Index index by Group index by Distribution index by Vendor index by creation date index by Name Mirrors Help Search

NetworkManager-cloud-setup-1.38.2-2.1 RPM for aarch64

From OpenSuSE Ports Tumbleweed for aarch64

Name: NetworkManager-cloud-setup Distribution: openSUSE Tumbleweed
Version: 1.38.2 Vendor: openSUSE
Release: 2.1 Build date: Tue Jun 28 15:54:11 2022
Group: System Environment/Base Build host: obs-arm-11
Size: 139884 Source RPM: NetworkManager-1.38.2-2.1.src.rpm
Packager: http://bugs.opensuse.org
Url: https://www.gnome.org/projects/NetworkManager/
Summary: Automatically configure NetworkManager in cloud
Installs a nm-cloud-setup tool that can automatically configure
NetworkManager in cloud setups. Currently only EC2 is supported.
This tool is still experimental.

Provides

Requires

License

GPL-2.0-or-later AND LGPL-2.1-or-later

Changelog

* Fri Jun 24 2022 Yifan Jiang <yfjiang@suse.com>
  - Bring back /sbin/netconfig as build option since the netconfig
    in SLE is not ready for usrmerge.
* Fri Jun 17 2022 Bjørn Lie <bjorn.lie@gmail.com>
  - Update to version 1.38.2:
    + Fix race condition with pppd that caused failures when
      activating PPPoE connections.
    + Unbreak DHCPv6 over PPP.
    + Don't ignore IPv6 DNS servers received from PPP.
    + Fix crash while checking WEP capability of Wi-Fi interfaces.
    + Ensure DHCP is restarted every time the link goes up.
    + Fix struct alignment issues seen on some architectures.
    + Various other bugfixes and improvements.
* Tue May 24 2022 Dominique Leuenberger <dimstar@opensuse.org>
  - Fold NetworkManager-wifi back into the main package: The dep
    chain is not really different and it causes too many problems for
    users having that split. Not worth the pain (boo#1199710,
    boo#1199706).
  - As a consequence, also drop the recommends fro the main package
    to -wifi.
* Mon May 16 2022 Dominique Leuenberger <dimstar@opensuse.org>
  - Update to version 1.38.0:
    + Add support for route type "throw".
    + Fix bug setting priority for IP addresses.
    + Static IPv6 addresses from "ipv6.addresses" are now preferred
      over addresses from DHCPv6, which are preferred over addresses
      from autoconf. This affects IPv6 source address selection, if
      the rules from RFC 6724, section 5 don't give a exhaustive
      match.
    + Static IPv6 addresses from "ipv6.addresses" are now interpreted
      with first address being preferred. Their order got inverted.
      This is now consistent with IPv4.
    + Wi-Fi hotspots will use a (stable) random channel number unless
      one is chosen manually.
    + Don't use unsupported SAE/WPA3 mode for AP mode.
    + NetworkManager will no longer advertise frequencies as
      supported when they're disallowed in configured regulatory
      domain.
    + Attempt to connect to WEP-encrypted Wi-Fi network will now fail
      gracefully with a recent version of wpa_supplicant when built
      without WEP support. As long as wpa_supplicant supports WEP,
      NetworkManager will continue to work.
    + Disable WPA3 transition mode for wifi.key-mgmt=wpa-psk if the
      NIC does not support PMF. This is known to cause problems in
      some setups. It is still possible to explicitly configure
      wifi.key-mgmt=sae for WPA3.
    + Add new dummy crypto backend "null" that does nothing.
      NetworkManager uses the crypto library when handling
      certificates for 802.1x profiles.
    + Veth devices with name "eth*" are now managed by default via
      the udev rule. This is to support managing the network in LXD
      containers.
    + The hostname received from DHCP is now shortened to the first
      dot (or to 64 characters, whatever comes first) if it's too
      long.
    + As the insecure WEP encryption for Wi-Fi network is phased out,
      nmcli now discourages its use when activating or modifying a
      profile.
    + Fix connectivity checks in case the check endpoint address
      resolves to multiple addresses.
    + Workaround libcurl blocking NetworkManager while resolving DNS
      names.
    + nmcli: indicate missing Wi-Fi hardware when showing rfkill
      setting.
    + nmcli: add connection migrate command to move a profile to a
      specified settings plugin. This allows to convert profiles in
      the deprecated ifcfg-rh format to keyfile.
    + Set "src" attribute for routes from DHCPv4 to the leased
      address. This helps with source address selection.
    + Various bugfixes and internal improvements.
    + Updated translations.
  - Recommend NetworkNanager-wifi from the main package: after the
    split, there is currently nothing pulling in NM-wifi. Preferably
    this would happen based on wifi chips prsence, but that is not
    yet done (boo#1199550).
* Thu Apr 14 2022 Jonathan Kang <songchuan.kang@suse.com>
  - Modify NetworkManager.spec: Split into a few small subpackages
    (bsc#1198128).
* Fri Apr 01 2022 Thorsten Kukuk <kukuk@suse.com>
  - Install nfs dispatcher script in /usr/lib/NetworkManager, not /etc
* Tue Mar 22 2022 Bjørn Lie <bjorn.lie@gmail.com>
  - Update to version 1.36.4:
    + The internal DHCPv4 client now discards NAKs packets coming
      from servers different from the one that sent the offer.
    + Fix activation of PPPoE connections with "pppoe.parent" unset.
    + Fix potential libnm crash when the client object initialization
      gets canceled.
    + Other various fixes and improvements.
* Wed Mar 16 2022 Frederic Crozat <fcrozat@suse.com>
  - Do not requires dhcp-client, NM is using its internal client
    by default for a long time now.
  - Convert iproute2 and iputils requires to recommends, they
    should not be hard requires.
* Mon Mar 07 2022 Bjørn Lie <bjorn.lie@gmail.com>
  - Update to version 1.36.2:
    + When the list of plugins is not specified via "main.plugins" in
      NetworkManager.conf and no build-time default is set with
      "--with-config-plugins-default" configure argument, now all
      known plugins found in the plugin directory are loaded (and the
      built-in "keyfile" plugin is preferred over others).
    + Preserve external ports during checkpoint rollback.
    + Fix removal of ovsdb entry when an OVS interface goes away.
    + Fix DNS configuration for WWAN connections.
* Thu Feb 24 2022 Bjørn Lie <bjorn.lie@gmail.com>
  - Update to version 1.36.0:
    + The handling of Layer 3 configurations has been substantially
      reworked. While this is mostly internal change, it results in
      more robust behavior when addressing information from multiple
      sources (DHCP, manually configured, VPN) need to be applied
      simultaneously. Overall performance and memory use have also
      slightly improved.
    + Manually configured addresses can no longer expire even if the
      same addresses are also obtained dynamically.
    + Code for systemd-based DHCP and DHCPv6 clients has been updated
      from upstream.
    + NTP servers obtained via DHCPv6 are now exposed on the DBus
      API, visible in nmcli and available for use by dispatcher
      scripts.
    + 5G NR (New Radio) modems are now supported.
