some bug fixes
  - Add missed ssh fix for none interactive shell
* Wed Jun 07 2000
  - Fix some patches
  - Add export patch for bash 2.04
  - Fix `soname' of readline and history libraries
  - Fix linkage of major readline and history libraries
* Mon Jun 05 2000
  - Fix unwind_protect_pointer on 64-bit systems.
* Wed May 31 2000
  - Comment out declaration of savestring in <readline.h> that conflicts
    with other people's declaration (eg. gdb).
* Mon May 29 2000
  - Upgrade to bash 2.04 and readline 4.1.
* Sun May 21 2000
  - Use docdir
* Sat Apr 01 2000
  - remove obviosly unneeded link /usr/lib/ on s390
* Tue Mar 14 2000
  - Add locale patch to enable LC_NUMERIC handling
* Thu Feb 24 2000
  - Use $VENDOR for several linux architectures
  - Set check_window_size (shopt checkwinsize) to true, this will
    correct screen size even if it changes during a job.
* Tue Feb 15 2000
  - Update config.{guess,sub} to latest version.
  - Fix spec file to create doc directory before installing into it.
* Fri Jan 28 2000
  - Add mailstat patch (handles mail directories)
  - Fix configuration (system is %arch-suse-linux)
  - Fix segfault (job handling)
  - Fix manual (add rbash manual, add some missed options)
  - Install rbash (symlink to bash)
  - Fix readline (End, Del)
  - Fix temporary file handling (do not write without check)
  - Use system random interface not builtin
  - Remove some compiler warnings
  - Set --enable-disabled-builtins (useful)
  - Install shared readline and history in /lib (bash needs that)
  - Enable shared readline (version 4.0) and history library
  - Try to use shared readline and history for bash (TEST)
* Fri Dec 03 1999
  - added command to make and install doc/bashref.html
* Fri Nov 26 1999
  - Fix spec file
* Thu Nov 25 1999
  - Merge Makefile.Linux with spec file, use RPM_OPT_FLAGS
  - Remove --disable-dparen-arithmetic
* Mon Sep 13 1999
  - ran old prepare_spec on spec file to switch to new prepare_spec.
* Tue Aug 24 1999
  - fixed for PPC
* Mon Jul 19 1999
  - update to bash 2.03, readline 4.0
* Wed Jan 13 1999
  - disabled `Broken pipe' messages
* Sun Dec 13 1998
  - removed notify message - bash 2.0 is standard for a long time now.
* Mon Dec 07 1998
  - remove SSH_CLIENT-kludge as this cannot detect all correct cases
    where .bashrc should be loaded
  - delete email-changes in bashbug script
  - update readline to version 2.2.1
* Thu Nov 12 1998
  - minor fix for new rpm
* Thu Oct 01 1998
  - update to 2.02.1 / reintegrated werner's tmp-fix for bashbug
* Thu Jul 23 1998
  - use mktemp
* Thu Jul 16 1998
  - fix bashbug temp file handling
* Wed Jun 17 1998
  - changed general.h: !defined (gid_t)
* Mon Oct 27 1997
  - do not include old compatible-only safestring() in libreadline.a
* Thu Oct 09 1997
  - update to version 2.01.1
  - add several bugfixes
  - fix missing things in spec-file
* Thu Aug 14 1997
  - add several bug-fixes from gnu.bash.bug and fix memory management
    of LC_ALL
* Sat Jul 05 1997
  - add another bugfix from gnu.utils.bugs
* Mon Jun 23 1997
  - create the history file with 0600 perms
  - add minor bugfix to check for new email
* Thu Jun 05 1997
  - bash: check for NULL-pointer before calling "savestring()"
  - add and newer FAQ
* Tue Apr 22 1997
  - added FAQ and bashref.html to /usr/doc/packages/bash
* Sun Apr 13 1997
  - update to bash 2.0 with lots of patches from gnu.utils.bugs
    Mon Sep  2 02:48:35 MET DST 1996
    new version with security patches
* Thu Jan 02 1997
  security fix included (0xff was command separator)
    This document details the changes between this version, bash-4.1-rc,
    and the previous version, bash-4.1-beta.



Generated by rpm2html 1.8.1

Fabrice Bellet, Wed Aug 10 23:54:44 2022