Index index by Group index by Distribution index by Vendor index by creation date index by Name Mirrors Help Search

sysconfig-0.85.2-lp151.1.1 RPM for aarch64

From OpenSuSE Ports Leap 15.1 for aarch64

Name: sysconfig Distribution: openSUSE Leap 15.1
Version: 0.85.2 Vendor: openSUSE
Release: lp151.1.1 Build date: Sun Feb 24 23:57:08 2019
Group: System/Base Build host: obs-arm-2
Size: 132050 Source RPM: sysconfig-0.85.2-lp151.1.1.src.rpm
Summary: The sysconfig scheme for traditional network scripts
This package provides the SUSE system configuration scheme for the
traditional "ifup" alias "netcontrol" network scripts.






* Thu Feb 14 2019
  - version 0.85.2
  - Fixed changes file to mention relevant github pull requests.
  - Removed remaining preun rpm hook from EOL openSUSE versions
  - Merged /var/adm/netconfig move revert from openSUSE:Factory
    causing to not find md5 sums from previous netconfig version
    due to incorrectly merged hook in spec file and trouble on
    transactional systems without writeable /var/lib/netconfig.
    Removed obsoletes revert-var-adm-lib-netconfig-move.patch.
  - Merged rpm spec bash section marks (gh#openSUSE/sysconfig#23)
* Sat Feb 09 2019 Stephan Kulow <>
  - HOTPATCH (to be reverted): revert-var-adm-lib-netconfig-move.patch
* Thu Jan 17 2019
  - version 0.85.1
  - removed modprobe.d/50-blacklist.conf, which will be provided by
    the suse-module-tools package instead (boo#1107611). See also:
* Fri Dec 21 2018
  - version 0.85.0
  - netconfig: change to write resolv.conf,yp.conf,forwarders.conf
    to files in /[var/]run/netconfig/ and link in /etc (fate#325872)
  - netconfig: add to update ntp servers in chrony (bsc#1099272) and
    cleaned up to use start-ntpd addserver to update ntpd servers.
  - Remove code to update from openSUSE older than 12.3, which is EOL
  - Move /var/adm/netconfig to /var/lib/netconfig to become more FHS
    conform (gh#openSUSE/sysconfig#18).
* Thu May 17 2018
  - version 0.84.3
  - netconfig: change policy to permit non-NM settings (bsc#1079793)
    As requested and approved by NetworkManager maintainer, the 'auto'
    policy permits now also per interface settings provided by other
    services when NetworkManager is enabled. That is, the auto policy
    resolving has been changed from "STATIC_FALLBACK NetworkManager"
    to "STATIC_FALLBACK * NetworkManager".
* Mon Mar 19 2018
  - Use %license instead of %doc [bsc#1082318]
* Mon Nov 27 2017
  - version 0.84.2
  - spec: revert change to use _fillupdir in update hook from < 0.80
  - merged fixes of the the fillup templates logic and macro in by Marcus Meissner
* Thu Nov 23 2017
  - Replace references to /var/adm/fillup-templates with new
    %_fillupdir macro (boo#1069468)
* Thu Jun 08 2017
  - Make /etc/ppp owned by root:root. The group dialout usage is no
    longer used.
* Mon Apr 10 2017
  - version 0.84.1
  - netconfig: cleanup tmp files (boo#1010760)
    When /var/run/ntp/servers-netconfig has been modified externaly,
    don't try to backup or keep tmp files to show what we would do.
  - netconfig: improve input check for duplicate keys (bsc#1009801)
* Tue Oct 11 2016
  - Remove requires for not needed insserv (bsc#999850)
* Fri Sep 09 2016
  - version 0.84.0
  - netconfig: intoduced a batch mode (bsc#989741)
    It permits to preform multiple modify/remove operations
    and call the effective update at the end of the batch.
  - netconfig: use ntpq, as ntpdc is deprecated (bsc#894889),
    lower sleep lock wait granularity and fix NTP_KEYS parsing
  - Drop the omc svcinfo data as they are not used anymore
  - Run spec-cleaner to remove few obsolete things
  - Drop cvs helper files as we are in git
  - Rename to
* Tue May 31 2016
  - Add a blacklist entry for the ACPI power meter driver (bnc#974373)
* Fri May 20 2016
  - version 0.83.9
  - ppp: install refactored ip-up and related scripts (bsc#865573)
  - removed patches shipped inside of the source archive
    [- 0001-dhcp-network-variables-for-dhcp4-user-class.909307.patch]
    [- 0002-netconfig-use-ntpd.service-on-13.2-boo-930309.patch]
* Tue Jun 09 2015
  - netconfig: use ntpd.service on >13.1 (boo#930309)
    [+ 0002-netconfig-use-ntpd.service-on-13.2-boo-930309.patch]
* Tue May 12 2015
  - sysconfig-netconfig requires /bin/logger, otherwise the following
    happens: wickedd[31]:
    line 44: logger: command not found
* Tue Feb 17 2015
  - dhcp: add variables for handling of DHCPv4 user-class (bsc#909307)
    [+ 0001-dhcp-network-variables-for-dhcp4-user-class.909307.patch]
* Tue Jan 13 2015
  - version 0.83.8
  - netconfig: use domain name from hostname (bnc#912891)
    When there is no dns domain or search list provided (by dhcp),
    but a hostname as FQDN, use it's domain for /etc/resolv.conf
    search list.
  - netconfig: merge NetworkManager settings on -m (bnc#900982)
* Tue Oct 28 2014
  - rpm: kill all NetworkManager child processes on migration
    Before we stop (the always running) NetworkManager.service,
    ensure to kill all (child) processes when migrating from the
    NETWORKMANAGER=no variable (bnc#895447).
* Wed Sep 24 2014
  - rpm: fixed SUSE spelling in the spec file (bnc#889002)
* Tue Sep 23 2014
  - version 0.83.7
  - netconfig: create missed /var/run/ntp directory (bnc#892877)
    When the directory does not exists yet, the ntp service is not
    yet started/running and it is even more important to write the
    servers so ntpd can pickup them at start.
