Index index by Group index by Distribution index by Vendor index by creation date index by Name Mirrors Help Search

systemd-presets-branding-openSUSE-12.2-lp151.13.2 RPM for noarch

From OpenSuSE Leap 15.1 for noarch

Name: systemd-presets-branding-openSUSE Distribution: openSUSE Leap 15.1
Version: 12.2 Vendor: openSUSE
Release: lp151.13.2 Build date: Mon Jan 28 00:30:11 2019
Group: System/Base Build host: morla3
Size: 184 Source RPM: systemd-presets-branding-openSUSE-12.2-lp151.13.2.src.rpm
Packager: https://bugs.opensuse.org
Summary: Systemd default presets for openSUSE
Default presets for systemd on openSUSE distribution.

These are the openSUSE specific presets. The default
presets needed for all SUSE based distributions can be
found in systemd-presets-branding-common-SUSE.

Provides

Requires

License

GPL-2.0-or-later

Changelog

* Wed Apr 25 2018 dimstar@opensuse.org
  - Enable appstream-sync-cache.service on all distros that install
    the service (boo#1090346).
* Thu Mar 08 2018 jason.record@suse.com
  - Enable hostinfo.service as well
* Thu Mar 08 2018 jason.record@suse.com
  - Enable hostinfo.timer
* Wed Feb 28 2018 meissner@suse.com
  - split out common service to be default enabled on all SUSE
    distributions from the branding. FATE#322139
* Mon Feb 05 2018 kukuk@suse.de
  - Enable backup-rpmdb.timer, backup-sysconfig.timer and
    check-battery.timer, previously cron.daily jobs.
* Tue Jan 02 2018 sbrabec@suse.com
  - Enable new kbdsettings.service (boo#1010880).
* Mon Jan 01 2018 wr@rosenauer.org
  - enable pcscd socket activation by default to support smartcards
    out of the box (boo#1063983)
* Fri Dec 29 2017 zren@suse.com
  - Enable lvm2-lvmpolld.socket by default (bsc#1074211)
* Tue Dec 19 2017 zren@suse.com
  - Enable lvm2-monitor.service by default (bsc#1072492)
* Tue Dec 12 2017 kukuk@suse.de
  - Don't disable services with preset-all in %posttrans, the network
    is special and would be disabled.
* Mon Dec 11 2017 kukuk@suse.de
  - If we do a fresh installation, call systemctl preset-all in the
    %posttrans section. Some services need to be installed before
    systemd or do not strictly require systemd, so systemd would only
    be installed after them and the systemd units of this package
    never enabled.
* Mon Dec 11 2017 kukuk@suse.de
  - Enable klog.service and rsyslog.service by default, currently
    they enable themself always in post install section.
* Wed Dec 06 2017 kukuk@suse.de
  - Enable btrfs-*.timer by default, switch from cron to systemd.timer
  - Enable btrfsmaintenance-refresh.service
* Thu Nov 09 2017 sckang@suse.com
  - Enable ModemManager.service by default (bsc#1038402).
* Fri Nov 03 2017 olaf@aepfle.de
  - Move common entries into default-SUSE.preset (bsc#1060676)
* Tue Oct 17 2017 olaf@aepfle.de
  - Sort entries with :'<,'>!sort -t ' ' -k 2 (bsc#1060676)
* Tue Jun 20 2017 kukuk@suse.de
  - Enable ca-certificates to run on boot and on demand to create
    database in /var/lib/ca-certificates
* Tue Mar 21 2017 meissner@suse.com
  - removed duplicated iscsid.socket iscsid.servicce (bsc#1030161)
* Fri Mar 17 2017 sbrabec@suse.com
  - Bump version to 12.2 to make version numbers consistent between
    SLE and Leap (boo#1029775).
  - Remove superfluous uuidd.service. uuidd.socket is sufficient
    (bsc#1012850#c8).
* Tue Feb 21 2017 zren@suse.com
  - Enable socket/service(s) for lvm2 (bsc#1011053)
* Fri Feb 10 2017 fbui@suse.com
  - Enable by default uuidd shipped by util-linux (bsc#1012850)
    util-linux was previously shipping a preset file enabling uuidd by
    default. This is now done here as other packages are not supposed to