    + The "rd.znet_ifnames" kernel command line option is now honored
      on network bootups on an IBM s390 platform.
    + Wi-Fi P2P support does now work with the IWD backend, in
      addition to wpa_supplicant backend.
    + Support for special route types have been added: "prohibit",
      "blackhole" and "unreachable".
    + Routes managed by routing daemons are now ignored. This is done
      to address a performance bottleneck on specialized routers.
    + Handling of IP addressing and routing information is now
      slightly more efficient and uses less memory. This is apparent
      on systems with large amount of IP configuration information.
    + It is now possible to start NetworkManager without root user
      privileges. This is experimental doesn't necessarily result in
      a working daemon. NetworkManager service already drops many of
      capabilities available to the root user.
    + WPA3 Wi-FI network security have been improved by enabling new
      H2E (hash to element) method for generating SAE password
      element.
    + It is now possible to select the default Wi-Fi backend
      (wpa_supplicant or IWD) at build-time.
    + Replies from broken DHCP servers that send duplicate address or
      mask options are now handled gracefully.
    + Bridge support has gained the possibility of turning off MAC
      ageing.
    + "configure-and-quit" mode and nm-iface-helper have been
      removed.
    + A number of bugs that could cause NetworkManager to crash in
      rare conditions have been fixed.
  - Drop pkgconfig(libteam) BuildRequires and stop passing
    teamdctl=true to meson: No longer build teamdctl support.
  - Drop patches fixed upstream:
    + 4685651e7671e064b911a3a05f096908e5ef0580.patch
    + 471e987add98b36520ece72ee493176fc7bc863c.patch
    + 6329f1db5ac75ee3b7d2f7ce062e951a598625fe.patch
    + 634e023e72d4729788a022ea1fae665af28d1b0f.patch
    + aadf0fb64f491f94b2771058621dc140c562b62b.patch
  - Drop nm-dhcp-use-valid-lease-on-timeout.patch: Patch was rejected
    upstream.
  - Rebase patches with quilt.
* Mon Feb 21 2022 Bjørn Lie <bjorn.lie@gmail.com>
  - Add upstream bug fix patches:
    + 4685651e7671e064b911a3a05f096908e5ef0580.patch: glib-aux: fix
      nm_ref_string_equal_str() Fix comparison with a NULL string
    + 6329f1db5ac75ee3b7d2f7ce062e951a598625fe.patch: libnm/tests:
      fix maybe-uninitialized warning in "test-setting"
    + aadf0fb64f491f94b2771058621dc140c562b62b.patch: libnm/tests:
      fix maybe-uninitialized warning in "test-libnmc-setting"
    + 471e987add98b36520ece72ee493176fc7bc863c.patch: device:
      initialize nm_auto variable in _ethtool_features_reset()
    + 634e023e72d4729788a022ea1fae665af28d1b0f.patch: glib-aux:
      workaround maybe-uninitialized warning with LTO in
      nm_uuid_generate_from_string_str()
* Fri Feb 18 2022 Callum Farmer <gmbr3@opensuse.org>
  - Use meson LTO setup as NM makes changes to CFLAGS
* Wed Jan 26 2022 Luciano Santos <luc14n0@opensuse.org>
  - Packaging additions with Autotools replacement:
    + Add Meson build requirement and replace Automake macros with
      Meson equivalent ones as autotools will be deprecated in the
      future.
    + Options passed to Meson to mimmic our default preferences:
      systemdsystemunitdir=%{_unitdir}, udev_dir=%{_udevdir},
      dbus_conf_dir=%{_dbusconfdir}, iptables=%{_sbindir}/iptables,
      dnsmasq=%{_sbindir}/dnsmasq, dnssec_trigger=%{_libexecdir}\
      /dnssec-trigger-script, dist_version=%{version},
      polkit_agent_helper_1=%{_libexecdir}/polkit-1\
      /polkit-agent-helper-1, hostname_persist=suse, switchable
      libaudit=%{libaudit_meson_opt}, iwd=true, pppd=%{_sbindir}\
      /pppd, pppd_plugin_dir=%{_pppddir}, nm_cloud_setup=true,
      bluez5_dun=true, netconfig=%{_sbindir}/netconfig,
      dhclient=%{_sbindir}/dhclient, docs=true, switchable
      tests=%{tests_meson_opt}, more_asserts=0, more_logging=false,
      qt=false, and switchable teamdctl=true (teamctl is about to be
      deprecated).
    + Add conditionalized audit pkgconfig module build requirement to
      allow easier feature testing, and pass
      'yes-disabled-by-default' to 'libaudit' Meson option. As an
      observation: Meson defaults passing 'yes' to this feature.
    + Add explicit c++_compiler build requirement to avoid build
      abortion.
    + Add explicit libselinux pkgconfig module build requirement
      checked by Meson and was already being pulled in by some other
      package.
    + Add polkit-gobject-1 pkgconfig module build requirement checked
      by Meson and needed for user auth-polkit support.
    + Add mobile-broadband-provider-info pkgconfig module build
      requirement checked by Meson and needed for ModemManager1
      interface support.
    + Add sed command to fix server.conf config file location from
      defaultdocdir/NetworkManager/examples to
      defaultdocdir/NetworkManager.
    + Add useful %{_pppddir} and %{_dbusconfdir} macros to spec file,
      while dropping no longed needed pppddir shell variable
      definition and 'test -n "$pppddir" || exit 1' construct.
    + Add "< 1.21" version to libnm-glib-vpn1, libnm-glib4, and
      libnm-util2 < 1.21 to main package's Obsoletes tags, following
      packaging good practices to avoid future unwated behavior
      regarding versioning schemes.
    + Replace %version macro with hardcoded "0.9.1" version to the
      devel subpackage's %name-doc Obsoletes tag following packaging
      good practices to avoid future unwanted behaviors regarding
      versioning schemes (the doc subpackage was merged with the
      devel one in the 0.9.0 release).
    + Pass "%{?no_lang_C}" to %find_lang macro to avoid stripping
      any English translations (the default language) from main
      package.
  - Packaging deletions with Autotools replacement:
    + Remove data/server.conf from %doc macro in files section as it
      no longer works with Meson.
    + Remove "rm" command on server.conf file following sed command
      addition to fix the right location of the file.
    + Remove no longer useful conditional build abortion depending
      whether or not netconfig support was found
      'grep "with_netconfig='no'" config.log' since this file isn't
      generated by Meson.
    + Remove no longer needed "find" command for GNU Libtool LA files
      deletion.
    + Drop no longer needed libtool build requirement as Meson does
      not use it.
    + Drop redundant sysconfig-netconfig build requirement as it does
      not add anything to the build anymore.
    + Drop comment about suse-release build requirement not being
      needed anymore, it's been deprecated for almost a decade now.
    + Drop setBadness for 'dbus-file-unauthorized' in the rpmlintrc:
      the new dbus file has been whitelisted already (bsc#1194799).
* Thu Jan 20 2022 Dominique Leuenberger <dimstar@opensuse.org>
  - Split out NetworkManager-pppoe, needed to configure regular PPPoE
    connections (Not very common, as most users have PPPoE routers
    for the DSL connections).