  - config: changed NM_ONLINE_TIMEOUT to 30 (bnc#889175)
  - config: updated to list new variables in network/dhcp,
    cleanup of ifcfg.template and network/config variables
* Wed May 28 2014
  - version 0.83.6
  - netconfig: fixed manual page to not refer README (bnc#876755)
* Wed May 28 2014
  - version 0.83.5
  - sysconfig/network/config: new default to send gratuitous arp
    Enabled to send gratuitous arp by default, when duplicate IPv4
    check is enabled and were successful (bnc#879911,fate#314399).
  - netconfig: improved troubleshooting capabilities
    variables allowing to run all netconfig calls in debug mode
    and force update of modified files as default. Show service,
    policy resolving info and log the commandline in debug mode.
    Fixed to log info/warnings that were printed to stderr only
    before (bnc#860644, bnc#868323).
* Wed Mar 12 2014
  - version 0.83.4
  - config: check ipv4 duplicates by default (fate#314399)
* Fri Feb 21 2014
  - version 0.83.3
  - Cleaned up comments and obsolete variables in network/dhcp
    and network/config config files (fate#312939,fate#314482).
  - netconfig: just systemctl not init scripts (bnc#864696) as
    all for this version supported systems are using systemd
    which forwards to init scripts as needed.
* Fri Feb 07 2014
  - Remove the blacklist entry for the uas driver (bnc#862397)
* Thu Jan 23 2014
  - version 0.83.2
  - A systemctl status is quite expensive as it (by default) parses
    logs, etc. Use is-active where we need the code only (bnc#859360).
* Fri Jan 17 2014
  - version 0.83.1
  - Install /sbin/service link as /sbin/rcnetwork for compatibility
    with older sysconfig as it is quite often used absolutely.
* Mon Jan 13 2014
  - Use an unconditional rcnetwork symlink to /sbin/service
* Thu Jan 09 2014
  - version 0.83.0
  - Recommend wicked-service instead of sysconfig-network as the
    default network service and drop sysconfig-network. The wicked
    service package provides systemd service files requesting the
    network.service alias at service enable time as well as the
    ifup compatibility scripts using wicked as network backend
  - ifcfg-bonding.5: fixed to use startmode hotplug in slave example
  - Use ZEROCONF_ROUTE=no as new default (fate#314482)
    The NOZEROCONF="yes" variable were double-negated in it's meaning
    and did not reflect what the variable really does (fate#314482).
* Wed Jan 08 2014
  - rcnetwork: use service type oneshot, not forking
    Sometimes, network fails to start / stops itself, because the per
    interface services started inside it, need already started network
    and fail as network did not yet reached started state. This does
    not happen with oneshot network service type (bnc#853908).
* Thu Dec 05 2013
  - version 0.82.1
  - Changed global NOZEROCONF default to "yes" (automatic zeroconf
    route disabled), removed obsolete LINKLOCAL_INTERFACES variable.
    Use NOZEROCONF="no" per interface to enable (fate#314482).
* Thu Dec 05 2013
  - version 0.82.0
  - Dropped udevmountd, the functionalty has been included in systemd
* Tue Nov 05 2013
  - version 0.81.7
  - Skip also systemd redirection for ifdown -o ifplugd (bnc#846031).
  - Fixed to check restorecon existence before calling it as selinux
    is not installed by default (bnc#845792).
* Tue Nov 05 2013
  - fix starting dhcpcd from ifplugd (bnc#846031)
* Tue Oct 29 2013
  - version 0.81.6
  - Merged changes from $OBS/Base:System/sysconfig
* Wed Oct 16 2013
  - blacklist udlfb because only udl can be used with xrandr 1.4
* Mon Oct 14 2013
  - set SELinux label for /dev/.sysconfig after creation (bnc#845792)
    * sysconfig-0.81.5-restore_selinux_context_on_RUN_FILES_BASE.patch
  - use systemctl when possible instead of calling init scripts directly
    * sysconfig-0.81.5-netconfig-use_systemctl.patch
* Wed Oct 02 2013
  - /etc/modprobe.d/50-blacklist.conf: cleaned up obsolete/dropped
    kernel drivers (bnc#843141,bnc#843169). Thanks to Michal Marek!
    sk98lin: dropped from the kernel in 2.6.26
    stradis: dropped in 2.6.38 (39c3d48)
    eepro100: dropped in 2.6.29 (6b1abba)
    slamr,slusb: no smartlink-softmodem-kmp since 10.3
    ich2rom: rplaced by ichxrom in 2.6.12 (304aa41)
    eth1394: dropped in 2.6.37 (66fa12c)
    uhci: dropped in 2.5.27
    tsdev: removed in 2.6.24 (7009317)
    snd_bt87x: duplicate of snd-bt87x
    clgenfb: replaced by cirrusfb in 2.5.67
    cyblafb: replaced by tridentfb in 2.6.30
    unikey: not in mainline history, 2.4?
    encode-{big5,gb,gbk,jis,kscm}: not in mainline history, 2.4?
    fbcon-{afb,ilbm,iplan2p2,iplan2p4,iplan2p8}: removed in 2.5.51
    fbcon-{cfb2,cfb4,hga,mfb,vga-planes},fbgen: removed in 2.5.51
    fbcon-{mac,vga}: removed in 2.5.28
    vmware: never upstream, no reference in  2.5+
* Wed Oct 02 2013
  - bt878 card causes udevd to complain (bnc#800897)
    Fixed to use 'echo' shell builtin instead /bin/echo
* Fri Sep 27 2013
  - version 0.81.5
  - Fixed to support dummyX interfaces again (bnc#694810)
  - Improved default netconfig dns ranking defaults and man page.
