| Index | index by Group | index by Distribution | index by Vendor | index by creation date | index by Name | Mirrors | Help | Search |
| Name: libsgutils2-1_47-2 | Distribution: openSUSE Step 15 |
| Version: 1.47+5.d13bc56 | Vendor: openSUSE |
| Release: 3.4.1 | Build date: Wed Sep 7 14:17:40 2022 |
| Group: System/Libraries | Build host: obs-arm-5 |
| Size: 222108 | Source RPM: sg3_utils-1.47+5.d13bc56-3.4.1.src.rpm |
| Packager: https://bugs.opensuse.org | |
| Url: http://sg.danny.cz/sg/sg3_utils.html | |
| Summary: Library to hold functions common to the SCSI utilities | |
The sg3_utils package contains utilities that send SCSI commands to devices. As well as devices on transports traditionally associated with SCSI (e.g. Fibre Channel (FCP), Serial Attached SCSI (SAS) and the SCSI Parallel Interface(SPI)) many other devices use SCSI command sets. ATAPI cd/dvd drives and SATA disks that connect via a translation layer or a bridge device are examples of devices that use SCSI command sets. This subpackage contains the library of common sg_utils code, such as SCSI error processing.
BSD-3-Clause
* Wed Jun 01 2022 mwilck@suse.com
- Update to version 1.47+5.d13bc56:
* rescan-scsi-bus.sh: add timeout parameter (bsc#1199248)
* Mon Feb 21 2022 mwilck@suse.com
- Update to version 1.47+4.82fb156:
* rescan_scsi_bus.sh: restore numeric ordering of hosts (bsc#1196244)
* Tue Feb 08 2022 mwilck@suse.com
- Update to version 1.47+3.adb7276:
* rescan-scsi-bus.sh: fix garbled output (bsc#1195621)
* Tue Jan 04 2022 mwilck@suse.com
- Update to version 1.47+2.388b767:
* rescan-scsi-bus.sh: apply fix for '-r' (boo#1194293)
* _service: use openSUSE github repo again (with cherry-picks
from upstream)
* spec file: suppress commit ID in library version
* Thu Nov 11 2021 mwilck@suse.com
- Update to version 1.47:
* sg_rep_zones: add support for REPORT ZONE DOMAINS and
REPORT REALMS in this utility
* sg_raw: fix prints of NVMe NVM command names
* sg_logs: additions to Volume statistics lpage [ssc5r05c]
- additions to Command duration limits statistics log
page [spc6r06]
* sg_vpd: fix do_hex type on some recent pages
- zoned block dev char vpd: add zone alignment mode and
zone starting LBA granularity [zbc2r11]
* sg_read_buffer: fix --length= problem
* sg_dd, sgm_dd, sgp_dd: don't close negative file descriptors
* sg_dd: srand48_r() and mrand48_r() are GNU libc specific,
put conditional in so non-reentrant version used otherwise
- 'iflag=00,ff' places the 32 bit block address (big endian)
into each block
* sgp_dd: major rework, fix issue with error being ignored
- new: --chkaddr which checks for block address in each block
- add check for stdatomic.h presence in configure.ac
* sg_xcopy: tweak CSCD identification descriptor
* sg_get_elem_status: fix issue with '--maxlen=' option
- add 2 depopulation revocation health attributes [sbc5r01]
* transport error handling improved. To fix report of a
BAD_TARGET transport error but the utility still continued.