* Fri Jan 14 2022 Bjørn Lie <bjorn.lie@gmail.com>
  - Update to version 1.34.0:
    + initrd: wait for both IPv4 and IPv6 with "ip=dhcp,dhcp6"
    + core: better handle sd-resolved errors when resolving hostnames
    + nmcli: fix import WireGuard profile with DNS domain and address
      family disabled
    + ndisc: send router solicitations before expiry
    + policy: send earlier the ip configs to the DNS manager
    + core: support linking with LLD 13
    + wireguard: importing wg-quick configuration files with nmcli
      no longer sets a negative, exclusive "dns-priority". This plays
      better with common split DNS setups that use systemd-resolved.
      Adjust the "dns-priority" to your liking after import yourself.
    + NetworkManager no longer listens for netlink events for traffic
      control objects (qdiscs and filters).
    + core: add internal nm-priv-helper service for separating
      privileges and have a way to drop capabilities from
      NetworkManager daemon.
    + bond: add support for setting queue-id of bond port.
    + dns: support configuring DNS over TLS (DoT) with
      systemd-resolved.
    + nmtui: add support for WireGuard profiles.
    + nmcli: add aliases `nmcli device up|down` beside
      connect|disconnect.
    + conscious language: Deprecate 'Device.Slaves' D-Bus property in
      favor of new 'Device.Ports' property. Depracate
      'nm_device_*_get_slaves()' in favor of 'nm_device_get_ports()'
      in libnm.
    + nmcli: invoking nmcli command without arguments will now show
      'default' instead of null address in route4 or route6 section.
  - Refresh patches with quilt.
  - Replace addFilter("suse-branding-unversioned-requires*") from
    rpmlintrc, with the current branding-requires-unversioned.
  - Update our Supplements to current standard.
  - Add the new internal nm-priv-helper.service to pre(un)/post(un)
    handling.
* Wed Sep 22 2021 Bjørn Lie <bjorn.lie@gmail.com>
  - Update to version 1.32.12:
    + Fix wrong order of addresses when restarting NetworkManager.
    + Preserve the IPv6 ff00::/8 route added by kernel in the local
      table, necessary for multicast communication.
    + Fix emitting the signal for changed metered status of devices.
    + Fix applying the ethtool autonegotiation and speed settings.
    + initrd: fix crash parsing plain '=' without key.
    + cloud-setup: use suppress_prefixlength rule to honor
      non-default-routes in the main table.
* Wed Sep 22 2021 Jonathan Kang <songchuan.kang@suse.com>
  - Drop nm-add-CAP_CHOWN-capability.patch: This solution was denied
    by upstream maintainers.
* Tue Sep 14 2021 Stanislav Brabec <sbrabec@suse.com>
  - Remove obsolete translation-update-upstream support
    (jsc#SLE-21105).
* Thu Aug 19 2021 Bjørn Lie <bjorn.lie@gmail.com>
  - Update to version 1.32.10:
    + core: fix the order of IPv6 addresses changing on service
      restart.
    + initrd: add command line option to configure link
      autonegotiation and speed.
    + ifcfg-rh:
    - fix crash when parsing invalid DNS address.
    - extend ifup/ifdown scripts to work with connection profile
      names.
    + udev: also react to "move" (and "change") udev actions in our
      rules.
  - Changes from version 1.32.8:
    + firewalld: configure zones on "Reloaded" signal.
    + core: fix wrong MTU for bridge interfaces.
    + cloud-setup: fix gateway address for Aliyun cloud.
* Wed Jul 28 2021 Bjørn Lie <bjorn.lie@gmail.com>
  - Update to version 1.32.6:
    + core:
    - Fix adding stale local routes when address changes.
    - Introduce "allowed-connections" option to disallow profiles
      on a device. This allows to filter out profiles that
      originate from initrd.
    - Introduce "keep-configuration" device option to forcefully
      activate a profile on start.
    + initrd:
    - Tag generated profiles with origin in user data.
    - Add "ib.pkey=" command line option.
    + dhcp: Handle filename/bootfile_name DHCP option and write it to
      device state file for initrd/kickstart.
* Mon Jul 26 2021 Callum Farmer <gmbr3@opensuse.org>
  - Add libnm0 to baselibs.conf to be used by 64bit Steam
* Tue Jul 20 2021 Bjørn Lie <bjorn.lie@gmail.com>
  - Update to version 1.32.4:
    + core:
    - Remove stale entries from "seen-bssids" and "timestamp" files
      in "/var/lib/NetworkManager".
    - Add ipv[46].required-timeout option to wait for IP
      configuration while activating.
    - Send ARP announcements when there is carrier.
    - Start DHCPv6 when a prefix delegation is needed for shared
      mode.
    + bond: support the peer_notif_delay option.
    + firewall: fix nftables backend to create "ip" table for IPv4
      only.
    + initrd: set required-timeout of 20 seconds for default IPv4
      configuration to opportunistically wait for IPv4.
    + ifcfg:
    - Log warning about invalid keys in ifcfg files.
    - Reject non-UTF-8 from ifcfg files.
    + nmcli: show DNS SEARCH field in device information.
    + cloud-setup: add support for Aliyun cloud.
* Wed Jun 30 2021 Bjørn Lie <bjorn.lie@gmail.com>
  - Update to version 1.32.2 (CVE-2020-13529):
    + hostname: prefer IPv4 addresses for reverse DNS lookup.
    + dhcp: ignore unauthenticated FORCERENEW messages with internal,
      systemd-based DHCPv4 plugin (CVE-2020-13529). This plugin is
      not used, unless the undocumented dhcp=systemd option was set.
    + cloud-setup: preserve IP addresses, routes and rules from
      currently active connection profile.
    + Various bugfixes and performance improvements.
* Wed Jun 16 2021 Bjørn Lie <bjorn.lie@gmail.com>
  - Update to version 1.32.0:
    + Now NetworkManager uses systemd-resolved API to lookup the
      system hostname via reverse DNS. If systemd-resolved is not
      available, a 'nm-daemon-helper' binary is spawned to perform
      the lookup using the 'dns' NSS module.
  - Rebase patches.
* Tue May 18 2021 Jonathan Kang <songchuan.kang@suse.com>
  - Add nm-add-CAP_CHOWN-capability.patch: Add CAP_CHOWN to
    CapabilityBoundingSet to make teamd work properly
    (glfd#NetworkManager/NetworkManager!860, bsc#1185424).
* Fri May 14 2021 Dominique Leuenberger <dimstar@opensuse.org>
  - Drop networkmanager-obs-net.patch: the patch needs a full rework.
  - Drop networkmanager-checks-po.patch: as it was supposed to fix
    something introduced by another patch which we still carry, yet
    we can live with this patch disabled, I'd infer this patch is not
    nescessary.
* Tue Apr 20 2021 Dominique Leuenberger <dimstar@opensuse.org>
  - Update to version 1.30.4:
    + Fix crash evaluating match setting properties (CVE-2021-20297).