  - Do not set "ap any" for wlags49* wireless driver (bnc#837941)
* Mon Sep 23 2013
  - version 0.81.4
  - Added IgnoreOnIsolate=yes to network@.service (bnc#841315)
    The network@<ifname>.service are marked as PartOf network.service,
    but this one way stop/restart dependency is not propagated on a
    systemctl isolate ("runlevel" change) and the network@ services
    were stopped. Added IgnoreOnIsolate=yes to stop them on network
    service stop only.
* Mon Sep 09 2013
  - version 0.81.3
  - Fixed to reload syslog on hostname changes using systemctl as
    there is no /etc/init.d/syslog script since syslog-service-2.0
  - Added a systemctl guard to rpm post script
* Tue Sep 03 2013
  - version 0.81.2
  - Added otherproviders(/sbin/ifup) conflict to sysconfig-network.
  - Do not stop the network interfaces, but kill the network and all
    network@<ifname> services to kill all dhcp clients on uninstall.
* Wed Aug 28 2013
  - version 0.81.1
  - Initial network and network@ service files to avoid, that systemd
    udevd kills dhcp clients, which where forked from the udev hotplug
    rule and for better control (bnc#821879).
* Fri Aug 16 2013
  - version 0.81.0
  - Initial sysconfig split into udevmountd, sysconfig, -netconfig
    and -network packages, to allow another implementation of the
    /etc/init.d/network and /sbin/ifup scripts.
  - Dropped obsolete README files.
* Wed Aug 14 2013
  - version 0.80.7
  - use mountpoint utility without absolute path
    While on 12.3 there were a /bin/mountpoint, 13.1 moved
    it to /usr/bin/mountpoint without a compatibility link.
    Drop path when calling it, it should work both ways.
    Thanks to Andrey Borzenkov for his patch.
  - rcnetwork: fixed to not drop state while reload
  - netconfig: add /etc/resolv.conf options and sortlist
    Added global network/config NETCONFIG_DNS_RESOLVER_OPTIONS
    and NETCONFIG_DNS_RESOLVER_SORTLIST variables, allowing to
    set /etc/resolv.conf options and sortlist (fate#316048).
* Thu May 16 2013
  - version 0.80.6
  - Merged changes from $OBS/Base:System/sysconfig and SLE-11-SP3.
  - Fixed to set link settings on bonding slaves while enslave.
    Before enslaving a new slave, apply link settings like the MAC
    address or MTU to the slave as required e.g. for fail_over_mac
    active, where the bonding interface is using the MAC of the
    currently active slave (bnc#815025).
  - Fixed to stop dhcp clients and remove IP addresses on not yet
    enslaved bridge ports and bonding slaves. The bridge or bond
    interface has the IP addresses assigned itself instead.
    The port/slave may still have IP addresses, when the IP config
    of an active (ethernet) interface has been moved into a bridge
    or bond config, e.g. while "virsh iface-bridge eth0 br0". There
    is no full ifdown for the port interface to not break the vlans
    (and their bridges) which may refer to the port too (bnc#813148).
* Thu May 16 2013
  - Add forgotten patch sysconfig-0.80.5.patch
* Tue May 07 2013
  - Accommodate poll.tcpip to systemd
* Wed Mar 20 2013
  - Fixed to wait for dhcp/ipv6 under systemd again.
    Fixed regression caused by bnc#785240, bnc#780644 fixes to not
    discard the dhcp/ipv6 dupplicate address detection in progress
    error codes under systemd completely, but wait until dhcp/ipv6
    dad finished or the WAIT_FOR_INTERFACES timeout is reached and
    then discard in the status returned to systemd (bnc#808718).
    It caused failures of other services trying to bind tentative
    IPv6 addresses, e.g. in mixed dhcp4 / static IPv6 setups.
    Thanks to Rolf Eike Beer for the report/tests/debug outputs.
* Mon Mar 04 2013
  - Fixed to create migration marker directory before using it,
    it does not exists e.g. while CD based update (bnc#806989).
* Fri Feb 22 2013
  - version 0.80.5
  - Fixed to use a guarded migration hook from openSUSE < 12.3, that
    disabes the (always enabled before) NetworkManager.service on
    NETWORKMANAGER=no and mask the network.service (provided by the
    /etc/init.d/network script) on NETWORKMANAGER=yes until NM has
    been installed and enabled as network.service (bnc#803058).
* Thu Jan 31 2013
  - version 0.80.4
  - Fixed to use a suffix in ETHTOOL_OPTIONS variable to allow to
    apply every setting (e.g. 'gro off lro off') separately, as the
    ethtool utility stops at first failure and the NIC driver may
    reject settings when the link is not up or they're unsupported.
    Further, added ETHTOOL_UP_RETRY and ETHTOOL_UP_WAIT variables
    to optionally wait after the link has been set up and retry to
    set the ETHTOOL_OPTIONS*. Updated ifcfg(5) man page (bnc#787744)
  - Applied 81-mount.rules fix by Robert Milasan to not mount file
    systems with the noauto flag set (bnc#798641, [SWAMPID 50702]).
* Mon Jan 28 2013
  - version 0.80.3
  - rcnetwork: reworked suspend/resume hooks (bnc#781106)
* Wed Jan 23 2013
  - version 0.80.2
  - rcnetwork: handle also partial -o type|skip options
* Wed Jan 23 2013
  - version 0.80.1
  - rcnetwork: Improved redirection and option handling and cleaned
    up obsolete localfs/remotefs options and network manager hooks.
    Honor SYSTEMCTL_OPTIONS variable which can be set to systemctl
    options e.g. --ignore-dependencies while yast2 second stage run
  - Fixed to use dhclient6 in dhcp6_client state variable (bnc#798828).
* Tue Jan 15 2013
  - version 0.80.0
  - Removed the NETWORKMANAGER=yes/no variable from network/config.
    The NetworkManager.service (or other) installs a network.service
    alias link while "systemctl enable" and removes on "disable",
    which masks the network.service provided by /etc/init.d/network.
    Current service has to be stopped while "enable" or "disable".
    The "systemctl -p Id show network.service" is used to query the
    currently enabled network service. It returns either the name
    of the service providing the alias, i.e. NetworkManager.service
    or network.service - when the /etc/init.d/network provides it.
