| Index | index by Group | index by Distribution | index by Vendor | index by creation date | index by Name | Mirrors | Help | Search |
| Name: kexec-tools | Distribution: CentOS |
| Version: 2.0.25 | Vendor: CentOS |
| Release: 9.el9 | Build date: Mon Dec 19 05:52:13 2022 |
| Group: Unspecified | Build host: x86-02.stream.rdu2.redhat.com |
| Size: 1345246 | Source RPM: kexec-tools-2.0.25-9.el9.src.rpm |
| Packager: builder@centos.org | |
| Summary: The kexec/kdump userspace component | |
kexec-tools provides /sbin/kexec binary that facilitates a new kernel to boot using the kernel's kexec feature either on a normal or a panic reboot. This package contains the /sbin/kexec binary and ancillary utilities that together form the userspace component of the kernel's kexec feature.
GPLv2
* Mon Dec 19 2022 Tao Liu <ltao@redhat.com> - 2.0.25-9
- Add virtiofs to kdump supported-kdump-targets.txt
- dracut-module-setup.sh: stop overwriting dracut's trap handler
* Wed Dec 07 2022 Tao Liu <ltao@redhat.com> - 2.0.25-8
- kexec-tools: ppc64: remove rma_top limit
- kdumpctl: Optimize _find_kernel_path_by_release regex string
- kdump.conf: use a simple generator script to maintain
* Fri Nov 25 2022 Tao Liu <ltao@redhat.com> - 2.0.25-7
- Don't run kdump_check_setup_iscsi in a subshell in order to collect needed network interfaces
* Thu Nov 24 2022 Tao Liu <ltao@redhat.com> - 2.0.25-6
- Simplify setup_znet by copying connection profile to initrd
- Wait for the network to be truly ready before dumping vmcore
- Address the cases where a NIC has a different name in kdump kernel
- Reduce kdump memory consumption by only installing needed NIC drivers
- Reduce kdump memory consumption by not letting NetworkManager manage unneeded network interfaces
- Set up kdump network by directly copying NM connection profile to initrd
- Stop dracut 35network-manager from running nm-initrd-generator
- Apply the timeout configuration of nm-initrd-generator
- Determine whether IPv4 or IPv6 is needed
- Add functions to copy NetworkManage connection profiles to the initramfs
- Fix error for vlan over team network interface
* Fri Nov 11 2022 Tao Liu <ltao@redhat.com> - 2.0.25-5
- Don't check fs modified when dump target is lvm2 thinp
- Add dependency of dracut lvmthinpool-monitor module
- lvm.conf should be check modified if lvm2 thinp enabled
- Add lvm2 thin provision dump target checker
- Fix the sync issue for dump_fs
* Tue Nov 01 2022 Tao Liu <ltao@redhat.com> - 2.0.25-4
- Rebase makedumpfile to 1.7.2
- Include the memory overhead cost of cryptsetup when estimating the memory requirement for LUKS-encrypted target
- Choosing the most memory-consuming key slot when estimating the memory requirement for LUKS-encrypted target
- Skip reading /etc/defaut/grub for s390x
- Only try to reset crashkernel for osbuild during package install
- Prefix reset-crashkernel-{for-installed_kernel,after-update} with underscore
- use /run/ostree-booted to tell if scriptlet is running on OSTree system
* Wed Oct 26 2022 Tao Liu <ltao@redhat.com> - 2.0.25-3
- virtiofs support for kexec-tools
- Seperate dracut and dracut-squash compressor for zstd
* Mon Oct 17 2022 Tao Liu <ltao@redhat.com> - 2.0.25-2
- mkdumprd: Improve error messages on non-existing NFS target directories
- fadump: avoid non-debug kernel use for fadump case
* Wed Sep 21 2022 Tao Liu <ltao@redhat.com> - 2.0.25-1
- Rebase kexec-tools to v2.0.25
- remind the users to run zipl after calling grubby on s390x
- remove useless --zipl when calling grubby to update kernel command line