- introduce SG_LIB_TRANSPORT_ERROR [35] exit status
* several utilities: override '--maxlen=LEN' when LEN
is < 16 (or 4), take default (or 4) instead
* scripts: 55-scsi-sg3_id.rules remove outdated rule (bsc#1189297)
* sg_lib: add sg_scsi_status_is_good(),
sg_scsi_status_is_bad() and sg_get_zone_type_str()
* pt_linux: fix verify(BytChk=0) which Linux SNTL translated
to write, other SNTL cleanups
* pt_linux_nvme: fix fua setting
* pt: check_pt_file_handle() add return value of 5 for
- _service updates:
* re-enable service, hadn't been used for 1.46 release
* use upstream author's git repository, simplify versioning scheme
* use obscpio format
* Tue Apr 20 2021 info@paolostivanin.com
- Update to version 1.46:
* sg_rep_pip: new utility: report provisioning initialization
pattern command
* sg_turs: estimated time-to-ready [spc6r03]
- add --delay=MS option
* sg_requests: substantial cleanup
* sg_vpd: add Format presets and Concurrent positioning ranges
- add hot-pluggable field in standard Inquiry [spc6r05]
- fix vendor struct opts_t alignment
* sg_inq: add hot-pluggable field in standard Inquiry
* sg_dd: --verify : separate category for miscompare errors
- --verify : oflag=coe continue on miscompares, counts them
- add cdl= operand for command duration limit indexes
- add oflag=nocreat and conv=nocreat : OFILE must exist
- add iflag=00, ff, random flags
- setup conditional auto rule for getrandom()
- add command timeout after comma in time= operand
* sg_get_elem_status: add ralwd bit sbc4r20a
* sg_write_x: add dld bits to write(32) [sbc4r19a]
* sg_rep_zones: print invalid write pointer LBA as -1 rather
than 16 "f"s
* sg_opcodes: improve handling of RWCDLP field
* sg_ses: use fan speed factor field for calculation [ses4r04]
- add --all (-a) option, same action as --join
* sg_compare_and_write: add examples section to its manpage
* sg_modes: document '-s' option (same as '-6')
* sg_sanitize + sg_format: when --verbose given once report
probable success; without --verbose 'no news is good news'
* sg_zone: add Remove element and modify zones command
* sg_raw: increase maximum data-in and data-out buffer size
from 64 KB to 1 MB
- fix --cmdfile= handling
- add --nvm option to send commands from the NVM command set
- add --cmdset option to bypass cdb heuristic
- add --scan= first_opcode,last_opcode
* sg_pt_freebsd: allow device names without leading /dev/
thus fix for regression introduced in rev 731 (ver: 1.43)
* sg_pt_solaris+sg_pt_osf1: fix problem with clear_scsi_pt_obj()
which needs to remember is_nvme and dev_fd values
* sg_lib: add ZBC (2020) feature set entries
* sg_lib: restore elements and rebuild command added
* sg_lib,sg_pt: add partial_clear_scsi_pt_obj(),
get_scsi_pt_cdb_len() and get_scsi_pt_cdb_buf()
- add do_nvm_pt() for the NVM (sub-)command set
- tweak transport error handling in Linux
* sg_lib: Linux NVMe SNTL: add read, write and verify;
synchronize cache and write same translations
- add dummy start stop unit and test unit ready commands
- wire cache mpage's WCE to nvme 'volatile write cache'
- fix crash in sg_f2hex_arr() when fname not found
* sg_lib: reprint cdb with illegal request sense key
- asc/ascq match asc-num.txt @t10 20200708 [spc6r02]
* gcc-10: suppress warnings
* autoconf: upgrade version 2.69 to 2.70
* remove space from end of source lines for git-svn
* testing/sg_mrq_testing: new, for blocking mrq usage
* testing/sgs_dd: add evfd flags and eventfd processing
* testing: remove master-slave terminology for sgv4
* examples: add nvme_read_ctl.hex and nvme_write_ctl.hex
- Earlier SUSE fixes included in 1.46:
* 40-usb-blacklist.rules: use ID_SCSI_INQUIRY
(bsc#840054, bsc#1131482)
* Thu Apr 25 2019 mwilck@suse.com
- Update to version 1.45~815+5.6aa67ed:
* 59-fc-wwpn-id.rules: fix rule syntax (bsc#1133418)
- Update to svn r815:
* sg_opcodes: expand MLU (spc5r20)
* sg_inq: update version descriptors to spc5r21
* sg_vpd: 3pc VPD page add copy group descriptor
* sg_xcopy: add --fco (fast copy only) (spc5r20) and --app=1
* add nanosecond durations with SG3_UTILS_LINUX_NANO
- Earlier SUSE fixes now included upstream:
* 58-scsi-sg3_symlink.rules: don't skip multipath members
(bsc#1085212) [r815]
* rescan-scsi-bus.sh: terminate scanning if last lun got removed
(bsc#1087008) [r815]
* Add scsi-enable-target-scan.sh (bsc#954600) [r814]
* shellcheck cleanups for rescan-scsi-bus.sh [r814]
* Thu Apr 18 2019 jengelh@inai.de
- Replace old $RPM_* shell vars.