    The /etc/init.d/network script forwards common actions (start,
    stop, ...) to systemd which executes them for the currently
    active network.service. (bnc#764055,bnc#764336,bnc#798348).
  - Adopted /etc/init.d/network, netconfig, ifup to use the service
    Id query instead of NETWORKMANAGER variable, added forwarding.
  - Removed NetworkManager start/stop code from /etc/init.d/network
    and disabled NetworkManager dispatcher hook installation.
  - Added removal of the NETWORKMANAGER variable to spec post-install
* Fri Jan 11 2013
  - Fixed to correctly apply STP constrains also to float time
    values with a 1/100 sec precision (bnc#753387,bnc#794720).
  - Updated bridge documentation link in ifcfg-bridge.5 (bnc#791553).
* Fri Nov 23 2012
  - version 0.76.8
  - Changed rcnetwork to not report dhcp in background to systemd
    (bnc#785240,bnc#780644). You may set DHCLIENT_MODIFY_SMB_CONF
    to "no" in /etc/sysconfig/network/dhcp as the samba/cifs hooks
    make systemctl calls to reload/restart nmb and other services
    which block (systemd deadlock) ifup scripts for a long time.
  - Reverted ifup pre/post and if-up.d/if-down.d scripts processing
    feature in background and removed WAIT_BACKGROUND_JOBS variable
    as it tends to cause unexpected behavior / side effects.
  - Replaced udevrulesdir patch with --with-udevdir configure option.
  - Removed obsolete network-remotefs init script (disabled before).
* Mon Nov 05 2012
  - Added patch (set_new_udevrules_dir.patch) to ensure that the
    udevmountd and the udev rules are installed at the right place
* Thu Nov 01 2012
  - version 0.76.7
  - Start ifup pre/post and if-up.d/if-down.d scripts in background.
    The new network/config variable WAIT_BACKGROUND_JOBS specifies
    the wait limit. Default is 5 secons, 0 disables backgrounding
    and reverts to previous blocking behavior. Attempt to solve the
    issues where interfaces are not come up in time, because some
    hook-script are blocking ifup (bnc#780644).
  - Execute netconfig/ntp-runtime updates in background (bnc#780644).
  - Man-page hint to use STARTMODE=nfsroot when using iSCSI or FCoE.
* Fri Oct 26 2012
  - version 0.76.6
  - Fixed to check and reject too long interface names or names
    with suspect characters, do not wait when creation of virtual
    interface name fails (bnc#784952).
  - Fixed to not report failure while setting unsupported power
    management option in ifup-wireless as the support and features
    depends on the driver (bnc#716652).
  - Fixed ifup-dhcp to not start dhcp clients too early or they may
    be unable to send packets and just increase resend time. Instead,
    load af_packet module early and wait for link ready (bnc#780644).
  - Fixed netconfig/ntp-runtime to not use try-restart as its start
    may block for a while, so just add servers ourself. When ntpd is
    not running (not yet started), the init script will pickup our
    servers later (bnc#780644).
* Thu Sep 27 2012
  - version 0.76.5
  - Added support for NOZEROCONF option to disable zero config route.
* Thu Aug 09 2012
  - version 0.76.4
  - Check before running a script in netcontrol_services (bnc#775281).
* Fri Jul 20 2012
  - Applied patch blacklisting uas driver confirmed by Intel as
    a hopeless case (bnc#770301).
* Thu Jul 19 2012
  - /etc/init.d/network: do not check the renamed-flag when udev
    daemon is not running as in LXC containers. It caused to wait
    until the udev rename finished with a not started network and
    failure result (bnc#771615).
* Mon Jun 11 2012
  - version 0.76.3
  - Fixed ifrenew-dhcp to use built-in dhcpcd --renew (bnc#763533).
  - Moved the X-Systemd-RemainAfterExit LSB tag before Description
    in /etc/init.d/network scripts as workaround for the case that
    a not yet fixed systemd is in use (bnc#763533).
  - Fixed to differentiate ib/ibchild/bond types and stop ib-bond
    interfaces correctly.
* Tue Apr 10 2012
  - version 0.76.2
  - ifup-bridge: apply stp contstrains when STP is on (bnc#753387)
  - ifup-route: fixed use of -4/6 option for ip route (bnc#745252)
    and do not require dummy gateway for ipv4 multicast routes.
  - Added tests to the 77-network.rules rule file if the /sbin/ifup
    and /etc/sysconfig/network/scripts/ifup-sysctl exist (bnc#724775),
    disabled script run and updated 81-mount.rules file
    to work with more actual udev versions. Thanks to Robert Milasan,
    who proposed these changes.
* Mon Feb 27 2012
  - In poll.tcpip avoid warnings messages of fetchmail by using the
    owner ship of the system wide configuration file /etc/fechmailrc
    which should be owned by the user and group mail.
* Wed Feb 15 2012
  - version 0.76.1
  - Updated GPL in doc/COPYING, address statements, spec tags.
  - Disabled obsolete network-remotefs as /usr is mounted in initrd
    when needed and we don't need to handle it any more (equivalent
    with a remote /-fs now). More cleanup follows.
  - Always enable boot-wait mode under systemd
  - Improved extradebug to include all args and to log pid.
  - Filter out labeled ipv4 addresses in get_ipv4address used
    to fetch the 1st address from the TUNNEL_DEVICE interface.
    Allows to configure a label for each address that should
    be skipped. Updated ifcfg-tunnel.5 man page. (bnc#741453)
    Thanks to Jon Nelson for his report with a fix proposal!
  - Explicitly disabled posix mode in all bash scripts as we are
    using several features not supported in posix mode (bnc#739338).
  - Fixed ipv6 dad / link ready wait time calculation (1/10 of the
    specified time) and replaced useless up flag check loop with
    link_ready_wait to avoid send errors from dhclient6 (bnc#697929).
