athcool-0.3.12-13.mga8 RPM for i586

From Mageia 8 for i586 / media / core / release

athcool is a small utility, enabling/disabling Powersaving mode
for AMD Athlon/Duron processors.

Since enabling Powersaving mode, you can save power consumption,
lower CPU temperature when CPU is idle.

Powersaving works if your kernel support ACPI (APM not work),
because athcool only set/unset "Disconnect enable when STPGNT detected"
bits in the Northbridge of Chipset. To really save power, someone
has to send the STPGNT signal when idle.
This is done by the ACPI subsystem when C2 state entered.

WARNING: Depending on your motherboard and/or hardware components,
enabling powersaving mode may cause:

- noisy or distorted sound playback
- a slowdown in harddisk performance
- system locks or instability

If you met those problems, you should not use athcool.
Please use athcool AT YOUR OWN RISK!

Provides

• athcool
• athcool(x86-32)

Requires

• libc.so.6
• libc.so.6(GLIBC_2.0)
• libc.so.6(GLIBC_2.3.4)
• libpci.so.3
• libpci.so.3(LIBPCI_3.0)
• libpci.so.3(LIBPCI_3.3)
• libpci.so.3(LIBPCI_3.5)
• rpmlib(CompressedFileNames) <= 3.0.4-1
• rpmlib(FileDigests) <= 4.6.0-1
• rpmlib(PayloadFilesHavePrefix) <= 4.0-1
• rpmlib(PayloadIsZstd) <= 5.4.18-1

License

GPLv2

Changelog

* Fri Mar 06 2020 daviddavid <daviddavid> 0.3.12-13.mga8
  + Revision: 1554279
  - Mageia 8 Mass Rebuild
* Wed Oct 03 2018 pterjan <pterjan> 0.3.12-12.mga7
  + Revision: 1316074
  - Mageia 7 Mass Rebuild
* Tue Jun 19 2018 pterjan <pterjan> 0.3.12-11.mga7
  + Revision: 1238208
  - Restrict to %ix86, this is hardware specific for Athlon/Duron
* Mon Jun 18 2018 wally <wally> 0.3.12-10.mga7
  + Revision: 1237843
  - only build on ix86

Files

/usr/lib/.build-id
/usr/lib/.build-id/3b
/usr/lib/.build-id/3b/e8b7c146f61555e81bbdaf583c66aa16b7565c
/usr/sbin/athcool
/usr/share/doc/athcool
/usr/share/doc/athcool/README
/usr/share/man/man8/athcool.8.xz

Generated by rpm2html 1.8.1

Fabrice Bellet, Tue Apr 9 16:22:09 2024