    + Fix leak of local route added by NetworkManager for configured
      addresses.
    + Fix name of the device autoconnect D-Bus property.
    + Multiple bugfixes in the initrd generator.
    + Various minor bugfixes.
* Sat Apr 17 2021 Dominique Leuenberger <dimstar@opensuse.org>
  - Update to version 1.30.2:
    + Increase the limit of open file descriptors in
      NetworkManager.service.
    + Fix hostname lookup via DNS when resolv.conf is managed by
      systemd-resolved.
    + Enable WPA3 for Wi-Fi connections with key_mgmt=WPA-PSK.
    + Fix crash with the IWD Wi-Fi backend.
    + Avoid logging warning when setting bond option
      "ad_actor_system=00:00:00:00:00:00".
    + Update SpecificObject D-Bus property of ActiveConnection after
      WiFi roaming.
    + Multiple bugfixes in the initrd generator.
    + Various minor bugfixes.
  - Drop NM-restore-MAC-on-release-only-when-cloned.patch: fixed
    upstream.
* Thu Apr 15 2021 Jonathan Kang <songchuan.kang@suse.com>
  - Modified NetworkManager.conf: Use dhclient as the default dhcp
    client(bsc#1183202).
* Fri Apr 09 2021 Jonathan Kang <songchuan.kang@suse.com>
  - Add nm-dhcp-use-valid-lease-on-timeout.patch: Support valid lease
    file on dhcp timeout(glfd#NetworkManager/NetworkManager!811,
    bsc#1183202).
  - Drop nm-fix-dhcp-client-timeout.patch: Replace by the patch
    immediately above.
* Fri Apr 09 2021 Jonathan Kang <songchuan.kang@suse.com>
  - Add nm-fix-dhcp-client-timeout.patch: Better handle dhclient's
    timeout so that a recorded lease can be used when dhcp server
    is down(glfo#NetworkManager/NetworkManager!811, bsc#1183202).
  - Modified NetworkManager.conf: Use dhclient as the default dhcp
    client(glfo#NetworkManager/NetworkManager!811, bsc#1183202).
* Thu Mar 25 2021 Jonathan Kang <songchuan.kang@suse.com>
  - Add NM-restore-MAC-on-release-only-when-cloned.patch: bond:
    restore MAC on release only when there is a cloned MAC address
    (glfo#NetworkManager/NetworkManager!775, bsc#1183967).
* Thu Feb 18 2021 Dominique Leuenberger <dimstar@opensuse.org>
  - Update to version 1.30.0:
    + Increase timeout of NetworkManager-wait-online.service to 60
      seconds.
    + Add "ipv4.dhcp-client-id=ipv6-duid" option for RFC4361.
    + The dhcpcd plugin now requires a minimum version of
      dhcpcd-9.3.3 with the --noconfigure option. Using an older
      version will cause dhcpcd to exit with a status code of 1.
    + Support building against musl libc.
    + Support new ethtool offload features.
    + Add support for WPA3 Enterprise Suite-B 192 bit mode.
    + Add support for handling Veth devices.
    + New hostname settings for controlling configuring the hostname
      from reverse DNS lookup and from DHCP.
    + OVS: support configuring external-ids.
    + libnm: nm_setting_bond_add_option() no longer validates the
      option that is set. Instead, use nm_connection_verify() to
      validate the profile.
    + libnm: add support for reading/writing keyfile format. This
      required to relicense previously GPL-2.0+ code as LGPL-2.1+
      with the agreement of the copyright holders.
    + initrd:
    - Support for rd.net.timeout.carrier option.
    - Support new ip method "link6" for IPv6 link-local only.
    + build: new configure option to set path to
      "polkit-agent-helper-1".
    + Many bugfixes and improvements.
    + Updated translations.
  - Change License to GPL-2.0-or-later and LGPL-2.1-or-later,
    following upstream.
  - Replace %systemd_requires with %systemd_ordering.
* Mon Jan 04 2021 Hans-Peter Jansen <hpj@urpla.net>
  - Second attempt to exclude systemd.automount from nfs processing:
    fix boo#1116625
* Sun Dec 06 2020 Bjørn Lie <bjorn.lie@gmail.com>
  - Update to version 1.28.0:
    + Change the behavior of nm-initrd-generator so that the
      'ip=off|none' kernel cmdline argument actually generates a
      connection which disables both ipv4 and ipv6. Previously the
      generated connection would disable ipv4 but ipv6 would be set
      to the 'auto' method.
* Fri Nov 27 2020 Fabian Vogt <fvogt@suse.com>
  - Provide service(network) and sysvinit(network) to be an alternative
    to wicked-service
* Tue Nov 24 2020 Bjørn Lie <bjorn.lie@gmail.com>
  - Pass --enable-lto to configure, build with LTO enabled.
  - Stop passing --enable-json-validation to configure, no longer
    needed, nor recognized.
* Fri Oct 30 2020 Hans-Peter Jansen <hpj@urpla.net>
  - Exclude systemd.automount from nfs processing: fix boo#1116625
    as suggested from Neil Brown
* Wed Oct 21 2020 Dominique Leuenberger <dimstar@opensuse.org>
  - Update to version 1.27.91:
    + Change the default DNS priority for VPNs from 50 to -50. This
      is a change in behavior and means that when connecting to a VPN
      with the default route, DNS queries will never leak to local
      resolvers. To restore the old behavior, set the DNS priority of
      the connection to 50.
    + The initrd generator now supports creating Infiniband
      connections.
* Fri Oct 16 2020 Dominique Leuenberger <dimstar@opensuse.org>
  - Rebase patches:
    + 0001-Coerce-connectivity-LIMITED-to-NONE-when-device-is-d.patch
    + NetworkManager-1.10.6-netconfig.patch
    + nm-dont-overwrite-resolv-conf.patch
* Fri Oct 16 2020 Bjørn Lie <bjorn.lie@gmail.com>
  - Update to version 1.27.90:
    + Introduce a new "rc-manager=auto" setting and make it the
      default, unless a different default is chosen at compile time.
      This mode tries to detect "systemd-resolved", "resolvconf", and
      "netconfig".
  - Disable patches that needs rebase or dropping:
    + nm-dont-overwrite-resolv-conf.patch
    + NetworkManager-1.10.6-netconfig.patch
    + 0001-Coerce-connectivity-LIMITED-to-NONE-when-device-is-d.patch
* Fri Oct 16 2020 dimstar@opensuse.org
  - Update to version 1.27.3:
    + Introduce new "rc-manager=auto" setting and make it the
      default, unless a different default is chosen at compile time.
      This mode tries to detect "systemd-resolved", "resolvconf",
      and "netconfig" and chooses the mode that seems most suitable
      depending on build setting and runtime detection.
      "resolvconf" and "netconfig" are only considered iff
      NetworkManager was built with the respective options enabled.
  - Rebase nm-dont-overwrite-resolv-conf.patch and
    0001-Coerce-connectivity-LIMITED-to-NONE-when-device-is-d.patch.