  - Added to require vlan, bridge-utils and tunctl packages via spec,
    that are often required in base networking configurations and
    are missed otherwise in 2nd installation stage, that may be
    unable to install them for some reason (bnc#733118).
* Wed Jan 04 2012
  - Fixed incorrect exists_iface_config test in ifprobe
* Mon Dec 19 2011
  - Fixed to quote config / interface variables in ifservices script
    and cleaned up content of the ESSID which gets appended to them
    by NetworkManager dispatcher hook (bnc#735394, CVE-2011-4182).
    Fixed also to return proper exit code 0 in NM dispatcher hooks.
* Mon Dec 05 2011
  - version 0.76.0
  - Do not suggest dhcp6c client from dropped dhcpv6 package
    in ifup-dhcp, marked dhcp6c as deprecated in network/dhcp
    and changed to use dhclient6 as first choice (bnc#734723).
  - Added X-Systemd-RemainAfterExit: true LSB header (bnc#727771)
  - Fixed iBFT support to not use any ifcfg files, added workaround
    for virtio iBFT references (additional path component), try to
    request the iBFT IP-Address in DHCP mode and apply the iBFT DNS
    name servers (when any) via netconfig (bnc#723796).
  - Changed to call ip addr flush in ifdown, but after ip link set
    down as it does not cause ipv6 sysctl tree side effects then
    at least with more recent kernels (bnc#580018,bnc#559170).
* Sun Nov 27 2011
  - add libtool as buildrequire to avoid implicit dependency
* Fri Oct 21 2011
  - Changed NM_ONLINE_TIMEOUT default back to 0 to avoid
    unneeded waiting for NM interfaces at boot (bnc#722304)
* Wed Oct 05 2011
  - version 0.75.4
  - Don't fail when wireless power setting isn't supported
    Thanks to Manuel Stol for the patch (bnc#716652).
  - Cleanup link / dad wait verify flag after status update
* Mon Sep 26 2011
  - Fixed inverted link ready return value test
* Mon Sep 26 2011
  - version 0.75.3
  - Handle changing between ifup and NM with systemd and fixed
    to enable boot flags in /etc/init.d/network while booting
    under systemd (bnc#719214).
  - Wait/check until the end of ipv6 duplicate address detection
    to not cause failures of following services (bnc#697929).
* Thu Sep 08 2011
  - version 0.75.2
  - Added additional state for network-remotefs, so correct status
    is shown after remotefs has been stopped. Stopping localfs,
    stops remotefs when it is started as well (bnc#592270).
  - Use max_bonds=0 bond modprobe option to avoid automatic bond0
    interface creation as we may need a different name.
    Do not set the bond interface link up before enslaving - this
    is not needed by bonding any more with current kernels.
* Mon Sep 05 2011
  - version 0.75.1
  - Warn and ask the user to report a bug when the ifcfg defines the
    INTERFACETYPE variable to override behaviour of ifup: There is a
    bug in ifup when it is required to define it (bnc#711762).
    Improved also variable description in ifcfg.5 manual page.
  - Added missed dhcp4,dhcp6,ibft,none BOOTPROTO values to
    ifcfg.template (bnc#701000).
  - Added WIRELESS_AUTH_MODE='no-encryption' option handling to
    ifup-wireless, because YaST sets it (bnc#648830).
  - Fixed get_depending_ifaces to not return bonding slaves by
    default as it is not required to stop the slaves before the
    bonding master goes down and in fact it may cause a system
    hang, when the slaves are infiniband child interfaces, that
    are deleted while ifdown (bnc#698478).
* Mon Aug 29 2011
  - Fix incorrect systemd detection in disable-NM-under-systemd.patch
* Fri Aug 26 2011
  - Added vpnc to the default list of preferred services for DNS
    ranking (NETCONFIG_DNS_RANKING=auto).
* Thu Aug 25 2011
  - Add disable-NM-under-systemd.patch: don't handle NM startup with
    network initscript when running under systemd.
* Thu Aug 11 2011
  - Fixed to apply wireless power settings and allow any setting as
    defined in the iwconfig(8) manual page.
* Wed Aug 10 2011
  - Do not use -fno-strict-aliasing when not needed
* Thu Aug 04 2011
  - remove /var/lock/subsys references
* Tue Mar 15 2011
  - version 0.75.0
  - Moved 77-network.rules and 81-mount.rules to /lib/udev/rules.d
    as both contain static rules.
  - Fixed spec to use 0600 mode for ifcfg-lo, because of bnc 670871.
  - Send gratuitous arp when new SEND_GRATUITOUS_ARP variable is set
    to yes either in global network/config or in per-interface ifcfg
    file. Fixed to use CHECK_DUPLICATE_IP for ipv4 only (bnc#617373).
  - Enslave a slaves into a bond on hotplug "up" event (bnc#669361).
* Mon Feb 14 2011
  - fixed postinstall script to avoid, that (wireless) ifcfg files
    become world readable while installation because of a fillup
    run; changed to explicitly set 0600 permissions (bnc#670871).
* Tue Jan 25 2011
  - version 0.74.5
  - netconfig: strip trailing dots from domains dns search list
    as added by the dhcp 4.x dhclient(6), to skip duplicates.
* Mon Jan 24 2011
  - Fixed gawk patch to skip - not in dist archive.
* Tue Jan 18 2011
  - Use gawk directly as in our dependencies instead of just awk,
    that is a /etc/alternatives link, that may be broken in rare
    cases (bnc#664726).
  - Fixed typo in doc/ifcfg.5, IPv4 autoip, not IPv6
* Fri Jan 07 2011
  - version 0.74.4
* Wed Jan 05 2011
  - Fix for udevmountd to allow mounting of multipath devices.
    With this and the corresponding multipath-tools patch,
    iscsi mounting works as advertised, both multipathed and
    non-multipathed (bnc#630434).
* Wed Dec 22 2010
  - Fixed ifup-bonding to fail and remove bond when there are no
    active slaves at the end and not on enslave failure (bnc#660774).