- skip updating /etc/default/grub for s390x
- Allow to update kexec-tools using virt-customize for cloud base image
- kdumpctl: make the kdump.log root-readable-only
* Tue Jul 12 2022 Tao Liu <ltao@redhat.com> - 2.0.24-5
- kdump-lib: use non-debug kernels first
- kdump-lib: fix typo in variable name
* Wed Jun 15 2022 Tao Liu <ltao@redhat.com> - 2.0.24-4
- crashkernel: optimize arm64 reserved size if PAGE_SIZE=4k
- kdump-lib.sh: Check the output of blkid with sed instead of eval
* Tue Jun 07 2022 Tao Liu <ltao@redhat.com> - 2.0.24-3
- kdump.sysconfig*: add ignition.firstboot to KDUMP_COMMANDLINE_REMOVE
* Mon May 23 2022 Tao Liu <ltao@redhat.com> - 2.0.24-2
- remove the upper bound of default crashkernel value example
- update fadump-howto
- update kexec-kdump-howto
- update crashkernel-howto
- add man documentation for kdumpctl get-default-crashkernel
- improve get_recommend_size
- fix a calculation error in get_system_size
* Thu May 05 2022 Tao Liu <ltao@redhat.com> - 2.0.24-1
- Rebase kexec-tools to v2.0.24
- Rebase makedumpfile to 1.7.1
- Avoid false-positive mem_section validation with vmlinux
* Fri Apr 08 2022 Tao Liu <ltao@redhat.com> - 2.0.23-10
- try to update the crashkernel in GRUB_ETC_DEFAULT after kexec-tools updates the default crashkernel value
- address the case where there are multiple values for the same kernel arg
- s390: add support for --reuse-cmdline
- use slurp_proc_file() in get_command_line()
- add slurp_proc_file()
- s390: use KEXEC_ALL_OPTIONS
- s390: add variable command line size
- util_lib/elf_info: harden parsing of printk buffer
- print error when reading with unsupported compression
- use cycle detection when parsing the prink log_buf
- use pointer arithmetics for dump_dmesg
- add generic cycle detection
* Fri Feb 25 2022 Tao Liu <ltao@redhat.com> - 2.0.23-9
- makedumpfile: sadump, kaslr: fix failure of calculating kaslr_offset
* Mon Feb 21 2022 Tao Liu <ltao@redhat.com> - 2.0.23-8
- update kernel crashkernel in posttrans RPM scriptlet when updating kexec-tools
* Mon Feb 14 2022 Tao Liu <ltao@redhat.com> - 2.0.23-7
- fix incorrect usage of _get_all_kernels_from_grubby
- fix the mistake of swapping function parameters of read_proc_environ_var
* Wed Jan 26 2022 Tao Liu <ltao@redhat.com> - 2.0.23-6
- Revert "Remove trace_buf_size and trace_event from the kernel bootparameters of the kdump kernel"
- fix broken kdump_get_arch_recommend_size
- remove the upper bound of 102400T for the range in default crashkernel
- fix the error of parsing the container environ variable for osbuild
- mkdumprd (RHEL-only): add nvme module by force
- Remove dropped patches
- s390: handle R_390_PLT32DBL reloc entries in machine_apply_elf_rel()
- spec: add hostname.rpm into Recommends list
- move variable FENCE_KDUMP_SEND from kdump-lib.sh to kdump-lib-initramfs.sh
* Tue Jan 11 2022 Tao Liu <ltao@redhat.com> - 2.0.23-5
- Set zstd as recommented for kexec-tools
- fix "kdump: Invalid kdump config option auto_reset_crashkernel" error
- use grep -s to suppress error messages about nonexistent or unreadable files
* Thu Jan 06 2022 Tao Liu <ltao@redhat.com> - 2.0.23-4
- Set zstd as the default compression method for kdump initrd
- kdump-lib.sh: Escape '|' for 'failure_action|default' in is_dump_to_rootfs
- dracut-early-kdump-module-setup.sh: install xargs and kdump-lib-initramfs.sh
- update crashkernel-howto
- set up kernel crashkernel for osbuild in kernel hook
- reset kernel crashkernel for the special case where the kernel is updated right after kexec-tools