* Thu Oct 15 2020 Bjørn Lie <bjorn.lie@gmail.com>
  - Update to version 1.26.4:
    + Add support for the DHCPv4 vendor class identifier option.
    + The initrd generator now supports specifying interfaces by MAC
      address.
    + Automatically add the wildcard DNS domain to VPNs with
      never-default=no and no domains.
    + Allow setting bond "primary" option with modes "tlb" and "alb".
    + Fix peer group tracking of Wi-Fi P2P connections.
    + Fix autoactivating virtual devices after a failure.
* Thu Aug 20 2020 Bjørn Lie <bjorn.lie@gmail.com>
  - Update to version 1.26.2:
    + build: various fixes for LTO.
    + dhcp6: export and handle the DHCPv6 FQDN option.
    + core: fix reapply for bond options.
    + core: improve "connection.wait-device-timeout" to handle
      matching devices not only by interface name and fix race.
    + libnm,core: support "clsact" qdisc.
    + dhcp4: fix bug in internal DHCP client on big endian systems.
* Thu Aug 13 2020 Dominique Leuenberger <dimstar@opensuse.org>
  - Own the two empty directories pre-up.d and pre-down.d in
    /usr/lib/NetworkManager/dispatcher.d (boo#1173713).
* Mon Jul 13 2020 Bjørn Lie <bjorn.lie@gmail.com>
  - Update to version 1.26.0:
    + Add a new build option 'firewalld-zone'; when enabled,
      NetworkManager installs a firewalld zone for connection sharing
      and puts interfaces using IPv4 or IPv6 shared mode in this zone
      during activation. The option is enabled by default.
      Note that NetworkManager still calls to iptables to enable
      masquerading and open needed ports for DHCP and DNS. The new
      option is useful on systems using firewalld with the nftables
      backend, where the iptables rules would not be sufficient.
    + Extend the syntax for 'match' setting properties with '|', '&',
      '!' and '\\'.
    + Add MUD URL property for connection profiles (RFC 8520) and set
      it for DHCP and DHCPv6 requests.
    + Expose raw LLDP message on D-Bus and the MUD usage description
      URL.
    + ifcfg-rh: handle "802-1x.{,phase2-}ca-path". Otherwise setting
      this property silently fails and a profile might accidentally
      not perform any authentication (CVE-2020-10754).
    + ifcfg-rh: handle 802-1x.pin properties.
    + ethernet: reset original autonegotiation/speed/duplex settings
      when deactivating device.
    + Support ethtool coalesce and ring options.
    + Allow team connections to work without D-Bus (e.g. in the
      initrd).
    + Wi-Fi profiles now also autoconnect if all previous activation
      attempts failed. This means, an initial failure to autoconnect
      to the network will no longer block the automatism. A side
      effect is that existing Wi-Fi profiles which previously were
      blocked may now start to autoconnect.
    + NetworkManager now supports "local" type routes beside
      "unicast".
    + Introduce new manual pages nm-settings-dbus and
      nm-settings-nmcli.
    + Mark externally managed devices and profiles on D-Bus.
    + Highlight externally managed devices in nmcli.
    + Add support for a number of bridge options.
    + Add match for device path, driver and kernel command line for
      connection profiles.
    + Fix support for OVS patch interfaces.
    + Support more tc qdiscs: tbf and sfq.
    + Add new provider in nm-cloud-setup for Google Cloud Platform
      which automatically detects and configures the host to receive
      traffic from internal load balancers.
* Thu Jul 02 2020 Jonathan Kang <songchuan.kang@suse.com>
  - Rebase nm-add-CAP_SYS_ADMIN-permission.patch.
* Fri May 29 2020 Bjørn Lie <bjorn.lie@gmail.com>
  - Update to version 1.24.2:
    + Add a new build option 'firewalld-zone'; when enabled,
      NetworkManager installs a firewalld zone for connection sharing
      and puts interfaces using IPv4 or IPv6 shared mode in this zone
      during activation. The option is enabled by default. Note that
      NetworkManager still calls to iptables to enable masquerading
      and open needed ports for DHCP and DNS. The new option is
      useful on systems using firewalld with the nftables backend,
      where the iptables rules would not be sufficient.
    + ifcfg-rh:
    - Handle "802-1x.{,phase2-}ca-path". Otherwise setting this
      property silently fails and a profile might accidentally not
      perform any authentication (CVE-2020-10754).
    - Handle 802-1x.pin properties.
    + platform: fix crash detecting device type from netlink.
    + ip-tunnel: only set cloned-mac-address for layer 2 tunnels.
    + Fixes for sanitizer build and valgrind.
    + Various other bugfixes.
* Fri May 08 2020 Bjørn Lie <bjorn.lie@gmail.com>
  - Update to version 1.24.0:
    + Add support for virtual routing and forwarding (VRF)
      interfaces.
    + Add support for Opportunistic Wireless Encryption mode (OWE)
      for Wi-Fi networks.
    + Add support for 31-bit prefixes on IPv4 point-to-point links
      according to RFC 3021.
    + Drop dependencies for libpolkit-agent-1 and
      libpolkit-gobject-1.
    + nmcli:
    - support setting removal via new command
      `nmcli connection modify $CON_NAME remove $setting`.
    - support backslash escape sequences for "vpn.data",
      "vpn.secrets", "bond.options", and "ethernet.s390-options".
    + bridge: support new options "bridge.multicast-querier",
      "bridge.multicast-query-use-ifaddr", "bridge.multicast-router",
      "bridge.vlan-stats-enabled", "bridge.vlan-protocol",
      "bridge.group-address".
    + IPv6 SLAAC: add support for "ipv6.ra-timeout" setting
    + IPv6 DHCP: add support for "ipv6.dhcp-timeout" setting
    + WWAN: NetworkManager now detects if a PIN-protected SIM card
      has been externally unlocked and automatically tries to
      activate a suitable connection on the modem.
    + OVS:
    - add support for changing MTU of OVS interfaces.
    - remove length limitation for OVS Bridge, Patches and
      Interfaces (only Patch types) names.
    + VPN: accept empty values for VPN data items and secrets.
    + All nm-devices now expose the 'HwAddress' property via D-Bus.
    + Slave devices now do not get created/activated if master is
      missing.
    + Fixed multiple issues in the internal "nettools" DHCP client.
    + Export NM_CAPABILITY_OVS capability on D-Bus and in libnm to
      indicate that the OVS plugin is loaded.
    + Fixes for importing WireGuard profiles in nmcli and better
      handle configurations that enable ip4-auto-default-route with
      an explicit gateway.
    + Various bug fixes and improvements.
  - Rebase applied patches with quilt.
  - Drop pkgconfig(polkit-agent-1) BuildRequires: No longer needed.
* Fri May 01 2020 Dominique Leuenberger <dimstar@opensuse.org>
  - Prepare the directory structure for the VPN modules. This is the
    directory we instruct VPN services to be installed to as part of
    pkg-config  --variable vpnservicedir libnm. It is this fair that
    we also provide the directory layout.
  - Install RPM macros (macros.NetworkManager) as part of the -devel
    package for plugins to get the relevant variables to consume.