* Thu Dec 09 2010
  - version 0.74.3
  - Use iBFT primary or PXE BOOTIF inteface as primary dhcp interface
    (sets the default route and hostname) and the "first up interface
    wins" selection used before as fallback, when there is explicit
    user configuration available. Updated the DHCLIENT_PRIMARY_DEVICE
    variable description, added it also to the global network/dhcp
    config file (bnc#653365).
  - Improved default vlan name scheme docs in ifcfg-vlan.5 man page.
  - Use startmode auto instead of onboot in ifcfg-lo (bnc#533818)
  - Dropped obsolete and confusing etc/modprobe.d/50-ipv6.conf file
    (bnc#632530, bnc#656916).
  - Fixed link_wait scriptname check and ping usage (bnc#644738);
    improved to allow the user to specify the steps.
* Tue Dec 07 2010
  - add a virtual provides for network script
* Thu Nov 11 2010
  - version 0.74.2
  - Adopted to search tunctl in /sbin (bnc#650468)
  - Fixed check if ipv6 is enabled in ifup-dhcp (bnc#616765).
  - Fixed ifplugd-selectif script to use -1 as default carrier
    flag and initialize interface type when unset to correctly
    print wireless instead of cable messages (bnc#637183).
  - Require wpa_supplicant if a wpa_supplicant config is specified
  - Improved ifup-bridge port prio and cost handling.
    lists to skip setting of the port prio or path cost for particular
    ports while setting it for others.
* Tue Sep 14 2010
  - Fixed init flags to not start network in runlevel 2 (bnc#638508).
* Wed Aug 18 2010
  - version 0.74.1
  - Fixed wireless hardware to wext/nl80211 WPA driver mapping.
    Changed to use -Dnl80211,wext by default for untested drivers
    to let the wpa_supplicant fallback to wext when nl80211 is not
    available. Adjusted info message about untested drivers and
    enabled untested driver handling also in case wpa_supplicant
    is not required but the user prefers to use it (bnc#623340,
    [#623676],#624182,#625403,#631283). Thanks to all reporters,
    especially to Larry Finger and Vladimir Botka!
* Tue Jul 20 2010
  - version 0.74.0
  - Changed ifup-wireless to use wext wpa driver for the rt2870sta,
    ipw2200 and ipw2100 wlan adapter driver (bnc#623676,bnc#623340).
* Mon Jul 12 2010
  - Fixed check whether ipv6 is enabled or not in /sbin/ifup-dhcp to
    avoid dhcpv6 client start in case the interface is configured to
    start both, dhcpv4 and dhcpv6 clients (bnc#616765).
* Tue Jun 08 2010
  - version 0.73.7
  - Added writing of name server addresses to /etc/resolv.conf in
    forwarder mode ("bind", "dnsmasq") as fallback for the moments,
    when the local forwarder process is stopped, e.g. during update
    (bnc#607511). Set NETCONFIG_DNS_FORWARDER_FALLBACK=no to revert.
  - Fixed ifup-bonding to not fail, when the bonding already exists
    (bnc#609809) or when bonding options are using numeric arguments
    instead of names (fixes also bnc#572367).
  - Added BONDING_SKIP_REMOVE_WORKAROUND variable allowing to skip
    bonding interface removal in ifdown as workaround for kernel
    modules not reacting correctly to UNREGISTER event (bnc#576355).
  - Updated USERCONTROL variable description (bnc#605853).
  - Removed obsolete (pre 10.3) migration hooks
  - Removed dbus from Required-Start in /etc/init.d/network,
    added earlysyslog to Should-Start
* Tue May 25 2010
  - Use wext wpa driver for the broadcom wl hw driver (bnc#585802).
* Fri May 07 2010
  - version 0.73.6
  - Completed and enabled dhclient6 support.
* Thu Apr 22 2010
  - version 0.73.5
  - Added WIRELESS_WPA_DEBUG_OPTION option with default of -dddt used
    while wpa_supplicant start when DEBUG is set (yes or wireless).
  - Fixed ifup-wireless to use PREFER_WPA_SUPPLICANT=yes when unset
    as specified as default in ifcfg.template.
  - Switched to use the new nl80211 wpa_supplicant driver required to
    support WIRELESS_REGULATORY_DOMAIN by default in the ifup-wireless.
    Can be switched back using WIRELESS_WPA_DRIVER='wext' (bnc#585802).
  - Updated interface type detection checking new sysfs tun_flags for
    tap and the phy80211 link for mac80211 based wireless interfaces.
  - Use git commands when in git repository (show/create ChangeLog)
  - Documented xen routed network setup using sysconfig mechanizms
    in the README.virtualization.
* Mon Apr 12 2010
  - added none option to WIRELESS_POWER and made it default
* Mon Mar 29 2010
  - make the network script cleanup the netconfig scripts on stop,
    so that it doesn't have to be done on boot - where it's much more
* Fri Mar 12 2010
  - version 0.73.4
  - Removed the haldaemon Required-Start/Stop dependency from the
    /etc/init.d/network-remotefs script, NetworkManager dropped it.
  - Added reading of a temporary startmode in ifdown to skip
    stopping of the interface and avoid shutdown problems when
    multipathed iscsi device was mounted (bnc#581259).
  - Do not use own ipoib mode/umcast defaults in ifup-infiniband
    but honor the /etc/sysconfig/infiniband:SET_IPOIB_CM=yes/no
    setting and apply when explicitly requested only (bnc#579555).
  - Fixed ifup-dhcp to check the complete state mark also for
    dhclient, that reports it now too (bnc#585380,bnc#518219).
  - Fixed dhcpcd-hook to call ifup ... -o dhcp (if-up.d/ifservice
    scripts) when dhcpcd reports "complete" configuration instead
    in "up", so also the new hostname is already set (bnc#583800).
  - Fixed to apply (per interface) sysctl settings also in ifup,
    so changes to the configuration have an effect (bnc#494958).
  - Added scripts/link_wait disabled by default, that can be used
    via if-up.d to check whether an interface is ready to use or
    just wait some time in cause of devices that does not report
    the link state correctly (bnc#570935).