- try to reset kernel crashkernel when kexec-tools updates the default crashkernel value
- introduce the auto_reset_crashkernel option to kdump.conf
- rewrite reset_crashkernel to support fadump and to used by RPM scriptlet
- fix incorrect usage of rpm-ostree to update kernel command line parameters
- add helper functions to get kernel path by kernel release and the path of current running kernel
- add helper functions to get dump mode
- add a helper function to read kernel cmdline parameter from grubby --info
- provide kdumpctl get-default-crashkernel for kdump_anaconda_addon and RPM scriptlet
- factor out kdump_get_arch_recommend_crashkernel
- update default crashkernel value
- ppc64/ppc64le: drop cpu online rule in 40-redhat.rules in kdump initramfs
* Wed Dec 08 2021 Tao Liu <ltao@redhat.com> - 2.0.23-3
- Update eppic to latest upstream snapshot
- Update crashkernel-howto.txt
- Remove references to systemd-sysv-convert
- kdump/ppc64: suppress the error message "Could not find a registered notification tool" from servicelog_notify
- fadump: improve fadump-howto.txt about remote dump target setup
- Don't exit 1 from 92-crashkernel.install if zipl is absent (#1993505)
- Document/kexec-kdump-howto.txt: improve notes for kdump_pre and kdump_post scripts
* Fri Dec 03 2021 Tao Liu <ltao@redhat.com> - 2.0.23-2
- kdump/ppc64: migration action registration clean up
- kdump/ppc64: rebuild initramfs image after migration
- Update supported-kdump-targets.txt
- add keyutils as a weak dependency for POWER
- kdumpctl: enable secure boot on ppc64le LPARs
- kdump.sysconfig: make kexec_file_load as default option on arm64
- kdump.sysconfig: make kexec_file_load as default option on ppc64le
* Thu Nov 11 2021 Tao Liu <ltao@redhat.com> - 2.0.23-1
- Enable zstd compression for makedumpfile in kexec-tools.spec
- Update makedumpfile to 1.7.0
* Wed Nov 10 2021 Tao Liu <ltao@redhat.com> - 2.0.22-16
- fix broken extra_bins when installing multiple binaries
- mkdumprd: drop mountaddr/mountproto nfs mount options
- 92-crashkernel.install: fix exit code
- dracut-early-kdump.sh: make it POSIX compatible
- Add header comment for POSIX compliant scripts
- mkdumprd: allow using dash
- kdump-logger.sh: make it POSIX compatible
- kdump-lib.sh: reformat with shfmt
- kdump-lib.sh: declare and assign separately
- kdump-lib.sh: fix variable quoting issue
- Remove trace_buf_size and trace_event from the kernel bootparameters of the kdump kernel
- kdump-lib.sh: fix a few ambiguous or redundant code
- kdump-lib.sh: fix arithmetic operation syntax
- kdump-lib.sh: remove useless echo and cat
- kdump-lib.sh: rework nmcli related functions
- kdump-lib.sh: replace '[ ]' with '[[ ]]' and get rid of legacy ``
- kdump-lib-initramfs.sh: make it POSIX compatible
- dracut-kdump.sh: reformat with shfmt
- dracut-kdump.sh: make it POSIX compatible
- dracut-kdump.sh: POSIX doesn't support pipefail
- dracut-kdump.sh: Use stat instead of ls to get vmcore size
- dracut-kdump.sh: simplify dump_ssh
- dracut-kdump.sh: remove add_dump_code
- dracut-kdump.sh: don't put KDUMP_SCRIPT_DIR in PATH
- kdump-lib-initramfs.sh: move dump related functions to kdump.sh
- Merge kdump-error-handler.sh into kdump.sh
- kdump-lib-initramfs.sh: prepare to be a POSIX compatible lib
- bash scripts: reformat with shfmt
- bash scripts: declare and assign separately
- bash scripts: fix redundant exit code check
- bash scripts: fix variable quoting issue
- Don't use die in dracut-module-setup.sh
- bash scripts: replace '[ ]' with '[[ ]]' for bash scripts