* Thu Mar 12 2020 Bjørn Lie <bjorn.lie@gmail.com>
  - Update to version 1.22.10:
    + core: periodically cleanup stale device state files from /run.
    + dhcp: fix crash in nettools client.
    + bond: fixed the validation of the miimon option.
    + Various minor bug fixes and improvements.
* Wed Mar 11 2020 Dr. Werner Fink <werner@suse.de>
  - Modify nfs script (boo#1164642)
    * Also mount nfs4 shares
    * Ignore nfs or nfs4 shares in case if the noauto option is set
* Tue Feb 18 2020 Bjørn Lie <bjorn.lie@gmail.com>
  - Update to version 1.22.8:
    + Added configuration option to customize IPv6 RA timeout.
    + Internal DHCP client will now request a lease renewal using the
      previously obtained IP address when expired.
    + Removed length limitation for OVS Bridge, Patches and
      Interfaces (only Patch types) names.
    + Fixed initialization of 'secs' DHCP header field, this caused
      some DHCP relays to drop packets.
    + Fixed failure when creating team interfaces using 'nmstate'.
    + Various bug fixes and improvements.
* Wed Feb 05 2020 Michael Gorse <mgorse@suse.com>
  - Add -fcommon to CFLAGS. This is currently being done upstream
    (boo#1160381).
* Fri Jan 31 2020 Bjørn Lie <bjorn.lie@gmail.com>
  - Update to version 1.22.6:
    + Various fixes for the internal DHCP client.
    + Slave devices now do not get created/activated if master is
      missing.
    + Fixed 'startup-complete' bug where NetworkManager would reach
      the network-online.target even when not all the connections had
      been tried.
    + Updated translations.
* Sat Jan 25 2020 Dominique Leuenberger <dimstar@opensuse.org>
  - No longer recommend -lang: supplements are in use
* Fri Jan 10 2020 Bjørn Lie <bjorn.lie@gmail.com>
  - Update to version 1.22.4:
    + Fix behavior of internal DHCP client when the server sends a
      NAK.
    + Support 31-bit prefixes on IPv4 point-to-point links according
      to RFC 3021.
    + Fix memory leak parsing RequestScan D-Bus method arguments.
* Wed Jan 08 2020 Lorenz Hüdepohl <dev@stellardeath.org>
  - Fix 'nfs' dispatcher script
    It was checking for an enabled unit 'nfs.service' - which does not
    exist (anymore?). Switched to a check for an enabled unit
    'nfs-client.target'
* Tue Dec 24 2019 Bjørn Lie <bjorn.lie@gmail.com>
  - Update to version 1.22.2:
    + Fix multiple issues in the internal DHCP client, including
      wrong parsing of search domains and classless routes options,
      and failures in obtaining and renewing the lease with certain
      server configurations.
    + Export NM_CAPABILITY_OVS capability on D-Bus and in libnm to
      indicate that the OVS plugin is loaded.
    + Fix libnm annotations for nm_sriov_vf_get_vlan_ids() to allow
      the usage of the function through GObject introspection.
* Tue Dec 17 2019 Bjørn Lie <bjorn.lie@gmail.com>
  - Update to version 1.22.0:
    + Drop support for BlueZ 4. BlueZ 5 was released in 2012 and
      should nowadays be available everywhere.
    + DHCP: switch "internal" DHCPv4 plugin from code based on
      systemd to use nettools' n-dhcp4 library.
    + Add support for "scope" attribute for IPv4 routes.
    + Add support for specifying IAID and FQDN flags for DHCP
      request.
    + Add a '802-1x.optional' property to consider the wired 802.1X
      authentication as optional.
    + Use the Network Cost Wi-Fi information element to determine
      metered device state.
    + Support main.auth-polkit=root-only setting to disable PolicyKit
      use and restrict authorization to root user.
    + core: declare "startup complete" when device reaches
      "connected" state, even if IP addressing methods did not yet
      fully complete. This changes behavior for unblocking
      "NetworkManager-wait-online.service", and
      "network-online.target" earlier. If this causes issues in your
      setup, you may need to configure "ipv4.may-fail=no" or
      "ipv6.may-fail=no", which delays reaching "connected" state for
      the address family accordingly.
    + libnm: hide NMObject and NMClient typedefs from header files.
      This prevents the user from subclassing these types and is an
      ABI change (in the unlikely case that a user was subclassing
      the types, which is no longer supported).
    + libnm: retire deprecated WiMAX API NMDeviceWimax and
      NMWimaxNsp. WiMAX support was removed from NetworkManager in
      version 1.2 (2016) and no such type instances would have been
      created by NMClient for a while now.
    + Deprecate synchronous API for D-Bus calls in libnm. We don't
      remove libnm API so you are free to continue using it. But
      tells you that using it might be a bad idea.
    + libnm: heavily internal rework NMClient. This slims down libnm
      and makes the implementation more efficient. NMClient should
      work now well with a separate GMainContext.
    + Add `nmcli general reload` subcommand to reload NetworkManager
      configuration and DNS settings.
    + nm-cloud-setup: add new tool for automatically configuring
      NetworkManager in cloud. This is still experimental and
      currently only EC2 and IPv4 is supported.
    + Add new NetworkManager logo to "contrib/art/logo".
    + Various bug fixes and improvements.
  - Disable networkmanager-checks-po.patch: Needs rebase.
  - Add new nm-cloud-setup.service to pre/post/preun/postun calls.
* Mon Nov 25 2019 Bjørn Lie <bjorn.lie@gmail.com>
  - Update to version 1.20.8:
    + Fix handling of system CA certificates in the ifcfg parser.
    + Handle ReachableTime and RetransTimer from IPv6 Router
      Advertisements.
    + Fixed setting of MTU according to its parent device for some
      device types.
    + Various fixes for the initramfs configuration genertor.
* Wed Nov 06 2019 Bjørn Lie <bjorn.lie@gmail.com>
  - Update to version 1.20.6:
    + Fix updating agent-owned VPN secrets.
    + Adjust IWD support to new D-Bus path of IWD 1.0.
    + Introduce an 'optional' property in the 802-1x setting to
      allow the activation to proceed in case of missing
      authenticator.
    + Fix ARP announcements for IP addresses configured on
      interfaces.
    + Use proper interface when adding s390 specific details in
      initrd generator.
    + Don't disable PMF on Wi-Fi connections using SAE.
    + Properly handle uint16 property types in libnm.
* Thu Oct 31 2019 Dominique Leuenberger <dimstar@opensuse.org>
  - Drop NetworkNanager-client recommends: this is no longer needed,
    as NM itself ships a frontend by now (nmtui). If a DE has a
    better way to manage NM (by means of applets or other way of
    integration) it is up to the DE to depend on the applets.
* Wed Oct 09 2019 Bjørn Lie <bjorn.lie@gmail.com>
  - Update to version 1.20.4:
    + Fix crash related to Wi-Fi-P2P.
    + Support rd.znet option in initrd generator to support s390.
    + Fix not creating default-wired-connection when a suitable
      profile exists which is not tied to the device by
      interface-name.