  - Fixed ifdown to stop dhcp, flush IPs and set down interfaces
    marked BOOTPROTO=none (slave/ports) or the dhcp clients, ...
    will stay active after a rcnetwork restart when an interface
    configured with dhcp gets reconfigured as a bridge port or a
    bonding slave. Fixed ifstatus to report accurate status codes,
    so rcnetwork does not show red errors for virtual interfaces
    with STARTMODE=off (bnc#581245,bnc#562030).
  - Fixed ifdown-dhcp to remove pid file that can't be cleaned up
    when the client has been killed with -KILL (e.g. nfsroot case)
    and fixed ifdown to not execute ifdown-dhcp twice (bnc#524675).
  - Changed to use expanded option lists for netconfig actions in
    usage text (bnc#569609).
  - Improved netconfig.8 DNS forwarder/static servers documentation
    and yast2 meta tags in network/config file to show the currently
    available settings (bnc#580361,bnc#580506).
  - Filter out loopback addresses from forwarder configs (dnsmasq,
    bind) in NETCONFIG_DNS_FORWARDER!=resolver mode, so they don't
    cause any loop and allow them in /etc/resolv.conf to make it
    possible to get the system running, when the glibc feature to
    use the name server on the local machine gets broken again or
    the user wants ipv4 only (bnc#580361,bnc#549447,bnc#441947).
  - Fixed ifdown-dhcp to release a dhcpv6 lease correctly when
    requested, added a separate DHCLIENT6_RELEASE_BEFORE_QUIT
    variable (bnc#524675).
  - Consider the bind mounted files scenario instead of symlinks
    to a writable location in all netconfig calls to create
    temporary files.
  - Applied patch by
    When no temporary files can be created next to /etc/resolv.conf
    (like /etc/resolv.conf.XXXXXXX), create the temporary file in
    /tmp instead: the root filesystem may be read-only, and
    /etc/resolv.conf may be bind mounted to a writable location.
    Likewise for /etc/yp.conf.
* Wed Feb 17 2010
  - do not require hal, NetworkManager dropped it
* Fri Feb 12 2010
  - Added route proto filter to ifstatus-route to evaluate only
    routes that may have been set by ifup-route and skip routes
    added e.g. by zebra to not to waste CPU for big zebra routing
    tables (bnc#572205). Thanks to Adrian Ban for initial patch!
* Thu Jan 21 2010
  - Fixed ifup-802.1q script to correctly search for the interface
    name of a vlan id in case multiple interfaces are using same
    vlan id. Thanks to Adrian Ban for a correction! (bnc#572186)
* Thu Jan 14 2010
  - version 0.73.3
  - Fixed netconfig module/action exit code propagation (bnc#568398)
  - Applied udevmountd udev rule patch by Ludwig Nussel: don't handle
    crypto devices, boot.crypto does that already (bnc#569942)
  - Fix to allow ifup $tap when it already exists, e.g. created by
    kvm (bnc#557864).
  - Synchronized ifup-dhcp and dhcpcd configuration steps to report
    status after dhcpcd really finished all its steps (bnc#518219).
  - Improved detection if a dhcp client is running, causing ifup-dhcp
    and the network script to report false failures, when the client
    forks at the moment of the check (bnc#562030 and others).
  - Fixed rc option handling in ifup-sysctl, show own name in debug
  - Documented the if-up.d/ndp-proxy and its config file in the
    ifndp-proxy.5, fixed to follow the sysconfig config file name
    conventions (fate#304415).
  - Added ifup-sysctl script applying per interface sysctl settings
    and documented it in the ifsysctl.5 man page (bnc#494958).
* Sun Dec 20 2009
  - enable parallel building
* Fri Dec 04 2009
  - version 0.73.2
  - Fixed to not set WIRELESS_AP at all for wl driver (bnc#555774)
  - Avoid error message, when pcmcia device does not provide its
    vendor/name info via sysfs device/prod_id files (bnc#551640).
  - Allow ifup lo, even NetworkManager is active or it breaks the
    lo setup via /etc/init.d/boot.localnet (bnc#547620,bnc#547928).
  - First implementation of BOOTPROTO=ibft (fate#308283,bnc#542225)
    causing to either start dhcp client or skip any setup -- it is
    already done in the initrd. Intended to use on systems with iBFT
    firmware together with STARTMODE=nfsroot.
  - Documented BOOTPROTO=ibft (fate#308283,bnc#542225), dhcp4 & 6
    and CIDR/IPv6 route notation in ifcfg.6 and routes.5 man pages.
  - Improved network/config and network/dhcp variable documentation
    adding notes, that the NetworkManager and the dhclient started
    by the NetworkManager are not using any sysconfig settings
  - Documented netconfig DNS service ranking (fate#306342).
  - Added racoon to netconfig dns ranking defaults (bnc#550706).
  - Fixed spelling mistake in ifcfg.template (bnc#537428).
  - Fixed typo in convert_persistent_name_rules script causing to
    generate persistent name rules on update, not matching MAC
    address (bnc#546575).
* Wed Nov 11 2009
  - Added ar9170* to wpa_supplicant wext driver mapping (bnc#546561).
* Wed Nov 11 2009
  - version 0.73.1
  - Implemented if-up.d/ndp-proxy plugin required to set proxy-ndp
    (ipv6) and proxy-arp (ipv4) adresses in a xen routed setup
  - Changed to use NM_ONLINE_TIMEOUT="30" by default (fate#307610).
  - Improved netconfig update -m filter/usage text (fate#306274),
    improved netconfig usage text to show active modules and module
    groups and to print debug messges about disabled/skipped modules.
  - First implementation of netconfig DNS service ranking allowing
    to specify which service provide preffered, e.g. vpn, and which
    fallback settings, e.g. avahi (fate#306342).
    Cleaned up netconfig.d/nis and ntp-runtime modules, apply policy
    with disabled filename glob expansion.