* Tue Mar 26 2019 mwilck@suse.com
- Spec file:
* add fc_wwpn_id (bsc#1005063)
* add lun masking service (bsc#954600)
* drop BuildRequires on udev
* replace unversioned "Provides: scsi" with versioned
- Update to version sg3_utils-1.45~803+31.564be3d:
* New versioning scheme for upstream pre-release:
1.45 - upstream release target, 803 - upstream svn id,
+31: SUSE commits on top of svn, 564be3d - git hash
* rescan-scsi-bus.sh: terminate scanning if last lun got removed
(bsc#1087008)
* 58-scsi-sg3_symlink.rules: don't skip multipath members
(bsc#1085212)
* Add scsi-enable-target-scan.sh (bsc#954600)
- Update to svn r803:
* sg_opcodes: expand MLU (18-102r0)
* sg_format: add --dcrt used twice (FOV=1 DCRT=0)
* rescan-scsi-bus: widen LUN 0 only scanning
(bsc#1069384)
- Earlier SUSE fixes included in 1.45:
* rescan-scsi-bus.sh: use LUN wildcard in idlist (bsc#1069384)
[svn: r795]
* sg_ses: fixup page decoding (bsc#1077787) [svn: r795]
* sg_ses: allow to decode raw data instead of reading from a device
(bsc#1050943) [svn: r795]
- Update to sg3_utils-1.44 [20180912] [svn: r791]
* rescan-scsi-bus.sh: harden code
- bump version to 20180615
- add --ignore-rev to ignore revision change
* introduce SG3_UTILS_DSENSE environment variable
* sginfo: don't open /dev/snapshot
* sg_timestamp: add '--no-timestamp' option
- add --elapsed and --hex options
* sg_wr_mode: add --rtd option for RTD bi
* sg_unmap: add --all=ST,RN[,LA] option
* sgm_dd, sg_dd: add --dry-run and --verbose options
* sg_inq+sg_vpd: update Extended inquiry data vpd page
* sg_ses: add 'hw_reset' and 'sw_reset' to enclosure services
controller electronics element type (18-047r1)
* sg_decode sense: add --cdb and --err=ES options
* sg_format: add --dry-run option
- extend --wait timeout for > 4TB disks
* sg_sanitize: add --dry-run option
- Earlier SUSE fixes included in 1.44:
* sg_inq: decode standard INQUIRY for CD-ROMs correctly
(bsc#1065448, bsc#1070431) [svn: r742]
* sg_inq: export all NAA values (bsc#1050767) [svn: r715]
* Add fc_wwpn_id to generate by-path links for fibrechannel
(bsc#1005063) (svn@715)
* sg_vpd: struct opts_t misaligment (bsc#1050943) [svn: r707]
* Fri Apr 06 2018 hare@suse.de
- Update to svn r763:
* More NVMe bugfixes
* sg_vpd: add device constituents vpd
* sg_raw: add --raw option
* sg_turs: add --low option
* sg_ses: decoding dpage fixes; add --quiet option
- rescan-scsi-bus.sh: Fixup syntax error (bsc#1087008)
- rescan-scsi-bus.sh: Fixes from shellcheck
* Mon Feb 12 2018 mwilck@suse.com
- dracut.conf: add whitespace at end of line (bsc#1080562)
* Fri Feb 09 2018 hare@suse.de
- Update to svn r751:
* NVMe bugfixes
* sg_seek: new utility
* sg_stream_ctl: new utility program
- 54-before-scsi-sg3_id.rules: compability rule for systemd
(bsc#1079873)
- Add dracut.conf to install new rule with dracut