    + tui: support WPA3-Personal (SAE).
    + Fixes for OLPC Mesh Wi-Fi.
    + Various bug fixes. Notably, fix unit test and build issues.
  - Drop nm-fix-gtk-doc.patch: Fixed upstream.
* Wed Oct 09 2019 Bjørn Lie <bjorn.lie@gmail.com>
  - Add nm-fix-gtk-doc.patch: Fix build with gtk-doc 1.32 and newer.
* Wed Oct 09 2019 Bjørn Lie <bjorn.lie@gmail.com>
  - Update to version 1.20.2:
    + Don't ask wpa_supplicant to attempt to enable FT if the
      interface doesn't support it.
    + Various bug fixes and improvements.
    + Updated translations.
* Wed Oct 09 2019 Bjørn Lie <bjorn.lie@gmail.com>
  - Update to version 1.20.0:
    + The libnm-glib library, deprecated in favor of libnm since
      NetworkManager 1.0, and disabled by default since
      NetworkManager 1.12, has now been removed.
    + The DHCP client now defaults to "internal". The default can be
      overriden at build time by using the --with-config-dhcp-default
      option of the configure script or at run time by setting the
      main.dhcp option in the configuration file.
    + Added support for configuring fq_codel line discipline and
      mirred action.
    + Added a possibility for distributions to ship dispatcher
      scripts in /usr/lib.
    + Drop deprecated setting "main.monitor-connection-files" in
      NetworkManager.conf. This setting now has no more effect and
      was disabled by default for a long time. Instead, after
      changes, load files explicitly with `nmcli connection load` or
      `nmcli connection reload`.
    + Rework parsing team JSON config in libnm and stricter validate
      settings. With this, NetworkManager rejects settings that it
      considers invalid while still allowing setting arbitrary JSON
      config directly.
    + Drop ibft settings plugin. This functionality is now covered by
      using nm-initrd-generator from initrd to pre-generate in-memory
      profiles.
    + Support "suppress_prefixlength" attribute for policy routing
      rules.
    + This is what wg-quick uses for the "Improved Rule-based
      Routing" solution, and the user can now manually configure such
      policy routing rules.
    + Support "wireguard.ip4-auto-default-route" and
      "wireguard.ip6-auto-default-route". This automatically
      implements the "Improved Rule-based Routing" of wg-quick to
      help avoiding routing loops when setting the default-route on
      the WireGuard interface. Note that this is now enabled by
      default, so there is a change in behavior if your WireGuard
      connection profiles from before had a default-route (/0) in
      allowed-ips.
    + Rework implementation of settings plugins and how profiles are
      presisted to disk. This is a large internal refactoring of the
      settings plugins that allows to migrate a connection profile
      between plugins.
    + In-memory profiles are now only handled by keyfile plugin and
      will also be persisted to /run directory. This allows to
      restart NetworkManager without loosing these profiles and it
      provides a file-system based API for creating in-memory
      profiles.
    + Keyfile plugin now supports a read-only directory of profiles
      under directory "/usr/lib/NetworkManager/system-connections".
      Such profiles still can be modified and deleted via D-Bus,
      which results in writing profiles to /etc or /run that shadow
      the read-only files.
    + Add new D-Bus method AddConnection2() that allows to block
      autoconnect of the profile at the moment when creating the
      profile. Also add support for this API to libnm.
    + Add flag "no-reapply" to Update2() D-Bus method. Normally, when
      a connection profile gets modified, this only changes the
      profile itself. When the profile is currently activated on a
      device, then the device's configuration does not update before
      the profile is fully re-activated or Reapply on the device is
      called. There is an exception to this: the "connection.zone"
      and the "connection.metered" properties take effect
      immediately. The "no-reapply" flag allows suppressing to
      reapply any properties, so that no changes take effect
      automatically. The purpose is to really only modify the profile
      itself without changes to the runtime configuration of the
      device.
    + Add "ipv6.method=disabled" to disable IPv6 on a device, like
      also possible for IPv4. Until now, the users could only set
      "ipv6.method=ignore" which means the users are free to set IPv6
      related sysctl values themselves.
    + Added support for Wi-Fi Mesh network.
  - Stop passing --with-libnm-glib to configure, feature was dropped.
  - Drop sub-packages libnm-util2, libnm-glib4 and libnm-glib-vpn1
    and obsolete them from the main package (also in baselibs.conf).
  - Drop typelib-1_0-NetworkManager-1_0 and typelib-1_0-NMClient-1_0.
  - Rebase some patches with quilt.
  - Disable nm-add-CAP_SYS_ADMIN-permission.patch: Needs rework or
    possibly dropping as the ibft plugin is dropped.
  - Pass --with-iwd=yes to configure, build experimental IWD backend
    support. Not recommended for endusers, only for testers willing
    to take the risk of broken wifi with no support from distro.
* Wed Oct 09 2019 Bjørn Lie <bjorn.lie@gmail.com>
  - Update to version 1.18.4:
    + Improve handling of externally added policy routing rules and
      for rules that are taken over after a restart of NetworkManager
      service.
    + Fix taking over OVS devices after restart of NetworkManager.
    + Bugfix reapplying IP configuration while activating.
    + Allow reapplying Wi-Fi profile when seen-bssids changes.
    + Various other bugfixes for minor issues and memory leaks.
    + Various build and test fixes.
* Tue Jul 30 2019 Jonathan Kang <sckang@suse.com>
  - Update to version 1.18.2(bsc#1138213):
    + Add support for policy routing rules.
    + Add support for VLAN filtering for Linux bridge.
    + Support ieee-802-1 and ieee-802-3 LLDP TLVs.
    + Allow large MTU sizes for infiniband/IPoIB connection profiles.
    + Improve nmcli's handling of list options for connection properties.
    + Add compatibility with out-of-tree WireGuard module on 5.2 kernels
    + Fix parsing of BOOTIF= variables in initrd.
    + Accept numeric IPv4 prefix in place of a mask when parsing a command line
      in initrd.
    + Don't check connectivity of unconfigured devices.
    + Fix PKCS#12 handling in the ifcfg-rh plugin.
    + Avoid waiting for udev to see software devices created by NetworkManager.
    + Don't attempt to stop management daemon for Team devices created
      externally to NetworkManager.
    + Use FQDN for persistent hostname on Slackware.
    + Restore IPv6 configuration of a device when its link goes back up.
    + Fix management status of software devices on system suspend.
    + Make nmcli not print certificate blobs if --show-secrets is not used.
    + Fix MTU reapply.
  - Drop 0001-Update-connectivity-value-on-device-removal.patch:
    Fixed upstream.
* Tue Jun 11 2019 Jonathan Kang <sckang@suse.com>
  - Add nm-add-CAP_SYS_ADMIN-permission.patch: Add CAP_SYS_ADMIN
    which netconfig needs to call setdomainname (bsc#1129587).
* Wed May 29 2019 Bjørn Lie <bjorn.lie@gmail.com>
  - Update to version 1.16.2:
    + Use FQDN for persistent hostname on Slackware.
    + Fix wrong permissions of the /var/lib/NetworkManager/secret_key
      file.
