packETH-2.24-1.1 RPM for x86_64

From OpenSuSE Tumbleweed for x86_64

packETH is tool for generating packets to send over ethernet.

Provides

• packETH
• packETH(x86-64)

Requires

• libc.so.6()(64bit)
• libc.so.6(GLIBC_2.17)(64bit)
• libc.so.6(GLIBC_2.2.5)(64bit)
• libc.so.6(GLIBC_2.3)(64bit)
• libc.so.6(GLIBC_2.3.4)(64bit)
• libc.so.6(GLIBC_2.34)(64bit)
• libc.so.6(GLIBC_2.4)(64bit)
• libc.so.6(GLIBC_2.7)(64bit)
• libgdk-x11-2.0.so.0()(64bit)
• libglib-2.0.so.0()(64bit)
• libgobject-2.0.so.0()(64bit)
• libgtk-x11-2.0.so.0()(64bit)
• libm.so.6()(64bit)
• libm.so.6(GLIBC_2.2.5)(64bit)
• rpmlib(CompressedFileNames) <= 3.0.4-1
• rpmlib(FileDigests) <= 4.6.0-1
• rpmlib(PayloadFilesHavePrefix) <= 4.0-1
• rpmlib(PayloadIsZstd) <= 5.4.18-1

License

GPL-3.0-or-later

Changelog

* Fri Jun 28 2024 ming li <mli@suse.com>
  - Update to version 2.24
    * Update README.md
    * Fix GCC-10 / CFLAGS=-fno-common
    * replaced strncpy with memcpy
    * Prepare to migrate to GTK3
  - Remove e72195b573.patch and fixed this issue in 2.24
* Mon May 17 2021 Ferdinand Thiessen <rpm@fthiessen.de>
  - Update to version 2.1
    * packETHcli added burst mode (-m -6)
    * packETHcli added receiver option (mode -m -9) to count received
      packets
    * packETHcli added option to incluce pattern (predifined or custom)
      which can be checked by packETHcli in receiver mode if all packets
      that were sent were also correctly received at the receiver site
    * packETHcli - nanoseconds support
  - Replaced packeth-ftbs-gcc10.patch with e72195b573.patch
* Mon Jun 08 2020 Cristian Rodríguez <crrodriguez@opensuse.org>
  - packeth-ftbs-gcc10.patch: fix build with gcc >= 10
* Tue Dec 01 2015 p.drouand@gmail.com
  - Update to version 1.8.1
    * Using nano seconds resolution (if supported by the Linx Kernel version,
      otherwise micro seconds will be used). With nano seconds the desired
      bandwidth can be much closer to the actual one for all bandwidths
      selected. If the actual bandwidth differs from the desired one for
      more than 10% a warning is included in the status bar.
    * Interface dialog now displays all available interfaces not only
      interfaces with IP address assigned.
  - Remove packETH-non-void-return.patch; fixed on upstream release
* Wed Jan 14 2015 tchvatal@suse.com
  - Version bump to 1.8:
    * Fix the license statements
    * Various fixes without changelog
  - Cleanup a bit
  - Add patch:
    * packETH-non-void-return.patch
* Sat Jan 18 2014 tchvatal@suse.com
  - Version bump to 1.7.3:
    * no changelog provided.
  - Cleanup the spec to sort things out and use proper url for
    downloads
* Sat Nov 10 2012 tchvatal@suse.com
  - Set proper homepage as was spotted on merge request.
* Fri Nov 09 2012 tchvatal@suse.com
  - Initial commit of version 1.7.2. Required for ipv6 tests.

Files

/usr/bin/packETH
/usr/share/doc/packages/packETH
/usr/share/doc/packages/packETH/AUTHORS
/usr/share/doc/packages/packETH/CHANGELOG
/usr/share/licenses/packETH
/usr/share/licenses/packETH/COPYING
/usr/share/packeth
/usr/share/packeth/pixmaps
/usr/share/packeth/pixmaps/Build.xpm
/usr/share/packeth/pixmaps/Gen.xpm
/usr/share/packeth/pixmaps/X.xpm
/usr/share/packeth/pixmaps/donate.xpm
/usr/share/packeth/pixmaps/future.xpm
/usr/share/packeth/pixmaps/interface.xpm
/usr/share/packeth/pixmaps/load.xpm
/usr/share/packeth/pixmaps/preference.xpm
/usr/share/packeth/pixmaps/reset.xpm
/usr/share/packeth/pixmaps/save.xpm
/usr/share/packeth/pixmaps/save16.xpm
/usr/share/packeth/pixmaps/send.xpm
/usr/share/packeth/ui
/usr/share/packeth/ui/about_dialog.ui
/usr/share/packeth/ui/error_dialog.ui
/usr/share/packeth/ui/fileselection1.ui
/usr/share/packeth/ui/fileselection2.ui
/usr/share/packeth/ui/fileselection3.ui
/usr/share/packeth/ui/fragmentation_dialog.ui
/usr/share/packeth/ui/interface_dialog.ui
/usr/share/packeth/ui/sel1_dialog.ui
/usr/share/packeth/ui/tos_dialog.ui
/usr/share/packeth/ui/udp_payload_dialog.ui
/usr/share/packeth/ui/window1.ui

Generated by rpm2html 1.8.1

Fabrice Bellet, Sat Nov 23 00:04:24 2024