    ship their own preset rules.
    Also increase the package version so util-linux can conflict with
    the previous versions and hence will be updated *after* the new
    version of the presets package is. This is important otherwise if
    util-linux removed its preset file first, then the presets package
    would believe a new change in the presets and you enable again
    uuidd.
* Tue Jan 24 2017 dimstar@opensuse.org
  - Enable the issue-generator.service by default: /etc/issue is in
    progress of no longer being a static file, but being generated by
    a service, which allows for much more flexible content (think
    ssh key fingerprint or similar).
* Thu Dec 15 2016 dimstar@opensuse.org
  - Fix pre/post scripts:
    + On %pre case, when updating from an old version of the package
      that did not yet contain
      %{_prefix}/lib/%{generic_name}/branding-preset-states, we can't
      start it. Add a check for execute permission on the script.
* Thu Dec 08 2016 fbui@suse.com
  - Import preset macros from systemd-rpm-macro and convert them into
    scripts.
    Presets are not supposed to be shipped by other packages as the
    default policy needs to be reviewed by the secteam. Therefore don't
    encourage packagers to do that and make those macros private to this
    package.
    Also convert them into real scripts so they're much easier to
    maintain and debug. Also working in %posttrans is unneeded as this
    package is assumed to be the only one to update the preset.
* Thu Dec 08 2016 fbui@suse.com
  - There's no need to reload the daemon configuration as presets are
    not part of the dameon config.
* Tue Nov 29 2016 meissner@suse.com
  - added snapper-cleanup.timer and snapper-timeline.timer (bsc#1011891)
* Tue Jun 14 2016 ken@suse.com
  - enable vmblock-fuse service for VMWare by default (bsc#986277)
* Thu Jun 09 2016 lnussel@suse.de
  - don't require systemd to avoid dependency loop (boo#983986)
* Tue May 31 2016 meissner@suse.com
  - added a prereq for coreutils to make sure the macro in %pre
    works when using touch and mkdir. (bsc#982337)
* Mon May 09 2016 trenn@suse.de
  - enable mcelog by default instead of using an udev rule on
    /dev/mcelog (bsc#976781)
* Thu Mar 24 2016 meissner@suse.com
  - enable remote-fs.target, getty@.service. (bsc#972489)
* Wed Dec 16 2015 lnussel@suse.de
  - don't enable ModemManager and wpa_supplicant. Both will be started
    on demand (bnc#717130)
* Wed Dec 16 2015 eich@suse.com
  - Add display-manager.service to defaults presets (boo#958880).
* Tue Dec 08 2015 sbrabec@suse.com
  - Enable fstrim.timer and disable fstrim.service. TRIM should be
    performed once a week and not on every boot (FATE#317727).
    http://www.spinics.net/lists/util-linux-ng/msg09133.html
* Tue Aug 04 2015 sbrabec@suse.com
  - Add %systemd_preset_pre and %systemd_preset_posttrans (fixes
    boo#921075 and all future requests to change service default).
* Wed Jul 15 2015 jkeil@suse.de
  - Enable updatedb timer for mlocate package
    * Replaces cron.daily script
* Wed Jul 15 2015 jkeil@suse.de
  - Enable timer for periodic password & group file integrity verification
* Wed Jul 15 2015 olaf@aepfle.de
  - Remove xendomains.service from systemd preset file because it
    conflicts with libvirt-guests.service (bnc#937371)
    Its up to the admin to run systemctl enable xendomains.service
* Tue Jun 30 2015 crrodriguez@opensuse.org
  - If selinux is used, restorecond should be enabled by default.
    The relevant unit only starts if the system was booted with
    selinux enabled
  - Do not start acpid by default, its functionality is provided
    by logind nowadays.