- mkdumprd: display the absolute path of dump location in the check_user_configured_target()
- Don't iterate the whole /sys/devices just to find drm device
- mkdumprd: prompt the user to install nfs-utils when mounting NFS fs failed
- bash scripts: use $(...) notation instead of legacy `...`
- bash scripts: always use "read -r"
- bash scripts: get rid of unnecessary sed calls
- bash scripts: get rid of expr and let
- bash scripts: remove useless cat
- dracut-module-setup.sh: remove surrounding $() for subshell
- dracut-module-setup.sh: make iscsi check fail early if cd failed
- dracut-module-setup.sh: fix a loop over ls issue
- dracut-module-setup.sh: fix a ambiguous variable reference
- dracut-module-setup.sh: use "*" to expend array as string
- dracut-module-setup.sh: fix _bondoptions wrong references
- dracut-module-setup.sh: remove an unused variable
- dracut-module-setup.sh: rework kdump_get_ip_route_field
- mkfadumprd: make _dracut_isolate_args an array
- mkdumprd: use array to store ssh arguments in mkdir_save_path_ssh
- mkdumprd: remove an awk call in get_fs_size
- mkdumprd: fix multiple issues with get_ssh_size
- mkdumprd: remove some redundant echo
- mkdumprd: make dracut_args an array again
- mkdumprd: use kdump_get_conf_val to read config values
- kdumpctl: refine grep usage
- kdumpctl: fix fragile loops over find output
- kdumpctl: use kdump_get_conf_val to read config values
- kdump-lib.sh: use kdump_get_conf_val to read config values
- kdump-lib.sh: add a config value retrive helper
- kdump-lib.sh: add a config format and read helper
- Add a .editorconfig file
- Remove hard requirement on grubby
* Wed Sep 08 2021 Tao Liu <ltao@redhat.com> - 2.0.22-15
- Add file supported-kdump-targets.txt to kexec-tools
* Mon Aug 09 2021 Mohan Boddu <mboddu@redhat.com> - 2.0.22-14
- Rebuilt for IMA sigs, glibc 2.34, aarch64 flags
Related: rhbz#1991688
* Mon Aug 09 2021 Tao Liu <ltao@redhat.com> - 2.0.22-13
- Clear old crashkernl=auto in comment and doc
* Mon Aug 02 2021 Tao Liu <ltao@redhat.com> - 2.0.22-12
- kdumpctl: fix a typo
- kdump_get_arch_recommend_size uses crashkernel.default
* Mon Jul 26 2021 Tao Liu <ltao@redhat.com> - 2.0.22-11
- Make `dump_to_rootfs` wait for 90s for real
- Check the existence of /sys/bus/ccwgroup/devices/*/online beforehand
- kdump.sysconfig.s390: Remove "prot_virt" from kdump kernel cmdline
* Tue Jul 20 2021 Tao Liu <ltao@redhat.com> - 2.0.22-10
- fadump-init: clean up mount points properly
- fadump: kdumpctl should check the modules used by the fadump initramfs
- fadump: isolate fadump initramfs image within the default one
- Cleanup dead systemd services before start sysroot.mount
- Revert "Revert "x86_64: enable the kexec file load by default""
* Tue Jun 29 2021 Tao Liu <ltao@redhat.com> - 2.0.22-9
- Add a crashkernel-howto.txt doc
- Add a new hook: 92-crashkernel.install
- kdumpctl: Add kdumpctl reset-crashkernel
- Revert "kdump-lib.sh: Remove is_atomic"
- fix format issue in find_online_znet_device
- check the existence of /sys/bus/ccwgroup/devices before trying to find online network device
* Tue Jun 29 2021 Tao Liu <ltao@redhat.com> - 2.0.22-8
- check for invalid physical address of /proc/kcore when making ELF dumpfile
- Increase SECTION_MAP_LAST_BIT to 5
- kdumpctl: fix check_config error when kdump.conf is empty
- kdump-lib.sh: fix a warning in prepare_kdump_bootinfo()
* Wed Jun 23 2021 Tao Liu <ltao@redhat.com> - 2.0.22-7
- Write to `/var/lib/kdump` if $KDUMP_BOOTDIR not writable
* Wed Jun 16 2021 Tao Liu <ltao@redhat.com> - 2.0.22-6