    + Don't terminate teamd when assuming existing team connections.
    + Fix incorrect persistence of connections with EAP-TLS and a
      PKCS#12 certificate when using the ifcfg-rh plugin.
    + Fix reapply of the MTU property on devices.
    + Restore IPv6 configuration when the link goes up.
    + Fix build with sanitizers.
    + Other various bug fixes and improvements.
* Tue May 21 2019 Jonathan Kang <sckang@suse.com>
  - Avoid using "systemctl enable" in spec file (bsc#1038403).
* Fri May 17 2019 Jonathan Kang <sckang@suse.com>
  - Remove legacy checks which fixes bnc#803058 during distribution
    upgrade from 12.2 to 12.3 in .spec file.
* Thu Mar 28 2019 Christian Boltz <suse-beta@cboltz.de>
  - Fix systemd-network-config.patch which added lines starting with "+"
    to NetworkManager-wait-online.service
* Thu Mar 21 2019 Antonio Larrosa <alarrosa@suse.com>
  - Fix the connectivity value of devices which was set to LIMITED when
    the connectivity check fails. Now if the connectivity is being set
    to LIMITED but the device state is DISCONNECTED, then the value is
    coerced to NONE. Add patch submitted to
    upstream (boo#1103678, glfdo#NetworkManager/NetworkManager#138):
    * 0001-Coerce-connectivity-LIMITED-to-NONE-when-device-is-d.patch
  - Fix the global connectivity value which wasn't updated when a
    device was removed. Which is a problem if the device being removed
    is the one providing the connectivity. Add patch submitted to
    upstream (boo#1103678, glfdo#NetworkManager/NetworkManager#141):
    * 0001-Update-connectivity-value-on-device-removal.patch
* Mon Mar 18 2019 sckang@suse.com
  - Update to version 1.16.0:
    + Check connectivity per address family.
    + Support "main.systemd-resolved" to let NetworkManager configure
      DNS settings in systemd-resolved without making it the main DNS
      plugin of NetworkManager.
    + Write "/var/run/NetworkManager/no-stub-resolv.conf" with
      original nameservers. That is useful with caching DNS plugins
      like "systemd-resolved" or "dnsmasq" where
      "/var/run/NetworkManager/resolv.conf" refers to localhost.
    + Change default "ipv4.dhcp-client-id" setting for the internal
      DHCP plugin from "duid" to "mac". This is a change in behavior
      on upgrade when using the internal DHCP plugin (unless the
      default is overwritten in "NetworkManager.conf" or specified
      per connection profile).
    + Improve handling of DHCP router options with internal DHCP
      plugin. For one, accept multiple routers and add a
      default-route to each. On D-Bus expose the original DNS and
      NTP servers without cleaning up local nameservers.
    + Allow binding a connections lifetime to the DBus client that
      activated it.
    + Add support for establishing Wi-Fi Direct connections (Wi-Fi
      P2P).
    + Add support for WireGuard VPN tunnels to NetworkManager. D-Bus
      API and libnm support all options. nmcli supports creating and
      managing WireGuard profiles, with the exception of configuring
      and showing peers.
    + Add initrd generator to be used by dracut and use it as new way
      of handling iBFT.
    + Deprecated "plugins.monitor-connection-files" setting in
      NetworkManager.conf. This option will have no effect in future
      versions.
    + Add AP and Ad-hoc support for iwd Wi-Fi backend.
    + Warn about invalid settings in "NetworkManager.conf".
    + Support announcing "ANDROID_METERED" DHCP option for shared
      mode.
    + Support SAE authentication as used for 802.11s Meshing and
      WPA3-Personal.
    + NetworkManager is no longer installed as D-Bus activatable
      service.
    + Mark docker bridges as unmanaged via udev rule.
    + Add new PolicyKit permission
      "org.freedesktop.NetworkManager.wifi.scan" for controlling
      Wi-Fi scanning.
  - Rebase systemd-network-config.patch and
    nm-dont-overwrite-resolv-conf.patch.
  - Drop NetworkManager-1.12.2-docker-unmanaged.patch and
    NM-add-wifi-scan-polkit-rule.patch: Fixed upstream (bsc#1128560).
* Sun Mar 17 2019 Jan Engelhardt <jengelh@inai.de>
  - Do away with em dashes in summaries.
  - Combine %service_* calls to reduce generated boilerplate.
* Sun Feb 24 2019 bjorn.lie@gmail.com
  - Update to version 1.14.6:
    + Fix memory corruption in internal DHCPv6 client
      (CVE-2018-15688).
    + No longer limit number of search entires in resolv.conf to 6.
    + Support restricting NetworkManager.conf device configuration
      based on used DHCP plugin.
    + Add "${MAC}" specifier for connection.stable-id. This uses the
      current MAC address for seeding the stable generation of MAC
      address, DHCP client-id or IPv6 stable-privacy interface
      identifier.
    + Support special value "duid" for "ipv4.dhcp-client-id". This
      generates an RFC4361-compliant client-id like the internal DHCP
      client used to do by default. Previously, there was no explicit
      name for such a client-id and it was not usable with dhclient
      DHCP plugin. This also generates the same client-id as
      systemd-networkd does by default.
    + Support and use a new kind of secret-key in
      "/var/lib/NetworkManager/secret_key". The secret-key represents
      the identity of the machine that is used for various purposes
      like generating IPv6 stable privacy addesses. It is now
      combined with "/etc/machine-id" so that changing only the
      machine-id results in new identifiers. That matters for example
      when cloning a virtual machine. Previously, the user hard to
      prune NetworkManager's secret-key to get a new identity, now
      regenerating machine-id suffices. Secret-keys generated by
      earlier versions of NetworkManager are not affected and keep
      their previous behavior.
    + Fix the DHCP client-ids based on the MAC address of
      IPoIB/infiniband devices.
    + Fix restoring IP configuration after interface went down.
    + No longer let NetworkManager touch rp_filter setting. The
      rp_filter sysctl must now be set outside of NetworkManager
      according to the admin's preference. Note that a strict
      rp_filter may break valid use-cases and interacts badly with
      connectivity checking.
    + Various bug fixes and improvements.
* Thu Jan 31 2019 sckang@suse.com
  - Add NM-add-wifi-scan-polkit-rule.patch: Adding a new polkit
    action "org.freedesktop.NetworkManager.wifi-scan" so that
    distributions can add specific rule to allow Wi-Fi scans
    (bsc#1122262, glfo#NetworkManager/NetworkManager!68).

Files

/usr/lib/NetworkManager/dispatcher.d/90-nm-cloud-setup.sh
/usr/lib/NetworkManager/dispatcher.d/no-wait.d/90-nm-cloud-setup.sh
/usr/lib/systemd/system/nm-cloud-setup.service
/usr/lib/systemd/system/nm-cloud-setup.timer
/usr/libexec/nm-cloud-setup
/usr/share/man/man8/nm-cloud-setup.8.gz


Generated by rpm2html 1.8.1

Fabrice Bellet, Tue Aug 9 11:06:05 2022