* Wed Apr 01 2015 crrodriguez@opensuse.org
  - Native systemd unit apparmor.service need to be enabled
    by default.
* Mon Mar 09 2015 meissner@suse.com
  - enabled smartd by default (bnc#921075)
* Tue Jan 13 2015 olaf@aepfle.de
  - enable xencommons and xendomains (bnc#897352)
* Fri Dec 19 2014 mlatimer@suse.com
  - enable vmtoolsd service for VMWare by default (bnc#901272)
* Wed Dec 03 2014 lwang@suse.com
  - remove: enable lvm2-lvmetad.service   (bnc#901859)
* Thu Nov 20 2014 gber@opensuse.org
  - enable storage-fixup.service by default due to conversion
* Thu Jun 26 2014 glin@suse.com
  - enable wpa_supplicant.service (bnc#860885 comment#20)
* Wed May 28 2014 lwang@suse.com
  - enable lvm2-lvmetad.socket (bnc#878473)
    enable lvm2-lvmetad.service
* Fri Apr 11 2014 meissner@suse.com
  - enable auditd, haveged and irqbalance services by default. bnc#872066
* Wed Apr 02 2014 crrodriguez@opensuse.org
  - Enable the logrotate.timer that replaces the cron-based
    activation by default.
* Fri Mar 07 2014 matwey.kornilov@gmail.com
  - Enable epmd.socket so that epmd.service can be properly
    socket-activated instead of forking by beam. The later leads to
    the issue when epmd is killed at the stop of the specific service
    and all erlang instances crashes as a consequence.
    Needed by erlang package. (bnc#869112)
* Thu Feb 13 2014 lduncan@suse.com
  - Enable iscsi daemon socket and iscsi service as installed,
    so that iscsid.service can be socket-activated. (bnc#853300)
* Sat Feb 01 2014 ohering@suse.de
  - Revert last change for hyper-v.rpm
    Both daemons are started on demand via udev rules.
* Wed Dec 18 2013 ohering@suse.de
  - Enable hv_kvp_daemon and hv_vss_daemon from hyper-v pkg
* Thu Oct 17 2013 lduncan@suse.com
  - Enable iscsid socket and iscsi service by default when
    installed (bnc#827654).
* Wed Jul 31 2013 fcrozat@suse.com
  - Enable ModemManager.service is enabled when installed (it will be
    dbus-activated by NM).
* Thu Jul 25 2013 fcrozat@suse.com
  - Rename main default file to 90-default-openSUSE.preset and move
    the "disable everything" part to a separate file
    "99-default-disable.preset". This allows fine tuning with
    additional files, if needed (same as Fedora).
* Fri May 03 2013 meissner@suse.com
  - as we have multiversion kernels enabled by default, we also
    need to enable purge-kernels by default (bnc#818317).
* Fri Feb 22 2013 mt@suse.com
  - Do not unconditionally enable NetworkManager service as this
    breaks running /etc/init.d/network on update (bnc#803058).
* Wed Oct 17 2012 fcrozat@suse.com
  - Change location of presets with latest systemd.
* Tue Sep 11 2012 aj@suse.de
  - Add nscd service (bnc#778981).
* Wed Jul 04 2012 fcrozat@suse.com
  - Add cups units (service, path and socket) (bnc#769346).
* Mon Dec 12 2011 fcrozat@suse.com
  - Add postfix (bnc#727403).
* Wed Oct 26 2011 lnussel@suse.de
  - don't enable sysstat by default (bnc#725791)
* Mon Oct 17 2011 fcrozat@suse.com
  - Add sysstat.service (bnc#723858).
* Sun Oct 16 2011 coolo@suse.com
  - buildignore branding for systemd to avoid bootstrap cycle
* Fri Oct 07 2011 fcrozat@suse.com
  - Add Yast2 FirstBoot and Second Stage.
* Thu Sep 29 2011 fcrozat@suse.com
  - Don't enable avahi-dnsconfd.service after all.
* Thu Sep 29 2011 fcrozat@suse.com
  - Enable avahi-daemon.service and avahi-dnsconfd.service
* Thu Sep 29 2011 fcrozat@suse.com
  - Enable cron.service
* Mon Sep 26 2011 fcrozat@suse.com
  - Initial package

Files

/usr/lib/systemd-presets-branding
/usr/lib/systemd/system-preset/90-default-openSUSE.preset


Generated by rpm2html 1.8.1

Fabrice Bellet, Mon Feb 10 08:22:32 2020