* Thu Feb 08 2018 hare@suse.de
- Merge local patch with git repository
* Delete sgut-libversioning.diff
* Wed Feb 07 2018 hare@suse.de
- Update to svn r744:
* sg_write_x: new command for normal/atomic/orwrite etc
SCSI WRITE variants
* sg_ses: add NVMe support
* sg_inq: decode NVMe controller / NSIDs
- rescan_scsi_bus.sh: Fix manpage for --forcerescan
- 55-scsi-sg3_id.rules: fixes for scsi_id compability (bsc#1079873)
- 55-scsi-sg3_id.rules: run sg_inq for SPC devices (bsc#1079873)
* Fri Dec 22 2017 hare@suse.de
- sg_inq: check VPD page 0x0 before reading serial number
(bsc#1067839)
- sg_inq: add option '-o/--only' to skip reading VPD pages
(bsc#1067839)
- Revert 'postun' rpm spec changes after review
* Mon Dec 18 2017 hare@suse.de
- sg_inq: decode standard INQUIRY for CD-ROMs correctly (bsc#1070431)
- rescan-scsi-bus.sh: new option for ignore rev change
- rescan-scsi-bus.sh: Remove white space
- Add 'coreutils' to Requires (bsc#1072744)
- Add 'posttrans' to rpm spec (bsc#1071972)
* Wed Nov 29 2017 hare@suse.de
- Update to svn r730:
* Move testing utilities to 'testing' directory
* sg_opcode: check resid and trim response
* sg_rep_zones: expand --help option
* sg_mode: Add Out-of-band management control page
* sg_ses: filer join output on dpage element presence
* documentation cleanup
- rescan-scsi-bus.sh: Add '--ignore-rev' option
- Supplement SCSI modaliases (bsc#1065212)
* Fri Oct 13 2017 hare@suse.de
- Update to svn r721:
* Merge SUSE-specific patches with upstream svn
* sg_write_atomic: add new program for WRITE ATOMIC
* sg_bg_ctl: new background control command
* sg_ses: Improve output and option handling
* sg_logs: Add --vendor and decode more pages
* sg_get_lba_status: add new program
* Install rescan-scsi-bus.sh and scsi_logging_level per default
* Fri Aug 11 2017 hare@suse.de
- Drop patch merged with git repository
* drop add-lunsearch-filter-to-searchexisting.patch
- Drop rules included in git repository
* drop 40-usb-blacklist.rules
- Update to latest svn snapshot:
* sg_rdac: add sanity checks for -f=lun value
* sg_vpd improvements
* sg_ses: fix uninitialized struct
* sg_luns: resync with SAM and SPC drafts
* sg_vpd: fix struct misalignment introduced by --force
* sg_logs: add --vendor and fixup enumeration
- Port patches from SLES:
* Add systemd service files for LUN masking (bsc#954600)
* 55-scsi-sg3_id.rules: handle VPD page 0x80 correctly (bsc#1006469)
* scripts: added udev rules for legacy CCISS (bsc#1006175)
* rescan-scsi-bus.sh: Add lunsearch filter to findresized()
(bsc#1027176)
* Add fc_wwpn_id to generate by-path links for fibrechannel
(bsc#1005063)
* 55-scsi-sg3_id.rules: allow to override sysfs inquiry
(bsc#1012523)
* sg_inq: export all NAA values (bsc#1050767)
* Silence gcc warnings
* Mon Feb 20 2017 kukuk@suse.de
- Remove superfluous insserv PreReq.