* Fri Oct 09 2009
  - Fixed support of eth0.VLAN interface name schema as well as custom
    names, documented it in the ifcfg-vlan(5) manual page (bnc#534032,
* Tue Oct 06 2009
  - version 0.73.0
  - Implemented netconfig update -m <module|prefix> filter
* Fri Oct 02 2009
  - Fixed to check for 'iw' utility only when it is required to set
    the wireless regulatory domain (bnc#539669).
* Fri Oct 02 2009
  - Fixed typo in ifstatus causing to return bad code (bnc#542230).
  - Blacklisted mISDN modules in /etc/modprobe.d/50-blacklist.conf
* Mon Sep 28 2009
  - build with -fno-strict-aliasing
* Tue Sep 22 2009
  - Fixed to just reload bind instead of try-restart in netconfig
* Tue Sep 15 2009
  - version 0.72.4
  - Added note to WIRELESS_REGULATORY_DOMAIN variable description in
    /etc/sysconfig/network/config, that it needs the new nl80211 wpa
    driver, that can be enabled using the WIRELESS_WPA_DRIVER ifcfg
    variable on a per interface basis (bnc#537708).
  - Fixed typo in md-on-iscsi-automount 81-mount.rules (bnc#509495).
* Wed Sep 09 2009
  - Implemented support to set the wireless regulatory domain using
    WIRELESS_REGULATORY_DOMAIN network/config variable (fate#305301).
* Thu Sep 03 2009
  - Added check for hostname changes to avoid a syslog reload in
    dhcpcd-hook when it didn't changed (fate#305702,bnc#466198).
  - Fixed waiting for successful connection in NetworkManager in
    the /etc/init.d/network script by removing nm-online's --exit
    option, that caused to exit immediately instead of waiting up
    to NM_ONLINE_TIMEOUT seconds, because the NetworkManager has
    been started just now and not ready yet (bnc#515629).
  - Added additional dhcp client specific start options variables
    DHCPCD-, DHCLIENT- and DHCP6C_USER_OPTIONS, enabling the user
    to set custom options in special cases (bnc#524695).
* Thu Aug 13 2009
  - version 0.72.3
  - Updated kernel driver to wpa_supplicant driver name mappings,
    added WIRELESS_WPA_DRIVER ifcfg variable allowing the user to
    specify/override the wpa driver (bnc#477833, bnc#481380).
  - Fixed redirection in ifdown-bonding, remove_bond function.
  - Improved to use faster pgrep in dhcp searching functions
* Wed Aug 12 2009
  - version 0.72.2
  - Marked tap interfaces as supported in rcnetwork localfs flow,
    to start a bridge with tap port in localfs flow (bnc#522225).
  - Fixed spec file to remove the HOTPLUG_CHECK_FILESYSTEMS and
    HOTPLUG_MOUNT_FSTAB variables from /etc/sysconfig/storage
    instead of removing of the complete file (bnc#528759).
  - Disabled installation of obsolete, README.s390,
    getcfg, hwup and modify_resolvconf manual pages. Updated and
    moved README.hwcfg_and_device_initialisation to package docs.
  - Disabled installation of the obsolete hwup script (bnc#483774,
* Wed Aug 12 2009
  - version 0.72.1
  - Fixed netconfig regex checks to work with some non-English (e.g.
    Estonian) locales and to allow spaces in lease file (bnc#488257).
  - Applied fix for the obsolete hwup utility to work with ccwgroup
    (qeth,lcs,ctc) devices on s390x (bnc#483774).
  - Applied patch for udev 81-mount.rules to allow md devices on
    iscsi to automount (bnc#509495).
  - Fixed dhclient6 variable typos in ifup-dhcp (bnc#524691).
  - Improved IFPLUGD_PRIORITY documentation in ifcfg(5) man page.
  - Improved the NETCONFIG_DNS_FORWARDER documentation to list the
    valid settings in netconfig(8) man page (bnc#507979).
  - Fixed scripts/extradebug to avoid huge files it created.
  - Changed is_iface_available() to use interface type only
  - Changed to use /dev/.sysconfig/network instead of the POSIX shm
    path /dev/shm/sysconfig, that may be a dedicated file system
* Tue Jun 30 2009
  - Applied fastboot patch from Moblin:Factory to avoid a sleep.
* Sun Jun 14 2009
  - drop (already unused) libsysfs from build
* Wed Jun 10 2009
  - version 0.72.0
  - Improved to use /etc/sysconfig/network/scripts/firewall hook
    link for all optional calls to the firewall script allowing
    the user to point the link to another script. SuSEfirewall2
    provides the script and the link by default (bnc#485450).
  - Improved makefiles and configure script, added more tests.
* Mon May 18 2009
  - Improved ifup -o hotplug to filter by interface type, updated
    77-network.rules udev rule (fate#305947).
* Wed May 13 2009
  - Changed to exit in ifup when network manager is enabled/active.
  - Removed obsolete nm "up" notification and NM_CONTROLLED variable.
* Thu Apr 30 2009
  - Use usleep for more often
* Tue Mar 24 2009
  - version 0.71.15
  - Added /etc/modprobe.d/50-ipv6.conf config (noreplace install)
    with IPv6 enabled by default; added renaming of yast2-network
    created ipv6 file to 50-ipv6.conf in post-install (bnc#485947).
  - Fixed overlapping messages in rcnetwork output (bnc#406887).
  - Fixed ifup-wireless to not set nick by default that breaks
    several drivers (bnc#478513).
  - Fixed ifup-wireless to set ap to 'off' instead to 'any' for
    the madwifi driver that does not support 'any' (bnc#402438).
  - Fixed network scripts to handle dummy interfaces (bnc#436857).
  - Fixed ifroute script parsing of final lines without EOL in
    ifroute files (bnc#467165).
* Mon Mar 09 2009
  - renamed modprobe config to /etc/modprobe.d/50-blacklist.conf
    (required by new module-init-tools).



Generated by rpm2html 1.8.1

Fabrice Bellet, Sat Apr 9 10:38:52 2022