- Add gating.yaml to RHEL-9 kexec-tools
- Iterate /sys/bus/ccwgroup/devices to tell if we should set up rd.znet
* Mon Jun 07 2021 Tao Liu <ltao@redhat.com> - 2.0.22-5
- Use a customized emergency shell
- Remove the kdump error handler isolation wrapper
- Don's try to restart dracut-initqueue if it's already there
* Thu May 27 2021 Tao Liu <ltao@redhat.com> - 2.0.22-4
- kdump-lib.sh: fix the case if no enough total RAM for kdump in get_recommend_size()
* Mon May 24 2021 Tao Liu <ltao@redhat.com> - 2.0.22-3
- kdumpctl: Add kdumpctl estimate
- mkdumprd: make use of the new get_luks_crypt_dev helper
- kdump-lib.sh: introduce a helper to get all crypt dev used by kdump
- kdump-lib.sh: introduce a helper to get underlying crypt device
- Revert "Always set vm.zone_reclaim_mode = 3 in kdump kernel"
* Fri May 14 2021 Tao Liu <ltao@redhat.com> - 2.0.22-2
- Stop reloading kdump service on CPU hotplug event for FADump
- Make dracut-squash required for kexec-tools
- Fix incorrect file permissions of vmcore-dmesg-incomplete.txt
- Disable CMA in kdump 2nd kernel
- update makedumpfile to v1.6.9
- (upstream/c9s) Warn the user if network scripts are used
- Set up bond cmdline by "nmcli --get-values"
- Set up dns cmdline by parsing "nmcli --get-values"
- Set up s390 znet cmdline by "nmcli --get-values"
- Add helper to get nmcli connection show cmd by ifname
- Add helper to get nmcli connection apath by ifname
- Add helper to get value by field using "nmcli --get-values"
* Thu May 13 2021 Tao Liu <ltao@redhat.com> - 2.0.22-1
- Update to kexec-tools 2.0.22
- rd.route should use the name from kdump_setup_ifname
- get kdump ifname once in kdump_install_net
- Implement IP netmask calculation to replace "ipcalc -m"
- kdump-lib.sh: introduce functions to return recommened mem size
* Sun Apr 25 2021 Tao Liu <ltao@redhat.com> - 2.0.21-7
- Fix incorrect vmcore permissions when dumped through ssh
- Fix incorrect permissions on kdump dmesg file
* Fri Apr 16 2021 Mohan Boddu <mboddu@redhat.com> - 2.0.21-6
- Rebuilt for RHEL 9 BETA on Apr 15th 2021. Related: rhbz#1947937
* Tue Jan 26 2021 Fedora Release Engineering <releng@fedoraproject.org> - 2.0.21-5
- Rebuilt for https://fedoraproject.org/wiki/Fedora_34_Mass_Rebuild
* Fri Jan 22 2021 Kairui Song <kasong@redhat.com> - 2.0.21-4
- dracut-module-setup.sh: enable ForwardToConsole=yes in fadump mode
- kdump.conf: add ipv6 example for nfs and ssh dump
- fix kdump failure of saving vmcore with the scp + ipv6 method
* Wed Jan 20 2021 Kairui Song <kasong@redhat.com> - 2.0.21-3
- module-setup.sh: don't polute the namespace unnecessarily
- module-setup.sh: don't source $dracutfunctions
- logger: source the logger file individually
- Fix dump_fs mount point detection and fallback mount
- Revert "Don's try to restart dracut-initqueue if it's already failed"
- Revert "Append both nofail and x-systemd.before to kdump mount target"
- Doc: Improve the kdump sysconfig document
- kdump.conf: Update doc about core_collector for ssh target
- Merge #4 `Make dracut-squash a weak dep`
- Fix a date error in the change log
* Fri Jan 08 2021 Kairui Song <kasong@redhat.com> - 2.0.21-2
- makedumpfile: make use of 'uts_namespace.name' offset in VMCOREINFO
- kdumpctl: fix a variable expansion in check_fence_kdump_config()
- Add BuildRequires: make
- Save the final failure information to log file if saving vmcore failed
* Wed Dec 23 2020 Kairui Song <kasong@redhat.com> - 2.0.21-1
- makedumpfile: printk: use committed/finalized state values
- makedumpfile: printk: add support for lockless ringbuffer