* Wed Sep 07 2016 sparschauer@suse.de
- using "--lun" now works correctly (bsc#981452), adding patch:
* add-lunsearch-filter-to-searchexisting.patch
* Fri Apr 29 2016 hare@suse.de
- Update to new upstream release 1.43:
* sg_senddiag: add --timeout=SEC option
* sg_sanitize: add --timeout=SEC option
* sg_format: add --timeout=SEC option
* sg_decode sense: add --cdb option
* sg_ses: handle 2 bit EIIOE field in aes dpage
- expand join handling of SAS connectors and others
- expand join debug code
* sg_logs: fix volume statistics lpage when subpage
is zero (ssc5r02a); decode mount history log parameter
- decode Requested recovery, TapeAlert response, and
Service buffer information lpages for tape
- add '--pdt=DT' option
* sg_inq: fix potential unbounded loop in --export
- update version descriptor list to 20160420
* sg_inq+sg_vpd: update Extended inquiry data vpd
page (spc5r09)
- add --force option to bypass checking supported
vpd pages page and fetch requested page directly
* sg_reassign+sg_write_same: fix ULONG_MAX problem
* sg_turs+sg_requests: make both accept '--num=NUM'
and '--number=NUM' for mutual compatibility
* sg_zone: fix debug cdb naming
* sg_opcode: add '--enumerate' and '--pdt=' options
* sg_raw: add '--enumerate' option
* sg_lib: add SSC maintenance in/out sa names
- add read buffer(16) command mode names
- add sg_decode_transportid_str()
* sg_lib_data: sync asc/ascq codes with T10 20160425
* rescan-scsi-bus.sh: harden code
* clang --analyze static checker clean ups
* shellcheck cleanup on scripts
* automake: add AM_PROG_AR to configure.ac
- upgrade to version 1.15
- Include patches from upstream:
* sg_inq+sg_vpd: add --force option to bypass checking
of supported vpd pages
* sg_lib_data: add Bind and Unbind to service action out(16)
- Remove 0001-sg_vpd-sg_inq-Safe-VPD-page-access.patch; merged
with upstream.
* Thu Apr 28 2016 hare@suse.de
- sg_inq,sg_vpd: Safe VPD page access (bsc#945094)
* Add 0001-sg_vpd-sg_inq-Safe-VPD-page-access.patch
* Thu Feb 18 2016 hare@suse.de
- Update to new upstream release 1.42:
* sg_timestamp: new, to report or set timestamp
* sg_read_attr: new, supported by tape drives
* sg_stpg: fix truncation of target port field
* sg_inq: cope with unicode strings, udev fixes
- update version descriptor list to 20160125
- '--export': new entries for UUID descriptor
* sg_ses: add more field acronyms (ses3r11)
8 sg_logs: add Utilization lpage (sbc4r07)
- add Background operation lpage
- add Pending defects lpage
- add LPS misalignment lpage (sbc4r10)
- document '--All' ('-A') option
- rework lto tape vendor lpages
* sg_vpd: add Block limits extension VPD page
- add Device constituents VPD page
- add LB Protection VPD page (ssc 15-296r1)
- LB provisioning VPD page: expand LBPRZ, add
Minimum and Threshold percentage fields
- rework lto tape vendor VPD pages
* sg_inq+sg_vpd+sg_xcopy: add support for locally
assigned UUIDs in VPD page 0x83 (15-267r2)
* sg_sanitize: add --znr option (sbc4r07)
* sg_rep_zones: add --partial option (zbc-r04)
* sg_format: add ffmt option (sbc4r10)
- add support for FORMAT MEDIUM (for tape)
* sg_raw: document length relationships
* rescan-scsi-bus.sh: updates from Suse
* sg_lib_data: sync asc/ascq codes with T10 20151126
* sg_lib: add 'sense' categories for SCSI statuses:
condition met, busy, task set full, ACA active and
task aborted
- add pr2serr() extern
- change sg_get_sense_str() and dStrHexStr(), return
chars written (returned void previously)
- add sg_get_sense_descriptors_str() function
- add sg_get_designation_descriptor_str() function
- sg_get_desig_type_str()+sg_get_desig_assoc_str()
and sg_get_desig_code_set_str() added
- sg_get_opcode_sa_name() break out zoning in/out,
read attribute and read position service actions
* sg_cmds_extra: add sg_ll_format_unit2() for FFMT
* sg_pr2serr.h: new, to shorten fprintf(stderr, ...)