- dracut-module-setup.sh: Use systemctl call to replace ln_r
- Doc: improve mkdumprd man page
- Don's try to restart dracut-initqueue if it's already failed
- dracut-module-setup.sh: use auto6 for ipv6
/etc/kdump /etc/kdump.conf /etc/kdump/post.d /etc/kdump/pre.d /etc/makedumpfile.conf.sample /etc/sysconfig/kdump /usr/bin/kdumpctl /usr/lib/.build-id /usr/lib/.build-id/15 /usr/lib/.build-id/15/f46e99a18ea48effce25c411c1fb891885ed37 /usr/lib/.build-id/39 /usr/lib/.build-id/39/36c80d4043fa4b5194edf49fc8afb5c5ba34eb /usr/lib/.build-id/53 /usr/lib/.build-id/53/16f0f141606199c163b6a76678173e4e0775f1 /usr/lib/.build-id/d6 /usr/lib/.build-id/d6/01d8fecc9f6eb66954f680e0acade0d5b3885b /usr/lib/dracut/modules.d/99earlykdump /usr/lib/dracut/modules.d/99earlykdump/early-kdump.sh /usr/lib/dracut/modules.d/99earlykdump/module-setup.sh /usr/lib/dracut/modules.d/99kdumpbase /usr/lib/dracut/modules.d/99kdumpbase/kdump-capture.service /usr/lib/dracut/modules.d/99kdumpbase/kdump-emergency.service /usr/lib/dracut/modules.d/99kdumpbase/kdump-emergency.target /usr/lib/dracut/modules.d/99kdumpbase/kdump.sh /usr/lib/dracut/modules.d/99kdumpbase/module-setup.sh /usr/lib/dracut/modules.d/99kdumpbase/monitor_dd_progress /usr/lib/kdump /usr/lib/kdump/kdump-lib-initramfs.sh /usr/lib/kdump/kdump-lib.sh /usr/lib/kdump/kdump-logger.sh /usr/lib/kernel/install.d/60-kdump.install /usr/lib/kernel/install.d/92-crashkernel.install /usr/lib/systemd/system-generators/kdump-dep-generator.sh /usr/lib/systemd/system/kdump.service /usr/lib/udev/kdump-udev-throttler /usr/lib/udev/rules.d /usr/lib/udev/rules.d/98-kexec.rules /usr/lib64/eppic_makedumpfile.so /usr/sbin/kexec /usr/sbin/makedumpfile /usr/sbin/mkdumprd /usr/sbin/mkfadumprd /usr/sbin/vmcore-dmesg /usr/share/doc/kexec-tools /usr/share/doc/kexec-tools/News /usr/share/doc/kexec-tools/TODO /usr/share/doc/kexec-tools/crashkernel-howto.txt /usr/share/doc/kexec-tools/early-kdump-howto.txt /usr/share/doc/kexec-tools/fadump-howto.txt /usr/share/doc/kexec-tools/kdump-in-cluster-environment.txt /usr/share/doc/kexec-tools/kexec-kdump-howto.txt /usr/share/doc/kexec-tools/live-image-kdump-howto.txt /usr/share/doc/kexec-tools/supported-kdump-targets.txt /usr/share/kdump /usr/share/licenses/kexec-tools /usr/share/licenses/kexec-tools/COPYING /usr/share/makedumpfile /usr/share/makedumpfile/eppic_scripts /usr/share/makedumpfile/eppic_scripts/README /usr/share/makedumpfile/eppic_scripts/ap_messages_3_10_to_4_8.c /usr/share/makedumpfile/eppic_scripts/dir_names_3_10_to_3_13.c /usr/share/makedumpfile/eppic_scripts/dir_names_3_14_to_4_8.c /usr/share/makedumpfile/eppic_scripts/keyring_3_10_to_4_3.c /usr/share/makedumpfile/eppic_scripts/keyring_4_4_to_4_8.c /usr/share/makedumpfile/eppic_scripts/proc_names_3_10_to_4_8.c /usr/share/makedumpfile/eppic_scripts/tcp_sk_buf_3_10_to_4_8.c /usr/share/makedumpfile/eppic_scripts/udp_sk_buf_3_10_to_4_8.c /usr/share/makedumpfile/eppic_scripts/unix_sk_buff_3_10_to_4_8.c /usr/share/makedumpfile/eppic_scripts/vhost_net_buffers_3_10_to_3_18.c /usr/share/makedumpfile/eppic_scripts/vhost_net_buffers_3_19_to_4_8.c /usr/share/makedumpfile/eppic_scripts/vhost_scsi_buffers_3_10_to_4_8.c /usr/share/man/man5/kdump.conf.5.gz /usr/share/man/man5/makedumpfile.conf.5.gz /usr/share/man/man8/kdumpctl.8.gz /usr/share/man/man8/kexec.8.gz /usr/share/man/man8/makedumpfile.8.gz /usr/share/man/man8/mkdumprd.8.gz /usr/share/man/man8/vmcore-dmesg.8.gz /var/crash /var/lib/kdump
Generated by rpm2html 1.8.1
Fabrice Bellet, Wed Mar 22 02:53:44 2023