* sg_io_linux, sg_pt_linux: drop SUGGEST_* decoding
* sg_unaligned.h: add 48 bit support and gets for
variable length unsigned integers
- Delete sg3_utils-sg_inq-blacklist.diff; solved differently
- Added 40-usb-blacklist.rules (bsc#840054)
- Delete sg3_utils-58-scsi-sg3_symlink-fixup.patch;
merged with upstream
- Delete sg3_utils-flush-fixup.patch; merged with upstream
* Mon Nov 16 2015 m4mnux@gmail.com
- Add sg3_utils-flush-fixup.patch: Fix syntax error when -f (flush
failed multipath devices) used in command line.
* Mon Oct 05 2015 zaitor@opensuse.org
- Add sg3_utils-58-scsi-sg3_symlink-fixup.patch: Fix broken line in
script (boo#940833, boo#940834, boo#947947).
* Wed Jul 08 2015 jthumshirn@suse.com
- Update to new upstream release 1.41
* sg_zone: new utility for open, close and finish
zone commands introduced in zbc-r02
* sg_rep_zones and sg_reset_wp: change opcodes as
indicated in zbc-r02
* sg_read_buffer: add READ BUFFER(16) support (spc5r02)
* sg_logs: add --enumerate and acronyms
* allow decode from hex or binary in file
* decode environmental reporting + limits lpages
* sg_write_buffer: add --timeout=TO option
* sg_lib interface: add sg_lib_pdt_decay(), TPROTO_PCIE
plus support for zoning service actions
* sg_lib: in Linux blocked devices yield ENXIO from
ioctl(SG_IO), map to SG_LIB_CAT_NOT_READY
* clean up sg_warnings_stream handling
* sg_inq+sg_vpd: fix SCSI name string decoding in
device identification VPD page (0x83)
* increase sanity on Unit Serial number VPD page
* improve rdac vpd page reporting (vendor)
* sg_inq: improve NAA handling in dev_id VPD page
* update version descriptor list to 20150126
* Fri Feb 13 2015 jengelh@inai.de
- Update to ne wupstream release 1.40
* New utilities: sg_write_verify (for WRITE AND VERIFY),
sg_ses_microcode, sg_sat_read_gplog.
* sg_senddiag gained the --maxlen= and --page=PG options
* sg_opcodes gained the --compact field
* sg_inq: expand Block limits VPD page output
- Drop sg3_utils-fix-missing-rule-for-scsi_serial-partitions.patch,
sg3_utils-Fixup-formatting-of-invalid-VPD-page-0x83.patch,
sg3_utils-Do-not-export-long-identifiers.patch
(merged upstream)
- Replace symbol version hack (it forced lockstep updates) by
sgut-libversioning.diff (allows parallel installation).
* Sun Jan 04 2015 lnussel@suse.de
- blacklist some usb controllers that don't like sg_inq (bnc#840054)
Add: sg3_utils-sg_inq-blacklist.diff
/usr/lib/libsgutils2-1.47.so.2 /usr/lib/libsgutils2-1.47.so.2.0.0
Generated by rpm2html 1.8.1
Fabrice Bellet, Tue Jul 9 17:26:31 2024